xref: /openbmc/u-boot/include/lcd.h (revision 6d0f6bcf)
1 /*
2  * MPC823 and PXA LCD Controller
3  *
4  * Modeled after video interface by Paolo Scaffardi
5  *
6  *
7  * (C) Copyright 2001
8  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9  *
10  * See file CREDITS for list of people who contributed to this
11  * project.
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License as
15  * published by the Free Software Foundation; either version 2 of
16  * the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26  * MA 02111-1307 USA
27  */
28 
29 #ifndef _LCD_H_
30 #define _LCD_H_
31 
32 extern char lcd_is_enabled;
33 
34 extern int lcd_line_length;
35 extern int lcd_color_fg;
36 extern int lcd_color_bg;
37 
38 /*
39  * Frame buffer memory information
40  */
41 extern void *lcd_base;		/* Start of framebuffer memory	*/
42 extern void *lcd_console_address;	/* Start of console buffer	*/
43 
44 extern short console_col;
45 extern short console_row;
46 
47 #if defined CONFIG_MPC823
48 /*
49  * LCD controller stucture for MPC823 CPU
50  */
51 typedef struct vidinfo {
52 	ushort	vl_col;		/* Number of columns (i.e. 640) */
53 	ushort	vl_row;		/* Number of rows (i.e. 480) */
54 	ushort	vl_width;	/* Width of display area in millimeters */
55 	ushort	vl_height;	/* Height of display area in millimeters */
56 
57 	/* LCD configuration register */
58 	u_char	vl_clkp;	/* Clock polarity */
59 	u_char	vl_oep;		/* Output Enable polarity */
60 	u_char	vl_hsp;		/* Horizontal Sync polarity */
61 	u_char	vl_vsp;		/* Vertical Sync polarity */
62 	u_char	vl_dp;		/* Data polarity */
63 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
64 	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
65 	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
66 	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
67 	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
68 
69 	/* Horizontal control register. Timing from data sheet */
70 	ushort	vl_wbl;		/* Wait between lines */
71 
72 	/* Vertical control register */
73 	u_char	vl_vpw;		/* Vertical sync pulse width */
74 	u_char	vl_lcdac;	/* LCD AC timing */
75 	u_char	vl_wbf;		/* Wait between frames */
76 } vidinfo_t;
77 
78 extern vidinfo_t panel_info;
79 
80 #elif defined CONFIG_PXA250
81 /*
82  * PXA LCD DMA descriptor
83  */
84 struct pxafb_dma_descriptor {
85 	u_long	fdadr;		/* Frame descriptor address register */
86 	u_long	fsadr;		/* Frame source address register */
87 	u_long	fidr;		/* Frame ID register */
88 	u_long	ldcmd;		/* Command register */
89 };
90 
91 /*
92  * PXA LCD info
93  */
94 struct pxafb_info {
95 
96 	/* Misc registers */
97 	u_long	reg_lccr3;
98 	u_long	reg_lccr2;
99 	u_long	reg_lccr1;
100 	u_long	reg_lccr0;
101 	u_long	fdadr0;
102 	u_long	fdadr1;
103 
104 	/* DMA descriptors */
105 	struct	pxafb_dma_descriptor *	dmadesc_fblow;
106 	struct	pxafb_dma_descriptor *	dmadesc_fbhigh;
107 	struct	pxafb_dma_descriptor *	dmadesc_palette;
108 
109 	u_long	screen;		/* physical address of frame buffer */
110 	u_long	palette;	/* physical address of palette memory */
111 	u_int	palette_size;
112 };
113 
114 /*
115  * LCD controller stucture for PXA CPU
116  */
117 typedef struct vidinfo {
118 	ushort	vl_col;		/* Number of columns (i.e. 640) */
119 	ushort	vl_row;		/* Number of rows (i.e. 480) */
120 	ushort	vl_width;	/* Width of display area in millimeters */
121 	ushort	vl_height;	/* Height of display area in millimeters */
122 
123 	/* LCD configuration register */
124 	u_char	vl_clkp;	/* Clock polarity */
125 	u_char	vl_oep;		/* Output Enable polarity */
126 	u_char	vl_hsp;		/* Horizontal Sync polarity */
127 	u_char	vl_vsp;		/* Vertical Sync polarity */
128 	u_char	vl_dp;		/* Data polarity */
129 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
130 	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
131 	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
132 	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
133 	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
134 
135 	/* Horizontal control register. Timing from data sheet */
136 	ushort	vl_hpw;		/* Horz sync pulse width */
137 	u_char	vl_blw;		/* Wait before of line */
138 	u_char	vl_elw;		/* Wait end of line */
139 
140 	/* Vertical control register. */
141 	u_char	vl_vpw;		/* Vertical sync pulse width */
142 	u_char	vl_bfw;		/* Wait before of frame */
143 	u_char	vl_efw;		/* Wait end of frame */
144 
145 	/* PXA LCD controller params */
146 	struct	pxafb_info pxa;
147 } vidinfo_t;
148 
149 extern vidinfo_t panel_info;
150 
151 #elif defined(CONFIG_MCC200)
152 typedef struct vidinfo {
153 	ushort	vl_col;		/* Number of columns (i.e. 160) */
154 	ushort	vl_row;		/* Number of rows (i.e. 100) */
155 
156 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
157 } vidinfo_t;
158 
159 #elif defined(CONFIG_ATMEL_LCD)
160 
161 typedef struct vidinfo {
162 	u_long vl_col;		/* Number of columns (i.e. 640) */
163 	u_long vl_row;		/* Number of rows (i.e. 480) */
164 	u_long vl_clk;	/* pixel clock in ps    */
165 
166 	/* LCD configuration register */
167 	u_long vl_sync;		/* Horizontal / vertical sync */
168 	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
169 	u_long vl_tft;		/* 0 = passive, 1 = TFT */
170 
171 	/* Horizontal control register. */
172 	u_long vl_hsync_len;	/* Length of horizontal sync */
173 	u_long vl_left_margin;	/* Time from sync to picture */
174 	u_long vl_right_margin;	/* Time from picture to sync */
175 
176 	/* Vertical control register. */
177 	u_long vl_vsync_len;	/* Length of vertical sync */
178 	u_long vl_upper_margin;	/* Time from sync to picture */
179 	u_long vl_lower_margin;	/* Time from picture to sync */
180 
181 	u_long	mmio;		/* Memory mapped registers */
182 } vidinfo_t;
183 
184 extern vidinfo_t panel_info;
185 
186 #endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
187 
188 /* Video functions */
189 
190 #if defined(CONFIG_RBC823)
191 void	lcd_disable	(void);
192 #endif
193 
194 
195 /* int	lcd_init	(void *lcdbase); */
196 void	lcd_putc	(const char c);
197 void	lcd_puts	(const char *s);
198 void	lcd_printf	(const char *fmt, ...);
199 
200 
201 /************************************************************************/
202 /* ** BITMAP DISPLAY SUPPORT						*/
203 /************************************************************************/
204 #if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
205 # include <bmp_layout.h>
206 # include <asm/byteorder.h>
207 #endif
208 
209 /*
210  *  Information about displays we are using. This is for configuring
211  *  the LCD controller and memory allocation. Someone has to know what
212  *  is connected, as we can't autodetect anything.
213  */
214 #define CONFIG_SYS_HIGH	0	/* Pins are active high			*/
215 #define CONFIG_SYS_LOW		1	/* Pins are active low			*/
216 
217 #define LCD_MONOCHROME	0
218 #define LCD_COLOR2	1
219 #define LCD_COLOR4	2
220 #define LCD_COLOR8	3
221 #define LCD_COLOR16	4
222 
223 /*----------------------------------------------------------------------*/
224 #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
225 # define LCD_INFO_X		0
226 # define LCD_INFO_Y		(BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
227 #elif defined(CONFIG_LCD_LOGO)
228 # define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
229 # define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
230 #else
231 # define LCD_INFO_X		(VIDEO_FONT_WIDTH)
232 # define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
233 #endif
234 
235 /* Default to 8bpp if bit depth not specified */
236 #ifndef LCD_BPP
237 # define LCD_BPP			LCD_COLOR8
238 #endif
239 #ifndef LCD_DF
240 # define LCD_DF			1
241 #endif
242 
243 /* Calculate nr. of bits per pixel  and nr. of colors */
244 #define NBITS(bit_code)		(1 << (bit_code))
245 #define NCOLORS(bit_code)	(1 << NBITS(bit_code))
246 
247 /************************************************************************/
248 /* ** CONSOLE CONSTANTS							*/
249 /************************************************************************/
250 #if LCD_BPP == LCD_MONOCHROME
251 
252 /*
253  * Simple black/white definitions
254  */
255 # define CONSOLE_COLOR_BLACK	0
256 # define CONSOLE_COLOR_WHITE	1	/* Must remain last / highest	*/
257 
258 #elif LCD_BPP == LCD_COLOR8
259 
260 /*
261  * 8bpp color definitions
262  */
263 # define CONSOLE_COLOR_BLACK	0
264 # define CONSOLE_COLOR_RED	1
265 # define CONSOLE_COLOR_GREEN	2
266 # define CONSOLE_COLOR_YELLOW	3
267 # define CONSOLE_COLOR_BLUE	4
268 # define CONSOLE_COLOR_MAGENTA	5
269 # define CONSOLE_COLOR_CYAN	6
270 # define CONSOLE_COLOR_GREY	14
271 # define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest	*/
272 
273 #else
274 
275 /*
276  * 16bpp color definitions
277  */
278 # define CONSOLE_COLOR_BLACK	0x0000
279 # define CONSOLE_COLOR_WHITE	0xffff	/* Must remain last / highest	*/
280 
281 #endif /* color definitions */
282 
283 /************************************************************************/
284 #ifndef PAGE_SIZE
285 # define PAGE_SIZE	4096
286 #endif
287 
288 /************************************************************************/
289 /* ** CONSOLE DEFINITIONS & FUNCTIONS					*/
290 /************************************************************************/
291 #if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
292 # define CONSOLE_ROWS		((panel_info.vl_row-BMP_LOGO_HEIGHT) \
293 					/ VIDEO_FONT_HEIGHT)
294 #else
295 # define CONSOLE_ROWS		(panel_info.vl_row / VIDEO_FONT_HEIGHT)
296 #endif
297 
298 #define CONSOLE_COLS		(panel_info.vl_col / VIDEO_FONT_WIDTH)
299 #define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * lcd_line_length)
300 #define CONSOLE_ROW_FIRST	(lcd_console_address)
301 #define CONSOLE_ROW_SECOND	(lcd_console_address + CONSOLE_ROW_SIZE)
302 #define CONSOLE_ROW_LAST	(lcd_console_address + CONSOLE_SIZE \
303 					- CONSOLE_ROW_SIZE)
304 #define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
305 #define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
306 
307 #if LCD_BPP == LCD_MONOCHROME
308 # define COLOR_MASK(c)		((c)	  | (c) << 1 | (c) << 2 | (c) << 3 | \
309 				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
310 #elif LCD_BPP == LCD_COLOR8
311 # define COLOR_MASK(c)		(c)
312 #else
313 # error Unsupported LCD BPP.
314 #endif
315 
316 /************************************************************************/
317 
318 #endif	/* _LCD_H_ */
319