xref: /openbmc/u-boot/include/lcd.h (revision 68fbc0e6)
1 /*
2  * MPC823 and PXA LCD Controller
3  *
4  * Modeled after video interface by Paolo Scaffardi
5  *
6  *
7  * (C) Copyright 2001
8  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
9  *
10  * See file CREDITS for list of people who contributed to this
11  * project.
12  *
13  * This program is free software; you can redistribute it and/or
14  * modify it under the terms of the GNU General Public License as
15  * published by the Free Software Foundation; either version 2 of
16  * the License, or (at your option) any later version.
17  *
18  * This program is distributed in the hope that it will be useful,
19  * but WITHOUT ANY WARRANTY; without even the implied warranty of
20  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
21  * GNU General Public License for more details.
22  *
23  * You should have received a copy of the GNU General Public License
24  * along with this program; if not, write to the Free Software
25  * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
26  * MA 02111-1307 USA
27  */
28 
29 #ifndef _LCD_H_
30 #define _LCD_H_
31 
32 extern char lcd_is_enabled;
33 
34 extern int lcd_line_length;
35 extern int lcd_color_fg;
36 extern int lcd_color_bg;
37 
38 /*
39  * Frame buffer memory information
40  */
41 extern void *lcd_base;		/* Start of framebuffer memory	*/
42 extern void *lcd_console_address;	/* Start of console buffer	*/
43 
44 extern short console_col;
45 extern short console_row;
46 extern struct vidinfo panel_info;
47 
48 extern void lcd_ctrl_init (void *lcdbase);
49 extern void lcd_enable (void);
50 extern int board_splash_screen_prepare(void);
51 
52 /* setcolreg used in 8bpp/16bpp; initcolregs used in monochrome */
53 extern void lcd_setcolreg (ushort regno,
54 				ushort red, ushort green, ushort blue);
55 extern void lcd_initcolregs (void);
56 
57 /* gunzip_bmp used if CONFIG_VIDEO_BMP_GZIP */
58 extern struct bmp_image *gunzip_bmp(unsigned long addr, unsigned long *lenp);
59 extern int bmp_display(ulong addr, int x, int y);
60 
61 /**
62  * Set whether we need to flush the dcache when changing the LCD image. This
63  * defaults to off.
64  *
65  * @param flush		non-zero to flush cache after update, 0 to skip
66  */
67 void lcd_set_flush_dcache(int flush);
68 
69 #if defined CONFIG_MPC823
70 /*
71  * LCD controller stucture for MPC823 CPU
72  */
73 typedef struct vidinfo {
74 	ushort	vl_col;		/* Number of columns (i.e. 640) */
75 	ushort	vl_row;		/* Number of rows (i.e. 480) */
76 	ushort	vl_width;	/* Width of display area in millimeters */
77 	ushort	vl_height;	/* Height of display area in millimeters */
78 
79 	/* LCD configuration register */
80 	u_char	vl_clkp;	/* Clock polarity */
81 	u_char	vl_oep;		/* Output Enable polarity */
82 	u_char	vl_hsp;		/* Horizontal Sync polarity */
83 	u_char	vl_vsp;		/* Vertical Sync polarity */
84 	u_char	vl_dp;		/* Data polarity */
85 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
86 	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
87 	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
88 	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
89 	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
90 
91 	/* Horizontal control register. Timing from data sheet */
92 	ushort	vl_wbl;		/* Wait between lines */
93 
94 	/* Vertical control register */
95 	u_char	vl_vpw;		/* Vertical sync pulse width */
96 	u_char	vl_lcdac;	/* LCD AC timing */
97 	u_char	vl_wbf;		/* Wait between frames */
98 } vidinfo_t;
99 
100 #elif defined(CONFIG_CPU_PXA25X) || defined(CONFIG_CPU_PXA27X) || \
101 	defined CONFIG_CPU_MONAHANS
102 /*
103  * PXA LCD DMA descriptor
104  */
105 struct pxafb_dma_descriptor {
106 	u_long	fdadr;		/* Frame descriptor address register */
107 	u_long	fsadr;		/* Frame source address register */
108 	u_long	fidr;		/* Frame ID register */
109 	u_long	ldcmd;		/* Command register */
110 };
111 
112 /*
113  * PXA LCD info
114  */
115 struct pxafb_info {
116 
117 	/* Misc registers */
118 	u_long	reg_lccr3;
119 	u_long	reg_lccr2;
120 	u_long	reg_lccr1;
121 	u_long	reg_lccr0;
122 	u_long	fdadr0;
123 	u_long	fdadr1;
124 
125 	/* DMA descriptors */
126 	struct	pxafb_dma_descriptor *	dmadesc_fblow;
127 	struct	pxafb_dma_descriptor *	dmadesc_fbhigh;
128 	struct	pxafb_dma_descriptor *	dmadesc_palette;
129 
130 	u_long	screen;		/* physical address of frame buffer */
131 	u_long	palette;	/* physical address of palette memory */
132 	u_int	palette_size;
133 };
134 
135 /*
136  * LCD controller stucture for PXA CPU
137  */
138 typedef struct vidinfo {
139 	ushort	vl_col;		/* Number of columns (i.e. 640) */
140 	ushort	vl_row;		/* Number of rows (i.e. 480) */
141 	ushort	vl_width;	/* Width of display area in millimeters */
142 	ushort	vl_height;	/* Height of display area in millimeters */
143 
144 	/* LCD configuration register */
145 	u_char	vl_clkp;	/* Clock polarity */
146 	u_char	vl_oep;		/* Output Enable polarity */
147 	u_char	vl_hsp;		/* Horizontal Sync polarity */
148 	u_char	vl_vsp;		/* Vertical Sync polarity */
149 	u_char	vl_dp;		/* Data polarity */
150 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
151 	u_char	vl_lbw;		/* LCD Bus width, 0 = 4, 1 = 8 */
152 	u_char	vl_splt;	/* Split display, 0 = single-scan, 1 = dual-scan */
153 	u_char	vl_clor;	/* Color, 0 = mono, 1 = color */
154 	u_char	vl_tft;		/* 0 = passive, 1 = TFT */
155 
156 	/* Horizontal control register. Timing from data sheet */
157 	ushort	vl_hpw;		/* Horz sync pulse width */
158 	u_char	vl_blw;		/* Wait before of line */
159 	u_char	vl_elw;		/* Wait end of line */
160 
161 	/* Vertical control register. */
162 	u_char	vl_vpw;		/* Vertical sync pulse width */
163 	u_char	vl_bfw;		/* Wait before of frame */
164 	u_char	vl_efw;		/* Wait end of frame */
165 
166 	/* PXA LCD controller params */
167 	struct	pxafb_info pxa;
168 } vidinfo_t;
169 
170 #elif defined(CONFIG_ATMEL_LCD) || defined(CONFIG_ATMEL_HLCD)
171 
172 typedef struct vidinfo {
173 	ushort vl_col;		/* Number of columns (i.e. 640) */
174 	ushort vl_row;		/* Number of rows (i.e. 480) */
175 	u_long vl_clk;	/* pixel clock in ps    */
176 
177 	/* LCD configuration register */
178 	u_long vl_sync;		/* Horizontal / vertical sync */
179 	u_long vl_bpix;		/* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8, 4 = 16 */
180 	u_long vl_tft;		/* 0 = passive, 1 = TFT */
181 	u_long vl_cont_pol_low;	/* contrast polarity is low */
182 	u_long vl_clk_pol;	/* clock polarity */
183 
184 	/* Horizontal control register. */
185 	u_long vl_hsync_len;	/* Length of horizontal sync */
186 	u_long vl_left_margin;	/* Time from sync to picture */
187 	u_long vl_right_margin;	/* Time from picture to sync */
188 
189 	/* Vertical control register. */
190 	u_long vl_vsync_len;	/* Length of vertical sync */
191 	u_long vl_upper_margin;	/* Time from sync to picture */
192 	u_long vl_lower_margin;	/* Time from picture to sync */
193 
194 	u_long	mmio;		/* Memory mapped registers */
195 } vidinfo_t;
196 
197 #elif defined(CONFIG_EXYNOS_FB)
198 
199 enum {
200 	FIMD_RGB_INTERFACE = 1,
201 	FIMD_CPU_INTERFACE = 2,
202 };
203 
204 enum exynos_fb_rgb_mode_t {
205 	MODE_RGB_P = 0,
206 	MODE_BGR_P = 1,
207 	MODE_RGB_S = 2,
208 	MODE_BGR_S = 3,
209 };
210 
211 typedef struct vidinfo {
212 	ushort vl_col;		/* Number of columns (i.e. 640) */
213 	ushort vl_row;		/* Number of rows (i.e. 480) */
214 	ushort vl_width;	/* Width of display area in millimeters */
215 	ushort vl_height;	/* Height of display area in millimeters */
216 
217 	/* LCD configuration register */
218 	u_char vl_freq;		/* Frequency */
219 	u_char vl_clkp;		/* Clock polarity */
220 	u_char vl_oep;		/* Output Enable polarity */
221 	u_char vl_hsp;		/* Horizontal Sync polarity */
222 	u_char vl_vsp;		/* Vertical Sync polarity */
223 	u_char vl_dp;		/* Data polarity */
224 	u_char vl_bpix;		/* Bits per pixel */
225 
226 	/* Horizontal control register. Timing from data sheet */
227 	u_char vl_hspw;		/* Horz sync pulse width */
228 	u_char vl_hfpd;		/* Wait before of line */
229 	u_char vl_hbpd;		/* Wait end of line */
230 
231 	/* Vertical control register. */
232 	u_char	vl_vspw;	/* Vertical sync pulse width */
233 	u_char	vl_vfpd;	/* Wait before of frame */
234 	u_char	vl_vbpd;	/* Wait end of frame */
235 	u_char  vl_cmd_allow_len; /* Wait end of frame */
236 
237 	unsigned int win_id;
238 	unsigned int init_delay;
239 	unsigned int power_on_delay;
240 	unsigned int reset_delay;
241 	unsigned int interface_mode;
242 	unsigned int mipi_enabled;
243 	unsigned int dp_enabled;
244 	unsigned int cs_setup;
245 	unsigned int wr_setup;
246 	unsigned int wr_act;
247 	unsigned int wr_hold;
248 	unsigned int logo_on;
249 	unsigned int logo_width;
250 	unsigned int logo_height;
251 	unsigned long logo_addr;
252 	unsigned int rgb_mode;
253 	unsigned int resolution;
254 
255 	/* parent clock name(MPLL, EPLL or VPLL) */
256 	unsigned int pclk_name;
257 	/* ratio value for source clock from parent clock. */
258 	unsigned int sclk_div;
259 
260 	unsigned int dual_lcd_enabled;
261 
262 } vidinfo_t;
263 
264 void init_panel_info(vidinfo_t *vid);
265 
266 #else
267 
268 typedef struct vidinfo {
269 	ushort	vl_col;		/* Number of columns (i.e. 160) */
270 	ushort	vl_row;		/* Number of rows (i.e. 100) */
271 
272 	u_char	vl_bpix;	/* Bits per pixel, 0 = 1 */
273 
274 	ushort	*cmap;		/* Pointer to the colormap */
275 
276 	void	*priv;		/* Pointer to driver-specific data */
277 } vidinfo_t;
278 
279 #endif /* CONFIG_MPC823, CONFIG_CPU_PXA25X, CONFIG_MCC200, CONFIG_ATMEL_LCD */
280 
281 extern vidinfo_t panel_info;
282 
283 /* Video functions */
284 
285 #if defined(CONFIG_RBC823)
286 void	lcd_disable	(void);
287 #endif
288 
289 
290 /* int	lcd_init	(void *lcdbase); */
291 void	lcd_putc	(const char c);
292 void	lcd_puts	(const char *s);
293 void	lcd_printf	(const char *fmt, ...);
294 void	lcd_clear(void);
295 int	lcd_display_bitmap(ulong bmp_image, int x, int y);
296 
297 /**
298  * Get the width of the LCD in pixels
299  *
300  * @return width of LCD in pixels
301  */
302 int lcd_get_pixel_width(void);
303 
304 /**
305  * Get the height of the LCD in pixels
306  *
307  * @return height of LCD in pixels
308  */
309 int lcd_get_pixel_height(void);
310 
311 /**
312  * Get the number of text lines/rows on the LCD
313  *
314  * @return number of rows
315  */
316 int lcd_get_screen_rows(void);
317 
318 /**
319  * Get the number of text columns on the LCD
320  *
321  * @return number of columns
322  */
323 int lcd_get_screen_columns(void);
324 
325 /**
326  * Set the position of the text cursor
327  *
328  * @param col	Column to place cursor (0 = left side)
329  * @param row	Row to place cursor (0 = top line)
330  */
331 void lcd_position_cursor(unsigned col, unsigned row);
332 
333 /* Allow boards to customize the information displayed */
334 void lcd_show_board_info(void);
335 
336 /* Return the size of the LCD frame buffer, and the line length */
337 int lcd_get_size(int *line_length);
338 
339 /************************************************************************/
340 /* ** BITMAP DISPLAY SUPPORT						*/
341 /************************************************************************/
342 #if defined(CONFIG_CMD_BMP) || defined(CONFIG_SPLASH_SCREEN)
343 # include <bmp_layout.h>
344 # include <asm/byteorder.h>
345 #endif
346 
347 /*
348  *  Information about displays we are using. This is for configuring
349  *  the LCD controller and memory allocation. Someone has to know what
350  *  is connected, as we can't autodetect anything.
351  */
352 #define CONFIG_SYS_HIGH	0	/* Pins are active high			*/
353 #define CONFIG_SYS_LOW		1	/* Pins are active low			*/
354 
355 #define LCD_MONOCHROME	0
356 #define LCD_COLOR2	1
357 #define LCD_COLOR4	2
358 #define LCD_COLOR8	3
359 #define LCD_COLOR16	4
360 
361 /*----------------------------------------------------------------------*/
362 #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
363 # define LCD_INFO_X		0
364 # define LCD_INFO_Y		(BMP_LOGO_HEIGHT + VIDEO_FONT_HEIGHT)
365 #elif defined(CONFIG_LCD_LOGO)
366 # define LCD_INFO_X		(BMP_LOGO_WIDTH + 4 * VIDEO_FONT_WIDTH)
367 # define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
368 #else
369 # define LCD_INFO_X		(VIDEO_FONT_WIDTH)
370 # define LCD_INFO_Y		(VIDEO_FONT_HEIGHT)
371 #endif
372 
373 /* Default to 8bpp if bit depth not specified */
374 #ifndef LCD_BPP
375 # define LCD_BPP			LCD_COLOR8
376 #endif
377 #ifndef LCD_DF
378 # define LCD_DF			1
379 #endif
380 
381 /* Calculate nr. of bits per pixel  and nr. of colors */
382 #define NBITS(bit_code)		(1 << (bit_code))
383 #define NCOLORS(bit_code)	(1 << NBITS(bit_code))
384 
385 /************************************************************************/
386 /* ** CONSOLE CONSTANTS							*/
387 /************************************************************************/
388 #if LCD_BPP == LCD_MONOCHROME
389 
390 /*
391  * Simple black/white definitions
392  */
393 # define CONSOLE_COLOR_BLACK	0
394 # define CONSOLE_COLOR_WHITE	1	/* Must remain last / highest	*/
395 
396 #elif LCD_BPP == LCD_COLOR8
397 
398 /*
399  * 8bpp color definitions
400  */
401 # define CONSOLE_COLOR_BLACK	0
402 # define CONSOLE_COLOR_RED	1
403 # define CONSOLE_COLOR_GREEN	2
404 # define CONSOLE_COLOR_YELLOW	3
405 # define CONSOLE_COLOR_BLUE	4
406 # define CONSOLE_COLOR_MAGENTA	5
407 # define CONSOLE_COLOR_CYAN	6
408 # define CONSOLE_COLOR_GREY	14
409 # define CONSOLE_COLOR_WHITE	15	/* Must remain last / highest	*/
410 
411 #else
412 
413 /*
414  * 16bpp color definitions
415  */
416 # define CONSOLE_COLOR_BLACK	0x0000
417 # define CONSOLE_COLOR_WHITE	0xffff	/* Must remain last / highest	*/
418 
419 #endif /* color definitions */
420 
421 /************************************************************************/
422 #ifndef PAGE_SIZE
423 # define PAGE_SIZE	4096
424 #endif
425 
426 /************************************************************************/
427 /* ** CONSOLE DEFINITIONS & FUNCTIONS					*/
428 /************************************************************************/
429 #if defined(CONFIG_LCD_LOGO) && !defined(CONFIG_LCD_INFO_BELOW_LOGO)
430 # define CONSOLE_ROWS		((panel_info.vl_row-BMP_LOGO_HEIGHT) \
431 					/ VIDEO_FONT_HEIGHT)
432 #else
433 # define CONSOLE_ROWS		(panel_info.vl_row / VIDEO_FONT_HEIGHT)
434 #endif
435 
436 #define CONSOLE_COLS		(panel_info.vl_col / VIDEO_FONT_WIDTH)
437 #define CONSOLE_ROW_SIZE	(VIDEO_FONT_HEIGHT * lcd_line_length)
438 #define CONSOLE_ROW_FIRST	(lcd_console_address)
439 #define CONSOLE_ROW_SECOND	(lcd_console_address + CONSOLE_ROW_SIZE)
440 #define CONSOLE_ROW_LAST	(lcd_console_address + CONSOLE_SIZE \
441 					- CONSOLE_ROW_SIZE)
442 #define CONSOLE_SIZE		(CONSOLE_ROW_SIZE * CONSOLE_ROWS)
443 #define CONSOLE_SCROLL_SIZE	(CONSOLE_SIZE - CONSOLE_ROW_SIZE)
444 
445 #if LCD_BPP == LCD_MONOCHROME
446 # define COLOR_MASK(c)		((c)	  | (c) << 1 | (c) << 2 | (c) << 3 | \
447 				 (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
448 #elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
449 # define COLOR_MASK(c)		(c)
450 #else
451 # error Unsupported LCD BPP.
452 #endif
453 
454 /************************************************************************/
455 
456 #endif	/* _LCD_H_ */
457