1 /* 2 * (C) Copyright 2008 Semihalf 3 * 4 * (C) Copyright 2000-2005 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 ******************************************************************** 9 * NOTE: This header file defines an interface to U-Boot. Including 10 * this (unmodified) header file in another file is considered normal 11 * use of U-Boot, and does *not* fall under the heading of "derived 12 * work". 13 ******************************************************************** 14 */ 15 16 #ifndef __IMAGE_H__ 17 #define __IMAGE_H__ 18 19 #include "compiler.h" 20 #include <asm/byteorder.h> 21 22 /* Define this to avoid #ifdefs later on */ 23 struct lmb; 24 25 #ifdef USE_HOSTCC 26 #include <sys/types.h> 27 28 /* new uImage format support enabled on host */ 29 #define IMAGE_ENABLE_FIT 1 30 #define IMAGE_ENABLE_OF_LIBFDT 1 31 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 32 #define CONFIG_FIT_ENABLE_SHA256_SUPPORT 33 #define CONFIG_SHA1 34 #define CONFIG_SHA256 35 36 #define IMAGE_ENABLE_IGNORE 0 37 #define IMAGE_INDENT_STRING "" 38 39 #else 40 41 #include <lmb.h> 42 #include <asm/u-boot.h> 43 #include <command.h> 44 45 /* Take notice of the 'ignore' property for hashes */ 46 #define IMAGE_ENABLE_IGNORE 1 47 #define IMAGE_INDENT_STRING " " 48 49 #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT) 50 #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT) 51 52 #endif /* USE_HOSTCC */ 53 54 #if IMAGE_ENABLE_FIT 55 #include <hash.h> 56 #include <libfdt.h> 57 #include <fdt_support.h> 58 # ifdef CONFIG_SPL_BUILD 59 # ifdef CONFIG_SPL_CRC32_SUPPORT 60 # define IMAGE_ENABLE_CRC32 1 61 # endif 62 # ifdef CONFIG_SPL_MD5_SUPPORT 63 # define IMAGE_ENABLE_MD5 1 64 # endif 65 # ifdef CONFIG_SPL_SHA1_SUPPORT 66 # define IMAGE_ENABLE_SHA1 1 67 # endif 68 # else 69 # define CONFIG_CRC32 /* FIT images need CRC32 support */ 70 # define IMAGE_ENABLE_CRC32 1 71 # define IMAGE_ENABLE_MD5 1 72 # define IMAGE_ENABLE_SHA1 1 73 # endif 74 75 #ifndef IMAGE_ENABLE_CRC32 76 #define IMAGE_ENABLE_CRC32 0 77 #endif 78 79 #ifndef IMAGE_ENABLE_MD5 80 #define IMAGE_ENABLE_MD5 0 81 #endif 82 83 #ifndef IMAGE_ENABLE_SHA1 84 #define IMAGE_ENABLE_SHA1 0 85 #endif 86 87 #if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \ 88 defined(CONFIG_SPL_SHA256_SUPPORT) 89 #define IMAGE_ENABLE_SHA256 1 90 #else 91 #define IMAGE_ENABLE_SHA256 0 92 #endif 93 94 #endif /* IMAGE_ENABLE_FIT */ 95 96 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE 97 # define IMAGE_BOOT_GET_CMDLINE 1 98 #else 99 # define IMAGE_BOOT_GET_CMDLINE 0 100 #endif 101 102 #ifdef CONFIG_OF_BOARD_SETUP 103 # define IMAGE_OF_BOARD_SETUP 1 104 #else 105 # define IMAGE_OF_BOARD_SETUP 0 106 #endif 107 108 #ifdef CONFIG_OF_SYSTEM_SETUP 109 # define IMAGE_OF_SYSTEM_SETUP 1 110 #else 111 # define IMAGE_OF_SYSTEM_SETUP 0 112 #endif 113 114 enum ih_category { 115 IH_ARCH, 116 IH_COMP, 117 IH_OS, 118 IH_TYPE, 119 120 IH_COUNT, 121 }; 122 123 /* 124 * Operating System Codes 125 * 126 * The following are exposed to uImage header. 127 * Do not change values for backward compatibility. 128 */ 129 enum { 130 IH_OS_INVALID = 0, /* Invalid OS */ 131 IH_OS_OPENBSD, /* OpenBSD */ 132 IH_OS_NETBSD, /* NetBSD */ 133 IH_OS_FREEBSD, /* FreeBSD */ 134 IH_OS_4_4BSD, /* 4.4BSD */ 135 IH_OS_LINUX, /* Linux */ 136 IH_OS_SVR4, /* SVR4 */ 137 IH_OS_ESIX, /* Esix */ 138 IH_OS_SOLARIS, /* Solaris */ 139 IH_OS_IRIX, /* Irix */ 140 IH_OS_SCO, /* SCO */ 141 IH_OS_DELL, /* Dell */ 142 IH_OS_NCR, /* NCR */ 143 IH_OS_LYNXOS, /* LynxOS */ 144 IH_OS_VXWORKS, /* VxWorks */ 145 IH_OS_PSOS, /* pSOS */ 146 IH_OS_QNX, /* QNX */ 147 IH_OS_U_BOOT, /* Firmware */ 148 IH_OS_RTEMS, /* RTEMS */ 149 IH_OS_ARTOS, /* ARTOS */ 150 IH_OS_UNITY, /* Unity OS */ 151 IH_OS_INTEGRITY, /* INTEGRITY */ 152 IH_OS_OSE, /* OSE */ 153 IH_OS_PLAN9, /* Plan 9 */ 154 IH_OS_OPENRTOS, /* OpenRTOS */ 155 IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */ 156 157 IH_OS_COUNT, 158 }; 159 160 /* 161 * CPU Architecture Codes (supported by Linux) 162 * 163 * The following are exposed to uImage header. 164 * Do not change values for backward compatibility. 165 */ 166 enum { 167 IH_ARCH_INVALID = 0, /* Invalid CPU */ 168 IH_ARCH_ALPHA, /* Alpha */ 169 IH_ARCH_ARM, /* ARM */ 170 IH_ARCH_I386, /* Intel x86 */ 171 IH_ARCH_IA64, /* IA64 */ 172 IH_ARCH_MIPS, /* MIPS */ 173 IH_ARCH_MIPS64, /* MIPS 64 Bit */ 174 IH_ARCH_PPC, /* PowerPC */ 175 IH_ARCH_S390, /* IBM S390 */ 176 IH_ARCH_SH, /* SuperH */ 177 IH_ARCH_SPARC, /* Sparc */ 178 IH_ARCH_SPARC64, /* Sparc 64 Bit */ 179 IH_ARCH_M68K, /* M68K */ 180 IH_ARCH_NIOS, /* Nios-32 */ 181 IH_ARCH_MICROBLAZE, /* MicroBlaze */ 182 IH_ARCH_NIOS2, /* Nios-II */ 183 IH_ARCH_BLACKFIN, /* Blackfin */ 184 IH_ARCH_AVR32, /* AVR32 */ 185 IH_ARCH_ST200, /* STMicroelectronics ST200 */ 186 IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */ 187 IH_ARCH_NDS32, /* ANDES Technology - NDS32 */ 188 IH_ARCH_OPENRISC, /* OpenRISC 1000 */ 189 IH_ARCH_ARM64, /* ARM64 */ 190 IH_ARCH_ARC, /* Synopsys DesignWare ARC */ 191 IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */ 192 IH_ARCH_XTENSA, /* Xtensa */ 193 IH_ARCH_RISCV, /* RISC-V */ 194 195 IH_ARCH_COUNT, 196 }; 197 198 /* 199 * Image Types 200 * 201 * "Standalone Programs" are directly runnable in the environment 202 * provided by U-Boot; it is expected that (if they behave 203 * well) you can continue to work in U-Boot after return from 204 * the Standalone Program. 205 * "OS Kernel Images" are usually images of some Embedded OS which 206 * will take over control completely. Usually these programs 207 * will install their own set of exception handlers, device 208 * drivers, set up the MMU, etc. - this means, that you cannot 209 * expect to re-enter U-Boot except by resetting the CPU. 210 * "RAMDisk Images" are more or less just data blocks, and their 211 * parameters (address, size) are passed to an OS kernel that is 212 * being started. 213 * "Multi-File Images" contain several images, typically an OS 214 * (Linux) kernel image and one or more data images like 215 * RAMDisks. This construct is useful for instance when you want 216 * to boot over the network using BOOTP etc., where the boot 217 * server provides just a single image file, but you want to get 218 * for instance an OS kernel and a RAMDisk image. 219 * 220 * "Multi-File Images" start with a list of image sizes, each 221 * image size (in bytes) specified by an "uint32_t" in network 222 * byte order. This list is terminated by an "(uint32_t)0". 223 * Immediately after the terminating 0 follow the images, one by 224 * one, all aligned on "uint32_t" boundaries (size rounded up to 225 * a multiple of 4 bytes - except for the last file). 226 * 227 * "Firmware Images" are binary images containing firmware (like 228 * U-Boot or FPGA images) which usually will be programmed to 229 * flash memory. 230 * 231 * "Script files" are command sequences that will be executed by 232 * U-Boot's command interpreter; this feature is especially 233 * useful when you configure U-Boot to use a real shell (hush) 234 * as command interpreter (=> Shell Scripts). 235 * 236 * The following are exposed to uImage header. 237 * Do not change values for backward compatibility. 238 */ 239 240 enum { 241 IH_TYPE_INVALID = 0, /* Invalid Image */ 242 IH_TYPE_STANDALONE, /* Standalone Program */ 243 IH_TYPE_KERNEL, /* OS Kernel Image */ 244 IH_TYPE_RAMDISK, /* RAMDisk Image */ 245 IH_TYPE_MULTI, /* Multi-File Image */ 246 IH_TYPE_FIRMWARE, /* Firmware Image */ 247 IH_TYPE_SCRIPT, /* Script file */ 248 IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */ 249 IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */ 250 IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */ 251 IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */ 252 IH_TYPE_UBLIMAGE, /* Davinci UBL Image */ 253 IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */ 254 IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */ 255 /* OS Kernel Image, can run from any load address */ 256 IH_TYPE_KERNEL_NOLOAD, 257 IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */ 258 IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */ 259 IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */ 260 IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */ 261 IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA Preloader */ 262 IH_TYPE_X86_SETUP, /* x86 setup.bin Image */ 263 IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */ 264 IH_TYPE_LOADABLE, /* A list of typeless images */ 265 IH_TYPE_RKIMAGE, /* Rockchip Boot Image */ 266 IH_TYPE_RKSD, /* Rockchip SD card */ 267 IH_TYPE_RKSPI, /* Rockchip SPI image */ 268 IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */ 269 IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */ 270 IH_TYPE_FPGA, /* FPGA Image */ 271 IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */ 272 IH_TYPE_TEE, /* Trusted Execution Environment OS Image */ 273 IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */ 274 IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */ 275 276 IH_TYPE_COUNT, /* Number of image types */ 277 }; 278 279 /* 280 * Compression Types 281 * 282 * The following are exposed to uImage header. 283 * Do not change values for backward compatibility. 284 */ 285 enum { 286 IH_COMP_NONE = 0, /* No Compression Used */ 287 IH_COMP_GZIP, /* gzip Compression Used */ 288 IH_COMP_BZIP2, /* bzip2 Compression Used */ 289 IH_COMP_LZMA, /* lzma Compression Used */ 290 IH_COMP_LZO, /* lzo Compression Used */ 291 IH_COMP_LZ4, /* lz4 Compression Used */ 292 293 IH_COMP_COUNT, 294 }; 295 296 #define IH_MAGIC 0x27051956 /* Image Magic Number */ 297 #define IH_NMLEN 32 /* Image Name Length */ 298 299 /* Reused from common.h */ 300 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1)) 301 302 /* 303 * Legacy format image header, 304 * all data in network byte order (aka natural aka bigendian). 305 */ 306 typedef struct image_header { 307 __be32 ih_magic; /* Image Header Magic Number */ 308 __be32 ih_hcrc; /* Image Header CRC Checksum */ 309 __be32 ih_time; /* Image Creation Timestamp */ 310 __be32 ih_size; /* Image Data Size */ 311 __be32 ih_load; /* Data Load Address */ 312 __be32 ih_ep; /* Entry Point Address */ 313 __be32 ih_dcrc; /* Image Data CRC Checksum */ 314 uint8_t ih_os; /* Operating System */ 315 uint8_t ih_arch; /* CPU architecture */ 316 uint8_t ih_type; /* Image Type */ 317 uint8_t ih_comp; /* Compression Type */ 318 uint8_t ih_name[IH_NMLEN]; /* Image Name */ 319 } image_header_t; 320 321 typedef struct image_info { 322 ulong start, end; /* start/end of blob */ 323 ulong image_start, image_len; /* start of image within blob, len of image */ 324 ulong load; /* load addr for the image */ 325 uint8_t comp, type, os; /* compression, type of image, os type */ 326 uint8_t arch; /* CPU architecture */ 327 } image_info_t; 328 329 /* 330 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>() 331 * routines. 332 */ 333 typedef struct bootm_headers { 334 /* 335 * Legacy os image header, if it is a multi component image 336 * then boot_get_ramdisk() and get_fdt() will attempt to get 337 * data from second and third component accordingly. 338 */ 339 image_header_t *legacy_hdr_os; /* image header pointer */ 340 image_header_t legacy_hdr_os_copy; /* header copy */ 341 ulong legacy_hdr_valid; 342 343 #if IMAGE_ENABLE_FIT 344 const char *fit_uname_cfg; /* configuration node unit name */ 345 346 void *fit_hdr_os; /* os FIT image header */ 347 const char *fit_uname_os; /* os subimage node unit name */ 348 int fit_noffset_os; /* os subimage node offset */ 349 350 void *fit_hdr_rd; /* init ramdisk FIT image header */ 351 const char *fit_uname_rd; /* init ramdisk subimage node unit name */ 352 int fit_noffset_rd; /* init ramdisk subimage node offset */ 353 354 void *fit_hdr_fdt; /* FDT blob FIT image header */ 355 const char *fit_uname_fdt; /* FDT blob subimage node unit name */ 356 int fit_noffset_fdt;/* FDT blob subimage node offset */ 357 358 void *fit_hdr_setup; /* x86 setup FIT image header */ 359 const char *fit_uname_setup; /* x86 setup subimage node name */ 360 int fit_noffset_setup;/* x86 setup subimage node offset */ 361 #endif 362 363 #ifndef USE_HOSTCC 364 image_info_t os; /* os image info */ 365 ulong ep; /* entry point of OS */ 366 367 ulong rd_start, rd_end;/* ramdisk start/end */ 368 369 char *ft_addr; /* flat dev tree address */ 370 ulong ft_len; /* length of flat device tree */ 371 372 ulong initrd_start; 373 ulong initrd_end; 374 ulong cmdline_start; 375 ulong cmdline_end; 376 bd_t *kbd; 377 #endif 378 379 int verify; /* env_get("verify")[0] != 'n' */ 380 381 #define BOOTM_STATE_START (0x00000001) 382 #define BOOTM_STATE_FINDOS (0x00000002) 383 #define BOOTM_STATE_FINDOTHER (0x00000004) 384 #define BOOTM_STATE_LOADOS (0x00000008) 385 #define BOOTM_STATE_RAMDISK (0x00000010) 386 #define BOOTM_STATE_FDT (0x00000020) 387 #define BOOTM_STATE_OS_CMDLINE (0x00000040) 388 #define BOOTM_STATE_OS_BD_T (0x00000080) 389 #define BOOTM_STATE_OS_PREP (0x00000100) 390 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */ 391 #define BOOTM_STATE_OS_GO (0x00000400) 392 int state; 393 394 #ifdef CONFIG_LMB 395 struct lmb lmb; /* for memory mgmt */ 396 #endif 397 } bootm_headers_t; 398 399 extern bootm_headers_t images; 400 401 /* 402 * Some systems (for example LWMON) have very short watchdog periods; 403 * we must make sure to split long operations like memmove() or 404 * checksum calculations into reasonable chunks. 405 */ 406 #ifndef CHUNKSZ 407 #define CHUNKSZ (64 * 1024) 408 #endif 409 410 #ifndef CHUNKSZ_CRC32 411 #define CHUNKSZ_CRC32 (64 * 1024) 412 #endif 413 414 #ifndef CHUNKSZ_MD5 415 #define CHUNKSZ_MD5 (64 * 1024) 416 #endif 417 418 #ifndef CHUNKSZ_SHA1 419 #define CHUNKSZ_SHA1 (64 * 1024) 420 #endif 421 422 #define uimage_to_cpu(x) be32_to_cpu(x) 423 #define cpu_to_uimage(x) cpu_to_be32(x) 424 425 /* 426 * Translation table for entries of a specific type; used by 427 * get_table_entry_id() and get_table_entry_name(). 428 */ 429 typedef struct table_entry { 430 int id; 431 char *sname; /* short (input) name to find table entry */ 432 char *lname; /* long (output) name to print for messages */ 433 } table_entry_t; 434 435 /* 436 * get_table_entry_id() scans the translation table trying to find an 437 * entry that matches the given short name. If a matching entry is 438 * found, it's id is returned to the caller. 439 */ 440 int get_table_entry_id(const table_entry_t *table, 441 const char *table_name, const char *name); 442 /* 443 * get_table_entry_name() scans the translation table trying to find 444 * an entry that matches the given id. If a matching entry is found, 445 * its long name is returned to the caller. 446 */ 447 char *get_table_entry_name(const table_entry_t *table, char *msg, int id); 448 449 const char *genimg_get_os_name(uint8_t os); 450 451 /** 452 * genimg_get_os_short_name() - get the short name for an OS 453 * 454 * @param os OS (IH_OS_...) 455 * @return OS short name, or "unknown" if unknown 456 */ 457 const char *genimg_get_os_short_name(uint8_t comp); 458 459 const char *genimg_get_arch_name(uint8_t arch); 460 461 /** 462 * genimg_get_arch_short_name() - get the short name for an architecture 463 * 464 * @param arch Architecture type (IH_ARCH_...) 465 * @return architecture short name, or "unknown" if unknown 466 */ 467 const char *genimg_get_arch_short_name(uint8_t arch); 468 469 const char *genimg_get_type_name(uint8_t type); 470 471 /** 472 * genimg_get_type_short_name() - get the short name for an image type 473 * 474 * @param type Image type (IH_TYPE_...) 475 * @return image short name, or "unknown" if unknown 476 */ 477 const char *genimg_get_type_short_name(uint8_t type); 478 479 const char *genimg_get_comp_name(uint8_t comp); 480 481 /** 482 * genimg_get_comp_short_name() - get the short name for a compression method 483 * 484 * @param comp compression method (IH_COMP_...) 485 * @return compression method short name, or "unknown" if unknown 486 */ 487 const char *genimg_get_comp_short_name(uint8_t comp); 488 489 /** 490 * genimg_get_cat_name() - Get the name of an item in a category 491 * 492 * @category: Category of item 493 * @id: Item ID 494 * @return name of item, or "Unknown ..." if unknown 495 */ 496 const char *genimg_get_cat_name(enum ih_category category, uint id); 497 498 /** 499 * genimg_get_cat_short_name() - Get the short name of an item in a category 500 * 501 * @category: Category of item 502 * @id: Item ID 503 * @return short name of item, or "Unknown ..." if unknown 504 */ 505 const char *genimg_get_cat_short_name(enum ih_category category, uint id); 506 507 /** 508 * genimg_get_cat_count() - Get the number of items in a category 509 * 510 * @category: Category to check 511 * @return the number of items in the category (IH_xxx_COUNT) 512 */ 513 int genimg_get_cat_count(enum ih_category category); 514 515 /** 516 * genimg_get_cat_desc() - Get the description of a category 517 * 518 * @return the description of a category, e.g. "architecture". This 519 * effectively converts the enum to a string. 520 */ 521 const char *genimg_get_cat_desc(enum ih_category category); 522 523 int genimg_get_os_id(const char *name); 524 int genimg_get_arch_id(const char *name); 525 int genimg_get_type_id(const char *name); 526 int genimg_get_comp_id(const char *name); 527 void genimg_print_size(uint32_t size); 528 529 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ 530 defined(USE_HOSTCC) 531 #define IMAGE_ENABLE_TIMESTAMP 1 532 #else 533 #define IMAGE_ENABLE_TIMESTAMP 0 534 #endif 535 void genimg_print_time(time_t timestamp); 536 537 /* What to do with a image load address ('load = <> 'in the FIT) */ 538 enum fit_load_op { 539 FIT_LOAD_IGNORED, /* Ignore load address */ 540 FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ 541 FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */ 542 FIT_LOAD_REQUIRED, /* Must be provided */ 543 }; 544 545 int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start, 546 ulong *setup_len); 547 548 #ifndef USE_HOSTCC 549 /* Image format types, returned by _get_format() routine */ 550 #define IMAGE_FORMAT_INVALID 0x00 551 #if defined(CONFIG_IMAGE_FORMAT_LEGACY) 552 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ 553 #endif 554 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ 555 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */ 556 557 ulong genimg_get_kernel_addr_fit(char * const img_addr, 558 const char **fit_uname_config, 559 const char **fit_uname_kernel); 560 ulong genimg_get_kernel_addr(char * const img_addr); 561 int genimg_get_format(const void *img_addr); 562 int genimg_has_config(bootm_headers_t *images); 563 564 int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images, 565 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 566 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, 567 uint8_t arch, ulong *rd_start, ulong *rd_end); 568 569 /** 570 * boot_get_loadable - routine to load a list of binaries to memory 571 * @argc: Ignored Argument 572 * @argv: Ignored Argument 573 * @images: pointer to the bootm images structure 574 * @arch: expected architecture for the image 575 * @ld_start: Ignored Argument 576 * @ld_len: Ignored Argument 577 * 578 * boot_get_loadable() will take the given FIT configuration, and look 579 * for a field named "loadables". Loadables, is a list of elements in 580 * the FIT given as strings. exe: 581 * loadables = "linux_kernel", "fdt-2"; 582 * this function will attempt to parse each string, and load the 583 * corresponding element from the FIT into memory. Once placed, 584 * no aditional actions are taken. 585 * 586 * @return: 587 * 0, if only valid images or no images are found 588 * error code, if an error occurs during fit_image_load 589 */ 590 int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, 591 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 592 #endif /* !USE_HOSTCC */ 593 594 int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, 595 ulong *setup_start, ulong *setup_len); 596 597 /** 598 * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays) 599 * 600 * This deals with all aspects of loading an DTB from a FIT. 601 * The correct base image based on configuration will be selected, and 602 * then any overlays specified will be applied (as present in fit_uname_configp). 603 * 604 * @param images Boot images structure 605 * @param addr Address of FIT in memory 606 * @param fit_unamep On entry this is the requested image name 607 * (e.g. "kernel") or NULL to use the default. On exit 608 * points to the selected image name 609 * @param fit_uname_configp On entry this is the requested configuration 610 * name (e.g. "conf-1") or NULL to use the default. On 611 * exit points to the selected configuration name. 612 * @param arch Expected architecture (IH_ARCH_...) 613 * @param datap Returns address of loaded image 614 * @param lenp Returns length of loaded image 615 * 616 * @return node offset of base image, or -ve error code on error 617 */ 618 int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, 619 const char **fit_unamep, const char **fit_uname_configp, 620 int arch, ulong *datap, ulong *lenp); 621 622 /** 623 * fit_image_load() - load an image from a FIT 624 * 625 * This deals with all aspects of loading an image from a FIT, including 626 * selecting the right image based on configuration, verifying it, printing 627 * out progress messages, checking the type/arch/os and optionally copying it 628 * to the right load address. 629 * 630 * The property to look up is defined by image_type. 631 * 632 * @param images Boot images structure 633 * @param addr Address of FIT in memory 634 * @param fit_unamep On entry this is the requested image name 635 * (e.g. "kernel") or NULL to use the default. On exit 636 * points to the selected image name 637 * @param fit_uname_configp On entry this is the requested configuration 638 * name (e.g. "conf-1") or NULL to use the default. On 639 * exit points to the selected configuration name. 640 * @param arch Expected architecture (IH_ARCH_...) 641 * @param image_type Required image type (IH_TYPE_...). If this is 642 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD 643 * also. 644 * @param bootstage_id ID of starting bootstage to use for progress updates. 645 * This will be added to the BOOTSTAGE_SUB values when 646 * calling bootstage_mark() 647 * @param load_op Decribes what to do with the load address 648 * @param datap Returns address of loaded image 649 * @param lenp Returns length of loaded image 650 * @return node offset of image, or -ve error code on error 651 */ 652 int fit_image_load(bootm_headers_t *images, ulong addr, 653 const char **fit_unamep, const char **fit_uname_configp, 654 int arch, int image_type, int bootstage_id, 655 enum fit_load_op load_op, ulong *datap, ulong *lenp); 656 657 #ifndef USE_HOSTCC 658 /** 659 * fit_get_node_from_config() - Look up an image a FIT by type 660 * 661 * This looks in the selected conf- node (images->fit_uname_cfg) for a 662 * particular image type (e.g. "kernel") and then finds the image that is 663 * referred to. 664 * 665 * For example, for something like: 666 * 667 * images { 668 * kernel { 669 * ... 670 * }; 671 * }; 672 * configurations { 673 * conf-1 { 674 * kernel = "kernel"; 675 * }; 676 * }; 677 * 678 * the function will return the node offset of the kernel@1 node, assuming 679 * that conf-1 is the chosen configuration. 680 * 681 * @param images Boot images structure 682 * @param prop_name Property name to look up (FIT_..._PROP) 683 * @param addr Address of FIT in memory 684 */ 685 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, 686 ulong addr); 687 688 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, 689 bootm_headers_t *images, 690 char **of_flat_tree, ulong *of_size); 691 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); 692 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); 693 694 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, 695 ulong *initrd_start, ulong *initrd_end); 696 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); 697 #ifdef CONFIG_SYS_BOOT_GET_KBD 698 int boot_get_kbd(struct lmb *lmb, bd_t **kbd); 699 #endif /* CONFIG_SYS_BOOT_GET_KBD */ 700 #endif /* !USE_HOSTCC */ 701 702 /*******************************************************************/ 703 /* Legacy format specific code (prefixed with image_) */ 704 /*******************************************************************/ 705 static inline uint32_t image_get_header_size(void) 706 { 707 return (sizeof(image_header_t)); 708 } 709 710 #define image_get_hdr_l(f) \ 711 static inline uint32_t image_get_##f(const image_header_t *hdr) \ 712 { \ 713 return uimage_to_cpu(hdr->ih_##f); \ 714 } 715 image_get_hdr_l(magic) /* image_get_magic */ 716 image_get_hdr_l(hcrc) /* image_get_hcrc */ 717 image_get_hdr_l(time) /* image_get_time */ 718 image_get_hdr_l(size) /* image_get_size */ 719 image_get_hdr_l(load) /* image_get_load */ 720 image_get_hdr_l(ep) /* image_get_ep */ 721 image_get_hdr_l(dcrc) /* image_get_dcrc */ 722 723 #define image_get_hdr_b(f) \ 724 static inline uint8_t image_get_##f(const image_header_t *hdr) \ 725 { \ 726 return hdr->ih_##f; \ 727 } 728 image_get_hdr_b(os) /* image_get_os */ 729 image_get_hdr_b(arch) /* image_get_arch */ 730 image_get_hdr_b(type) /* image_get_type */ 731 image_get_hdr_b(comp) /* image_get_comp */ 732 733 static inline char *image_get_name(const image_header_t *hdr) 734 { 735 return (char *)hdr->ih_name; 736 } 737 738 static inline uint32_t image_get_data_size(const image_header_t *hdr) 739 { 740 return image_get_size(hdr); 741 } 742 743 /** 744 * image_get_data - get image payload start address 745 * @hdr: image header 746 * 747 * image_get_data() returns address of the image payload. For single 748 * component images it is image data start. For multi component 749 * images it points to the null terminated table of sub-images sizes. 750 * 751 * returns: 752 * image payload data start address 753 */ 754 static inline ulong image_get_data(const image_header_t *hdr) 755 { 756 return ((ulong)hdr + image_get_header_size()); 757 } 758 759 static inline uint32_t image_get_image_size(const image_header_t *hdr) 760 { 761 return (image_get_size(hdr) + image_get_header_size()); 762 } 763 static inline ulong image_get_image_end(const image_header_t *hdr) 764 { 765 return ((ulong)hdr + image_get_image_size(hdr)); 766 } 767 768 #define image_set_hdr_l(f) \ 769 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \ 770 { \ 771 hdr->ih_##f = cpu_to_uimage(val); \ 772 } 773 image_set_hdr_l(magic) /* image_set_magic */ 774 image_set_hdr_l(hcrc) /* image_set_hcrc */ 775 image_set_hdr_l(time) /* image_set_time */ 776 image_set_hdr_l(size) /* image_set_size */ 777 image_set_hdr_l(load) /* image_set_load */ 778 image_set_hdr_l(ep) /* image_set_ep */ 779 image_set_hdr_l(dcrc) /* image_set_dcrc */ 780 781 #define image_set_hdr_b(f) \ 782 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \ 783 { \ 784 hdr->ih_##f = val; \ 785 } 786 image_set_hdr_b(os) /* image_set_os */ 787 image_set_hdr_b(arch) /* image_set_arch */ 788 image_set_hdr_b(type) /* image_set_type */ 789 image_set_hdr_b(comp) /* image_set_comp */ 790 791 static inline void image_set_name(image_header_t *hdr, const char *name) 792 { 793 strncpy(image_get_name(hdr), name, IH_NMLEN); 794 } 795 796 int image_check_hcrc(const image_header_t *hdr); 797 int image_check_dcrc(const image_header_t *hdr); 798 #ifndef USE_HOSTCC 799 ulong env_get_bootm_low(void); 800 phys_size_t env_get_bootm_size(void); 801 phys_size_t env_get_bootm_mapsize(void); 802 #endif 803 void memmove_wd(void *to, void *from, size_t len, ulong chunksz); 804 805 static inline int image_check_magic(const image_header_t *hdr) 806 { 807 return (image_get_magic(hdr) == IH_MAGIC); 808 } 809 static inline int image_check_type(const image_header_t *hdr, uint8_t type) 810 { 811 return (image_get_type(hdr) == type); 812 } 813 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch) 814 { 815 return (image_get_arch(hdr) == arch) || 816 (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64); 817 } 818 static inline int image_check_os(const image_header_t *hdr, uint8_t os) 819 { 820 return (image_get_os(hdr) == os); 821 } 822 823 ulong image_multi_count(const image_header_t *hdr); 824 void image_multi_getimg(const image_header_t *hdr, ulong idx, 825 ulong *data, ulong *len); 826 827 void image_print_contents(const void *hdr); 828 829 #ifndef USE_HOSTCC 830 static inline int image_check_target_arch(const image_header_t *hdr) 831 { 832 #ifndef IH_ARCH_DEFAULT 833 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" 834 #endif 835 return image_check_arch(hdr, IH_ARCH_DEFAULT); 836 } 837 #endif /* USE_HOSTCC */ 838 839 /** 840 * Set up properties in the FDT 841 * 842 * This sets up properties in the FDT that is to be passed to linux. 843 * 844 * @images: Images information 845 * @blob: FDT to update 846 * @of_size: Size of the FDT 847 * @lmb: Points to logical memory block structure 848 * @return 0 if ok, <0 on failure 849 */ 850 int image_setup_libfdt(bootm_headers_t *images, void *blob, 851 int of_size, struct lmb *lmb); 852 853 /** 854 * Set up the FDT to use for booting a kernel 855 * 856 * This performs ramdisk setup, sets up the FDT if required, and adds 857 * paramters to the FDT if libfdt is available. 858 * 859 * @param images Images information 860 * @return 0 if ok, <0 on failure 861 */ 862 int image_setup_linux(bootm_headers_t *images); 863 864 /** 865 * bootz_setup() - Extract stat and size of a Linux xImage 866 * 867 * @image: Address of image 868 * @start: Returns start address of image 869 * @end : Returns end address of image 870 * @return 0 if OK, 1 if the image was not recognised 871 */ 872 int bootz_setup(ulong image, ulong *start, ulong *end); 873 874 875 /*******************************************************************/ 876 /* New uImage format specific code (prefixed with fit_) */ 877 /*******************************************************************/ 878 879 #define FIT_IMAGES_PATH "/images" 880 #define FIT_CONFS_PATH "/configurations" 881 882 /* hash/signature node */ 883 #define FIT_HASH_NODENAME "hash" 884 #define FIT_ALGO_PROP "algo" 885 #define FIT_VALUE_PROP "value" 886 #define FIT_IGNORE_PROP "uboot-ignore" 887 #define FIT_SIG_NODENAME "signature" 888 889 /* image node */ 890 #define FIT_DATA_PROP "data" 891 #define FIT_DATA_POSITION_PROP "data-position" 892 #define FIT_DATA_OFFSET_PROP "data-offset" 893 #define FIT_DATA_SIZE_PROP "data-size" 894 #define FIT_TIMESTAMP_PROP "timestamp" 895 #define FIT_DESC_PROP "description" 896 #define FIT_ARCH_PROP "arch" 897 #define FIT_TYPE_PROP "type" 898 #define FIT_OS_PROP "os" 899 #define FIT_COMP_PROP "compression" 900 #define FIT_ENTRY_PROP "entry" 901 #define FIT_LOAD_PROP "load" 902 903 /* configuration node */ 904 #define FIT_KERNEL_PROP "kernel" 905 #define FIT_RAMDISK_PROP "ramdisk" 906 #define FIT_FDT_PROP "fdt" 907 #define FIT_LOADABLE_PROP "loadables" 908 #define FIT_DEFAULT_PROP "default" 909 #define FIT_SETUP_PROP "setup" 910 #define FIT_FPGA_PROP "fpga" 911 912 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE 913 914 #if IMAGE_ENABLE_FIT 915 /* cmdline argument format parsing */ 916 int fit_parse_conf(const char *spec, ulong addr_curr, 917 ulong *addr, const char **conf_name); 918 int fit_parse_subimage(const char *spec, ulong addr_curr, 919 ulong *addr, const char **image_name); 920 921 int fit_get_subimage_count(const void *fit, int images_noffset); 922 void fit_print_contents(const void *fit); 923 void fit_image_print(const void *fit, int noffset, const char *p); 924 925 /** 926 * fit_get_end - get FIT image size 927 * @fit: pointer to the FIT format image header 928 * 929 * returns: 930 * size of the FIT image (blob) in memory 931 */ 932 static inline ulong fit_get_size(const void *fit) 933 { 934 return fdt_totalsize(fit); 935 } 936 937 /** 938 * fit_get_end - get FIT image end 939 * @fit: pointer to the FIT format image header 940 * 941 * returns: 942 * end address of the FIT image (blob) in memory 943 */ 944 ulong fit_get_end(const void *fit); 945 946 /** 947 * fit_get_name - get FIT node name 948 * @fit: pointer to the FIT format image header 949 * 950 * returns: 951 * NULL, on error 952 * pointer to node name, on success 953 */ 954 static inline const char *fit_get_name(const void *fit_hdr, 955 int noffset, int *len) 956 { 957 return fdt_get_name(fit_hdr, noffset, len); 958 } 959 960 int fit_get_desc(const void *fit, int noffset, char **desc); 961 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp); 962 963 int fit_image_get_node(const void *fit, const char *image_uname); 964 int fit_image_get_os(const void *fit, int noffset, uint8_t *os); 965 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch); 966 int fit_image_get_type(const void *fit, int noffset, uint8_t *type); 967 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp); 968 int fit_image_get_load(const void *fit, int noffset, ulong *load); 969 int fit_image_get_entry(const void *fit, int noffset, ulong *entry); 970 int fit_image_get_data(const void *fit, int noffset, 971 const void **data, size_t *size); 972 int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset); 973 int fit_image_get_data_position(const void *fit, int noffset, 974 int *data_position); 975 int fit_image_get_data_size(const void *fit, int noffset, int *data_size); 976 977 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); 978 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, 979 int *value_len); 980 981 int fit_set_timestamp(void *fit, int noffset, time_t timestamp); 982 983 /** 984 * fit_add_verification_data() - add verification data to FIT image nodes 985 * 986 * @keydir: Directory containing keys 987 * @kwydest: FDT blob to write public key information to 988 * @fit: Pointer to the FIT format image header 989 * @comment: Comment to add to signature nodes 990 * @require_keys: Mark all keys as 'required' 991 * @engine_id: Engine to use for signing 992 * 993 * Adds hash values for all component images in the FIT blob. 994 * Hashes are calculated for all component images which have hash subnodes 995 * with algorithm property set to one of the supported hash algorithms. 996 * 997 * Also add signatures if signature nodes are present. 998 * 999 * returns 1000 * 0, on success 1001 * libfdt error code, on failure 1002 */ 1003 int fit_add_verification_data(const char *keydir, void *keydest, void *fit, 1004 const char *comment, int require_keys, 1005 const char *engine_id); 1006 1007 int fit_image_verify(const void *fit, int noffset); 1008 int fit_config_verify(const void *fit, int conf_noffset); 1009 int fit_all_image_verify(const void *fit); 1010 int fit_image_check_os(const void *fit, int noffset, uint8_t os); 1011 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); 1012 int fit_image_check_type(const void *fit, int noffset, uint8_t type); 1013 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp); 1014 int fit_check_format(const void *fit); 1015 1016 int fit_conf_find_compat(const void *fit, const void *fdt); 1017 int fit_conf_get_node(const void *fit, const char *conf_uname); 1018 1019 /** 1020 * fit_conf_get_prop_node() - Get node refered to by a configuration 1021 * @fit: FIT to check 1022 * @noffset: Offset of conf@xxx node to check 1023 * @prop_name: Property to read from the conf node 1024 * 1025 * The conf- nodes contain references to other nodes, using properties 1026 * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"), 1027 * return the offset of the node referred to (e.g. offset of node 1028 * "/images/kernel". 1029 */ 1030 int fit_conf_get_prop_node(const void *fit, int noffset, 1031 const char *prop_name); 1032 1033 void fit_conf_print(const void *fit, int noffset, const char *p); 1034 1035 int fit_check_ramdisk(const void *fit, int os_noffset, 1036 uint8_t arch, int verify); 1037 1038 int calculate_hash(const void *data, int data_len, const char *algo, 1039 uint8_t *value, int *value_len); 1040 1041 /* 1042 * At present we only support signing on the host, and verification on the 1043 * device 1044 */ 1045 #if defined(CONFIG_FIT_SIGNATURE) 1046 # ifdef USE_HOSTCC 1047 # define IMAGE_ENABLE_SIGN 1 1048 # define IMAGE_ENABLE_VERIFY 1 1049 # include <openssl/evp.h> 1050 #else 1051 # define IMAGE_ENABLE_SIGN 0 1052 # define IMAGE_ENABLE_VERIFY 1 1053 # endif 1054 #else 1055 # define IMAGE_ENABLE_SIGN 0 1056 # define IMAGE_ENABLE_VERIFY 0 1057 #endif 1058 1059 #ifdef USE_HOSTCC 1060 void *image_get_host_blob(void); 1061 void image_set_host_blob(void *host_blob); 1062 # define gd_fdt_blob() image_get_host_blob() 1063 #else 1064 # define gd_fdt_blob() (gd->fdt_blob) 1065 #endif 1066 1067 #ifdef CONFIG_FIT_BEST_MATCH 1068 #define IMAGE_ENABLE_BEST_MATCH 1 1069 #else 1070 #define IMAGE_ENABLE_BEST_MATCH 0 1071 #endif 1072 1073 /* Information passed to the signing routines */ 1074 struct image_sign_info { 1075 const char *keydir; /* Directory conaining keys */ 1076 const char *keyname; /* Name of key to use */ 1077 void *fit; /* Pointer to FIT blob */ 1078 int node_offset; /* Offset of signature node */ 1079 const char *name; /* Algorithm name */ 1080 struct checksum_algo *checksum; /* Checksum algorithm information */ 1081 struct crypto_algo *crypto; /* Crypto algorithm information */ 1082 const void *fdt_blob; /* FDT containing public keys */ 1083 int required_keynode; /* Node offset of key to use: -1=any */ 1084 const char *require_keys; /* Value for 'required' property */ 1085 const char *engine_id; /* Engine to use for signing */ 1086 }; 1087 #endif /* Allow struct image_region to always be defined for rsa.h */ 1088 1089 /* A part of an image, used for hashing */ 1090 struct image_region { 1091 const void *data; 1092 int size; 1093 }; 1094 1095 #if IMAGE_ENABLE_FIT 1096 1097 #if IMAGE_ENABLE_VERIFY 1098 # include <u-boot/rsa-checksum.h> 1099 #endif 1100 struct checksum_algo { 1101 const char *name; 1102 const int checksum_len; 1103 const int der_len; 1104 const uint8_t *der_prefix; 1105 #if IMAGE_ENABLE_SIGN 1106 const EVP_MD *(*calculate_sign)(void); 1107 #endif 1108 int (*calculate)(const char *name, 1109 const struct image_region region[], 1110 int region_count, uint8_t *checksum); 1111 }; 1112 1113 struct crypto_algo { 1114 const char *name; /* Name of algorithm */ 1115 const int key_len; 1116 1117 /** 1118 * sign() - calculate and return signature for given input data 1119 * 1120 * @info: Specifies key and FIT information 1121 * @data: Pointer to the input data 1122 * @data_len: Data length 1123 * @sigp: Set to an allocated buffer holding the signature 1124 * @sig_len: Set to length of the calculated hash 1125 * 1126 * This computes input data signature according to selected algorithm. 1127 * Resulting signature value is placed in an allocated buffer, the 1128 * pointer is returned as *sigp. The length of the calculated 1129 * signature is returned via the sig_len pointer argument. The caller 1130 * should free *sigp. 1131 * 1132 * @return: 0, on success, -ve on error 1133 */ 1134 int (*sign)(struct image_sign_info *info, 1135 const struct image_region region[], 1136 int region_count, uint8_t **sigp, uint *sig_len); 1137 1138 /** 1139 * add_verify_data() - Add verification information to FDT 1140 * 1141 * Add public key information to the FDT node, suitable for 1142 * verification at run-time. The information added depends on the 1143 * algorithm being used. 1144 * 1145 * @info: Specifies key and FIT information 1146 * @keydest: Destination FDT blob for public key data 1147 * @return: 0, on success, -ve on error 1148 */ 1149 int (*add_verify_data)(struct image_sign_info *info, void *keydest); 1150 1151 /** 1152 * verify() - Verify a signature against some data 1153 * 1154 * @info: Specifies key and FIT information 1155 * @data: Pointer to the input data 1156 * @data_len: Data length 1157 * @sig: Signature 1158 * @sig_len: Number of bytes in signature 1159 * @return 0 if verified, -ve on error 1160 */ 1161 int (*verify)(struct image_sign_info *info, 1162 const struct image_region region[], int region_count, 1163 uint8_t *sig, uint sig_len); 1164 }; 1165 1166 /** 1167 * image_get_checksum_algo() - Look up a checksum algorithm 1168 * 1169 * @param full_name Name of algorithm in the form "checksum,crypto" 1170 * @return pointer to algorithm information, or NULL if not found 1171 */ 1172 struct checksum_algo *image_get_checksum_algo(const char *full_name); 1173 1174 /** 1175 * image_get_crypto_algo() - Look up a cryptosystem algorithm 1176 * 1177 * @param full_name Name of algorithm in the form "checksum,crypto" 1178 * @return pointer to algorithm information, or NULL if not found 1179 */ 1180 struct crypto_algo *image_get_crypto_algo(const char *full_name); 1181 1182 /** 1183 * fit_image_verify_required_sigs() - Verify signatures marked as 'required' 1184 * 1185 * @fit: FIT to check 1186 * @image_noffset: Offset of image node to check 1187 * @data: Image data to check 1188 * @size: Size of image data 1189 * @sig_blob: FDT containing public keys 1190 * @no_sigsp: Returns 1 if no signatures were required, and 1191 * therefore nothing was checked. The caller may wish 1192 * to fall back to other mechanisms, or refuse to 1193 * boot. 1194 * @return 0 if all verified ok, <0 on error 1195 */ 1196 int fit_image_verify_required_sigs(const void *fit, int image_noffset, 1197 const char *data, size_t size, const void *sig_blob, 1198 int *no_sigsp); 1199 1200 /** 1201 * fit_image_check_sig() - Check a single image signature node 1202 * 1203 * @fit: FIT to check 1204 * @noffset: Offset of signature node to check 1205 * @data: Image data to check 1206 * @size: Size of image data 1207 * @required_keynode: Offset in the control FDT of the required key node, 1208 * if any. If this is given, then the image wil not 1209 * pass verification unless that key is used. If this is 1210 * -1 then any signature will do. 1211 * @err_msgp: In the event of an error, this will be pointed to a 1212 * help error string to display to the user. 1213 * @return 0 if all verified ok, <0 on error 1214 */ 1215 int fit_image_check_sig(const void *fit, int noffset, const void *data, 1216 size_t size, int required_keynode, char **err_msgp); 1217 1218 /** 1219 * fit_region_make_list() - Make a list of regions to hash 1220 * 1221 * Given a list of FIT regions (offset, size) provided by libfdt, create 1222 * a list of regions (void *, size) for use by the signature creationg 1223 * and verification code. 1224 * 1225 * @fit: FIT image to process 1226 * @fdt_regions: Regions as returned by libfdt 1227 * @count: Number of regions returned by libfdt 1228 * @region: Place to put list of regions (NULL to allocate it) 1229 * @return pointer to list of regions, or NULL if out of memory 1230 */ 1231 struct image_region *fit_region_make_list(const void *fit, 1232 struct fdt_region *fdt_regions, int count, 1233 struct image_region *region); 1234 1235 static inline int fit_image_check_target_arch(const void *fdt, int node) 1236 { 1237 #ifndef USE_HOSTCC 1238 return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); 1239 #else 1240 return 0; 1241 #endif 1242 } 1243 1244 #ifdef CONFIG_FIT_VERBOSE 1245 #define fit_unsupported(msg) printf("! %s:%d " \ 1246 "FIT images not supported for '%s'\n", \ 1247 __FILE__, __LINE__, (msg)) 1248 1249 #define fit_unsupported_reset(msg) printf("! %s:%d " \ 1250 "FIT images not supported for '%s' " \ 1251 "- must reset board to recover!\n", \ 1252 __FILE__, __LINE__, (msg)) 1253 #else 1254 #define fit_unsupported(msg) 1255 #define fit_unsupported_reset(msg) 1256 #endif /* CONFIG_FIT_VERBOSE */ 1257 #endif /* CONFIG_FIT */ 1258 1259 #if defined(CONFIG_ANDROID_BOOT_IMAGE) 1260 struct andr_img_hdr; 1261 int android_image_check_header(const struct andr_img_hdr *hdr); 1262 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, 1263 ulong *os_data, ulong *os_len); 1264 int android_image_get_ramdisk(const struct andr_img_hdr *hdr, 1265 ulong *rd_data, ulong *rd_len); 1266 ulong android_image_get_end(const struct andr_img_hdr *hdr); 1267 ulong android_image_get_kload(const struct andr_img_hdr *hdr); 1268 void android_print_contents(const struct andr_img_hdr *hdr); 1269 1270 #endif /* CONFIG_ANDROID_BOOT_IMAGE */ 1271 1272 /** 1273 * board_fit_config_name_match() - Check for a matching board name 1274 * 1275 * This is used when SPL loads a FIT containing multiple device tree files 1276 * and wants to work out which one to use. The description of each one is 1277 * passed to this function. The description comes from the 'description' field 1278 * in each (FDT) image node. 1279 * 1280 * @name: Device tree description 1281 * @return 0 if this device tree should be used, non-zero to try the next 1282 */ 1283 int board_fit_config_name_match(const char *name); 1284 1285 #if defined(CONFIG_SPL_FIT_IMAGE_POST_PROCESS) || \ 1286 defined(CONFIG_FIT_IMAGE_POST_PROCESS) 1287 /** 1288 * board_fit_image_post_process() - Do any post-process on FIT binary data 1289 * 1290 * This is used to do any sort of image manipulation, verification, decryption 1291 * etc. in a platform or board specific way. Obviously, anything done here would 1292 * need to be comprehended in how the images were prepared before being injected 1293 * into the FIT creation (i.e. the binary blobs would have been pre-processed 1294 * before being added to the FIT image). 1295 * 1296 * @image: pointer to the image start pointer 1297 * @size: pointer to the image size 1298 * @return no return value (failure should be handled internally) 1299 */ 1300 void board_fit_image_post_process(void **p_image, size_t *p_size); 1301 #endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */ 1302 1303 #define FDT_ERROR ((ulong)(-1)) 1304 1305 ulong fdt_getprop_u32(const void *fdt, int node, const char *prop); 1306 1307 /** 1308 * fit_find_config_node() - Find the node for the best DTB in a FIT image 1309 * 1310 * A FIT image contains one or more DTBs. This function parses the 1311 * configurations described in the FIT images and returns the node of 1312 * the first matching DTB. To check if a DTB matches a board, this function 1313 * calls board_fit_config_name_match(). If no matching DTB is found, it returns 1314 * the node described by the default configuration if it exists. 1315 * 1316 * @fdt: pointer to flat device tree 1317 * @return the node if found, -ve otherwise 1318 */ 1319 int fit_find_config_node(const void *fdt); 1320 1321 /** 1322 * Mapping of image types to function handlers to be invoked on the associated 1323 * loaded images 1324 * 1325 * @type: Type of image, I.E. IH_TYPE_* 1326 * @handler: Function to call on loaded image 1327 */ 1328 struct fit_loadable_tbl { 1329 int type; 1330 /** 1331 * handler() - Process a loaded image 1332 * 1333 * @data: Pointer to start of loaded image data 1334 * @size: Size of loaded image data 1335 */ 1336 void (*handler)(ulong data, size_t size); 1337 }; 1338 1339 /* 1340 * Define a FIT loadable image type handler 1341 * 1342 * _type is a valid uimage_type ID as defined in the "Image Type" enum above 1343 * _handler is the handler function to call after this image type is loaded 1344 */ 1345 #define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \ 1346 ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \ 1347 .type = _type, \ 1348 .handler = _handler, \ 1349 } 1350 1351 #endif /* __IMAGE_H__ */ 1352