1 /* 2 * definitions for MPC8260 I/O Ports 3 * 4 * (in addition to those provided in <asm/immap_8260.h>) 5 * 6 * Murray.Jensen@cmst.csiro.au, 20-Oct-00 7 */ 8 9 /* 10 * this structure mirrors the layout of the five port registers in 11 * the internal memory map - see iop8260_t in <asm/immap_8260.h> 12 */ 13 typedef struct { 14 unsigned int pdir; /* Port Data Direction Register (35-3) */ 15 unsigned int ppar; /* Port Pin Assignment Register (35-4) */ 16 unsigned int psor; /* Port Special Options Register (35-5) */ 17 unsigned int podr; /* Port Open Drain Register (35-2) */ 18 unsigned int pdat; /* Port Data Register (35-3) */ 19 } ioport_t; 20 21 /* 22 * this macro calculates the address within the internal 23 * memory map (im) of the set of registers for a port (idx) 24 * 25 * the internal memory map aligns the above structure on 26 * a 0x20 byte boundary 27 */ 28 #ifdef CONFIG_MPC85xx 29 #define ioport_addr(im, idx) (ioport_t *)((uint)&(im->im_cpm_iop) + ((idx)*0x20)) 30 #else 31 #define ioport_addr(im, idx) (ioport_t *)((uint)&(im)->im_ioport + ((idx)*0x20)) 32 #endif 33 34 /* 35 * this structure provides configuration 36 * information for one port pin 37 */ 38 typedef struct { 39 unsigned char conf:1; /* if 1, configure this port */ 40 unsigned char ppar:1; /* Port Pin Assignment Register (35-4) */ 41 unsigned char psor:1; /* Port Special Options Register (35-2) */ 42 unsigned char pdir:1; /* Port Data Direction Register (35-3) */ 43 unsigned char podr:1; /* Port Open Drain Register (35-2) */ 44 unsigned char pdat:1; /* Port Data Register (35-2) */ 45 } iop_conf_t; 46 47 /* 48 * a table that contains configuration information for all 32 pins 49 * of all four MPC8260 I/O ports. 50 * 51 * NOTE: in the second dimension of this table, index 0 refers to pin 31 52 * and index 31 refers to pin 0. this made the code in the table look more 53 * like the table in the 8260UM (and in the hymod manuals). 54 */ 55 extern const iop_conf_t iop_conf_tab[4][32]; 56 57 typedef struct { 58 unsigned char port; 59 unsigned char pin; 60 int dir; 61 int open_drain; 62 int assign; 63 } qe_iop_conf_t; 64 65 #define QE_IOP_TAB_END (-1) 66