xref: /openbmc/u-boot/include/image.h (revision c4f80f50)
1 /*
2  * (C) Copyright 2008 Semihalf
3  *
4  * (C) Copyright 2000-2005
5  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  ********************************************************************
9  * NOTE: This header file defines an interface to U-Boot. Including
10  * this (unmodified) header file in another file is considered normal
11  * use of U-Boot, and does *not* fall under the heading of "derived
12  * work".
13  ********************************************************************
14  */
15 
16 #ifndef __IMAGE_H__
17 #define __IMAGE_H__
18 
19 #include "compiler.h"
20 #include <asm/byteorder.h>
21 
22 /* Define this to avoid #ifdefs later on */
23 struct lmb;
24 
25 #ifdef USE_HOSTCC
26 
27 /* new uImage format support enabled on host */
28 #define CONFIG_FIT		1
29 #define CONFIG_OF_LIBFDT	1
30 #define CONFIG_FIT_VERBOSE	1 /* enable fit_format_{error,warning}() */
31 
32 #define IMAGE_ENABLE_IGNORE	0
33 #define IMAGE_INDENT_STRING	""
34 
35 #else
36 
37 #include <lmb.h>
38 #include <asm/u-boot.h>
39 #include <command.h>
40 
41 /* Take notice of the 'ignore' property for hashes */
42 #define IMAGE_ENABLE_IGNORE	1
43 #define IMAGE_INDENT_STRING	"   "
44 
45 #endif /* USE_HOSTCC */
46 
47 #if defined(CONFIG_FIT)
48 #include <hash.h>
49 #include <libfdt.h>
50 #include <fdt_support.h>
51 # ifdef CONFIG_SPL_BUILD
52 #  ifdef CONFIG_SPL_CRC32_SUPPORT
53 #   define IMAGE_ENABLE_CRC32	1
54 #  endif
55 #  ifdef CONFIG_SPL_MD5_SUPPORT
56 #   define IMAGE_ENABLE_MD5	1
57 #  endif
58 #  ifdef CONFIG_SPL_SHA1_SUPPORT
59 #   define IMAGE_ENABLE_SHA1	1
60 #  endif
61 #  ifdef CONFIG_SPL_SHA256_SUPPORT
62 #   define IMAGE_ENABLE_SHA256	1
63 #  endif
64 # else
65 #  define CONFIG_CRC32		/* FIT images need CRC32 support */
66 #  define CONFIG_MD5		/* and MD5 */
67 #  define CONFIG_SHA1		/* and SHA1 */
68 #  define CONFIG_SHA256		/* and SHA256 */
69 #  define IMAGE_ENABLE_CRC32	1
70 #  define IMAGE_ENABLE_MD5	1
71 #  define IMAGE_ENABLE_SHA1	1
72 #  define IMAGE_ENABLE_SHA256	1
73 # endif
74 
75 #ifndef IMAGE_ENABLE_CRC32
76 #define IMAGE_ENABLE_CRC32	0
77 #endif
78 
79 #ifndef IMAGE_ENABLE_MD5
80 #define IMAGE_ENABLE_MD5	0
81 #endif
82 
83 #ifndef IMAGE_ENABLE_SHA1
84 #define IMAGE_ENABLE_SHA1	0
85 #endif
86 
87 #ifndef IMAGE_ENABLE_SHA256
88 #define IMAGE_ENABLE_SHA256	0
89 #endif
90 
91 #endif /* CONFIG_FIT */
92 
93 #ifdef CONFIG_SYS_BOOT_RAMDISK_HIGH
94 # define IMAGE_ENABLE_RAMDISK_HIGH	1
95 #else
96 # define IMAGE_ENABLE_RAMDISK_HIGH	0
97 #endif
98 
99 #ifdef CONFIG_OF_LIBFDT
100 # define IMAGE_ENABLE_OF_LIBFDT	1
101 #else
102 # define IMAGE_ENABLE_OF_LIBFDT	0
103 #endif
104 
105 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE
106 # define IMAGE_BOOT_GET_CMDLINE		1
107 #else
108 # define IMAGE_BOOT_GET_CMDLINE		0
109 #endif
110 
111 #ifdef CONFIG_OF_BOARD_SETUP
112 # define IMAGE_OF_BOARD_SETUP		1
113 #else
114 # define IMAGE_OF_BOARD_SETUP		0
115 #endif
116 
117 /*
118  * Operating System Codes
119  */
120 #define IH_OS_INVALID		0	/* Invalid OS	*/
121 #define IH_OS_OPENBSD		1	/* OpenBSD	*/
122 #define IH_OS_NETBSD		2	/* NetBSD	*/
123 #define IH_OS_FREEBSD		3	/* FreeBSD	*/
124 #define IH_OS_4_4BSD		4	/* 4.4BSD	*/
125 #define IH_OS_LINUX		5	/* Linux	*/
126 #define IH_OS_SVR4		6	/* SVR4		*/
127 #define IH_OS_ESIX		7	/* Esix		*/
128 #define IH_OS_SOLARIS		8	/* Solaris	*/
129 #define IH_OS_IRIX		9	/* Irix		*/
130 #define IH_OS_SCO		10	/* SCO		*/
131 #define IH_OS_DELL		11	/* Dell		*/
132 #define IH_OS_NCR		12	/* NCR		*/
133 #define IH_OS_LYNXOS		13	/* LynxOS	*/
134 #define IH_OS_VXWORKS		14	/* VxWorks	*/
135 #define IH_OS_PSOS		15	/* pSOS		*/
136 #define IH_OS_QNX		16	/* QNX		*/
137 #define IH_OS_U_BOOT		17	/* Firmware	*/
138 #define IH_OS_RTEMS		18	/* RTEMS	*/
139 #define IH_OS_ARTOS		19	/* ARTOS	*/
140 #define IH_OS_UNITY		20	/* Unity OS	*/
141 #define IH_OS_INTEGRITY		21	/* INTEGRITY	*/
142 #define IH_OS_OSE		22	/* OSE		*/
143 #define IH_OS_PLAN9		23	/* Plan 9	*/
144 
145 /*
146  * CPU Architecture Codes (supported by Linux)
147  */
148 #define IH_ARCH_INVALID		0	/* Invalid CPU	*/
149 #define IH_ARCH_ALPHA		1	/* Alpha	*/
150 #define IH_ARCH_ARM		2	/* ARM		*/
151 #define IH_ARCH_I386		3	/* Intel x86	*/
152 #define IH_ARCH_IA64		4	/* IA64		*/
153 #define IH_ARCH_MIPS		5	/* MIPS		*/
154 #define IH_ARCH_MIPS64		6	/* MIPS	 64 Bit */
155 #define IH_ARCH_PPC		7	/* PowerPC	*/
156 #define IH_ARCH_S390		8	/* IBM S390	*/
157 #define IH_ARCH_SH		9	/* SuperH	*/
158 #define IH_ARCH_SPARC		10	/* Sparc	*/
159 #define IH_ARCH_SPARC64		11	/* Sparc 64 Bit */
160 #define IH_ARCH_M68K		12	/* M68K		*/
161 #define IH_ARCH_MICROBLAZE	14	/* MicroBlaze   */
162 #define IH_ARCH_NIOS2		15	/* Nios-II	*/
163 #define IH_ARCH_BLACKFIN	16	/* Blackfin	*/
164 #define IH_ARCH_AVR32		17	/* AVR32	*/
165 #define IH_ARCH_ST200	        18	/* STMicroelectronics ST200  */
166 #define IH_ARCH_SANDBOX		19	/* Sandbox architecture (test only) */
167 #define IH_ARCH_NDS32	        20	/* ANDES Technology - NDS32  */
168 #define IH_ARCH_OPENRISC        21	/* OpenRISC 1000  */
169 #define IH_ARCH_ARM64		22	/* ARM64	*/
170 #define IH_ARCH_ARC		23	/* Synopsys DesignWare ARC */
171 
172 /*
173  * Image Types
174  *
175  * "Standalone Programs" are directly runnable in the environment
176  *	provided by U-Boot; it is expected that (if they behave
177  *	well) you can continue to work in U-Boot after return from
178  *	the Standalone Program.
179  * "OS Kernel Images" are usually images of some Embedded OS which
180  *	will take over control completely. Usually these programs
181  *	will install their own set of exception handlers, device
182  *	drivers, set up the MMU, etc. - this means, that you cannot
183  *	expect to re-enter U-Boot except by resetting the CPU.
184  * "RAMDisk Images" are more or less just data blocks, and their
185  *	parameters (address, size) are passed to an OS kernel that is
186  *	being started.
187  * "Multi-File Images" contain several images, typically an OS
188  *	(Linux) kernel image and one or more data images like
189  *	RAMDisks. This construct is useful for instance when you want
190  *	to boot over the network using BOOTP etc., where the boot
191  *	server provides just a single image file, but you want to get
192  *	for instance an OS kernel and a RAMDisk image.
193  *
194  *	"Multi-File Images" start with a list of image sizes, each
195  *	image size (in bytes) specified by an "uint32_t" in network
196  *	byte order. This list is terminated by an "(uint32_t)0".
197  *	Immediately after the terminating 0 follow the images, one by
198  *	one, all aligned on "uint32_t" boundaries (size rounded up to
199  *	a multiple of 4 bytes - except for the last file).
200  *
201  * "Firmware Images" are binary images containing firmware (like
202  *	U-Boot or FPGA images) which usually will be programmed to
203  *	flash memory.
204  *
205  * "Script files" are command sequences that will be executed by
206  *	U-Boot's command interpreter; this feature is especially
207  *	useful when you configure U-Boot to use a real shell (hush)
208  *	as command interpreter (=> Shell Scripts).
209  */
210 
211 #define IH_TYPE_INVALID		0	/* Invalid Image		*/
212 #define IH_TYPE_STANDALONE	1	/* Standalone Program		*/
213 #define IH_TYPE_KERNEL		2	/* OS Kernel Image		*/
214 #define IH_TYPE_RAMDISK		3	/* RAMDisk Image		*/
215 #define IH_TYPE_MULTI		4	/* Multi-File Image		*/
216 #define IH_TYPE_FIRMWARE	5	/* Firmware Image		*/
217 #define IH_TYPE_SCRIPT		6	/* Script file			*/
218 #define IH_TYPE_FILESYSTEM	7	/* Filesystem Image (any type)	*/
219 #define IH_TYPE_FLATDT		8	/* Binary Flat Device Tree Blob	*/
220 #define IH_TYPE_KWBIMAGE	9	/* Kirkwood Boot Image		*/
221 #define IH_TYPE_IMXIMAGE	10	/* Freescale IMXBoot Image	*/
222 #define IH_TYPE_UBLIMAGE	11	/* Davinci UBL Image		*/
223 #define IH_TYPE_OMAPIMAGE	12	/* TI OMAP Config Header Image	*/
224 #define IH_TYPE_AISIMAGE	13	/* TI Davinci AIS Image		*/
225 #define IH_TYPE_KERNEL_NOLOAD	14	/* OS Kernel Image, can run from any load address */
226 #define IH_TYPE_PBLIMAGE	15	/* Freescale PBL Boot Image	*/
227 #define IH_TYPE_MXSIMAGE	16	/* Freescale MXSBoot Image	*/
228 #define IH_TYPE_GPIMAGE		17	/* TI Keystone GPHeader Image	*/
229 #define IH_TYPE_ATMELIMAGE	18	/* ATMEL ROM bootable Image	*/
230 
231 /*
232  * Compression Types
233  */
234 #define IH_COMP_NONE		0	/*  No	 Compression Used	*/
235 #define IH_COMP_GZIP		1	/* gzip	 Compression Used	*/
236 #define IH_COMP_BZIP2		2	/* bzip2 Compression Used	*/
237 #define IH_COMP_LZMA		3	/* lzma  Compression Used	*/
238 #define IH_COMP_LZO		4	/* lzo   Compression Used	*/
239 
240 #define IH_MAGIC	0x27051956	/* Image Magic Number		*/
241 #define IH_NMLEN		32	/* Image Name Length		*/
242 
243 /* Reused from common.h */
244 #define ROUND(a, b)		(((a) + (b) - 1) & ~((b) - 1))
245 
246 /*
247  * Legacy format image header,
248  * all data in network byte order (aka natural aka bigendian).
249  */
250 typedef struct image_header {
251 	__be32		ih_magic;	/* Image Header Magic Number	*/
252 	__be32		ih_hcrc;	/* Image Header CRC Checksum	*/
253 	__be32		ih_time;	/* Image Creation Timestamp	*/
254 	__be32		ih_size;	/* Image Data Size		*/
255 	__be32		ih_load;	/* Data	 Load  Address		*/
256 	__be32		ih_ep;		/* Entry Point Address		*/
257 	__be32		ih_dcrc;	/* Image Data CRC Checksum	*/
258 	uint8_t		ih_os;		/* Operating System		*/
259 	uint8_t		ih_arch;	/* CPU architecture		*/
260 	uint8_t		ih_type;	/* Image Type			*/
261 	uint8_t		ih_comp;	/* Compression Type		*/
262 	uint8_t		ih_name[IH_NMLEN];	/* Image Name		*/
263 } image_header_t;
264 
265 typedef struct image_info {
266 	ulong		start, end;		/* start/end of blob */
267 	ulong		image_start, image_len; /* start of image within blob, len of image */
268 	ulong		load;			/* load addr for the image */
269 	uint8_t		comp, type, os;		/* compression, type of image, os type */
270 } image_info_t;
271 
272 /*
273  * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>()
274  * routines.
275  */
276 typedef struct bootm_headers {
277 	/*
278 	 * Legacy os image header, if it is a multi component image
279 	 * then boot_get_ramdisk() and get_fdt() will attempt to get
280 	 * data from second and third component accordingly.
281 	 */
282 	image_header_t	*legacy_hdr_os;		/* image header pointer */
283 	image_header_t	legacy_hdr_os_copy;	/* header copy */
284 	ulong		legacy_hdr_valid;
285 
286 #if defined(CONFIG_FIT)
287 	const char	*fit_uname_cfg;	/* configuration node unit name */
288 
289 	void		*fit_hdr_os;	/* os FIT image header */
290 	const char	*fit_uname_os;	/* os subimage node unit name */
291 	int		fit_noffset_os;	/* os subimage node offset */
292 
293 	void		*fit_hdr_rd;	/* init ramdisk FIT image header */
294 	const char	*fit_uname_rd;	/* init ramdisk subimage node unit name */
295 	int		fit_noffset_rd;	/* init ramdisk subimage node offset */
296 
297 	void		*fit_hdr_fdt;	/* FDT blob FIT image header */
298 	const char	*fit_uname_fdt;	/* FDT blob subimage node unit name */
299 	int		fit_noffset_fdt;/* FDT blob subimage node offset */
300 #endif
301 
302 #ifndef USE_HOSTCC
303 	image_info_t	os;		/* os image info */
304 	ulong		ep;		/* entry point of OS */
305 
306 	ulong		rd_start, rd_end;/* ramdisk start/end */
307 
308 	char		*ft_addr;	/* flat dev tree address */
309 	ulong		ft_len;		/* length of flat device tree */
310 
311 	ulong		initrd_start;
312 	ulong		initrd_end;
313 	ulong		cmdline_start;
314 	ulong		cmdline_end;
315 	bd_t		*kbd;
316 #endif
317 
318 	int		verify;		/* getenv("verify")[0] != 'n' */
319 
320 #define	BOOTM_STATE_START	(0x00000001)
321 #define	BOOTM_STATE_FINDOS	(0x00000002)
322 #define	BOOTM_STATE_FINDOTHER	(0x00000004)
323 #define	BOOTM_STATE_LOADOS	(0x00000008)
324 #define	BOOTM_STATE_RAMDISK	(0x00000010)
325 #define	BOOTM_STATE_FDT		(0x00000020)
326 #define	BOOTM_STATE_OS_CMDLINE	(0x00000040)
327 #define	BOOTM_STATE_OS_BD_T	(0x00000080)
328 #define	BOOTM_STATE_OS_PREP	(0x00000100)
329 #define	BOOTM_STATE_OS_FAKE_GO	(0x00000200)	/* 'Almost' run the OS */
330 #define	BOOTM_STATE_OS_GO	(0x00000400)
331 	int		state;
332 
333 #ifdef CONFIG_LMB
334 	struct lmb	lmb;		/* for memory mgmt */
335 #endif
336 } bootm_headers_t;
337 
338 extern bootm_headers_t images;
339 
340 /*
341  * Some systems (for example LWMON) have very short watchdog periods;
342  * we must make sure to split long operations like memmove() or
343  * checksum calculations into reasonable chunks.
344  */
345 #ifndef CHUNKSZ
346 #define CHUNKSZ (64 * 1024)
347 #endif
348 
349 #ifndef CHUNKSZ_CRC32
350 #define CHUNKSZ_CRC32 (64 * 1024)
351 #endif
352 
353 #ifndef CHUNKSZ_MD5
354 #define CHUNKSZ_MD5 (64 * 1024)
355 #endif
356 
357 #ifndef CHUNKSZ_SHA1
358 #define CHUNKSZ_SHA1 (64 * 1024)
359 #endif
360 
361 #define uimage_to_cpu(x)		be32_to_cpu(x)
362 #define cpu_to_uimage(x)		cpu_to_be32(x)
363 
364 /*
365  * Translation table for entries of a specific type; used by
366  * get_table_entry_id() and get_table_entry_name().
367  */
368 typedef struct table_entry {
369 	int	id;
370 	char	*sname;		/* short (input) name to find table entry */
371 	char	*lname;		/* long (output) name to print for messages */
372 } table_entry_t;
373 
374 /*
375  * get_table_entry_id() scans the translation table trying to find an
376  * entry that matches the given short name. If a matching entry is
377  * found, it's id is returned to the caller.
378  */
379 int get_table_entry_id(const table_entry_t *table,
380 		const char *table_name, const char *name);
381 /*
382  * get_table_entry_name() scans the translation table trying to find
383  * an entry that matches the given id. If a matching entry is found,
384  * its long name is returned to the caller.
385  */
386 char *get_table_entry_name(const table_entry_t *table, char *msg, int id);
387 
388 const char *genimg_get_os_name(uint8_t os);
389 const char *genimg_get_arch_name(uint8_t arch);
390 const char *genimg_get_type_name(uint8_t type);
391 const char *genimg_get_comp_name(uint8_t comp);
392 int genimg_get_os_id(const char *name);
393 int genimg_get_arch_id(const char *name);
394 int genimg_get_type_id(const char *name);
395 int genimg_get_comp_id(const char *name);
396 void genimg_print_size(uint32_t size);
397 
398 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \
399 	defined(USE_HOSTCC)
400 #define IMAGE_ENABLE_TIMESTAMP 1
401 #else
402 #define IMAGE_ENABLE_TIMESTAMP 0
403 #endif
404 void genimg_print_time(time_t timestamp);
405 
406 /* What to do with a image load address ('load = <> 'in the FIT) */
407 enum fit_load_op {
408 	FIT_LOAD_IGNORED,	/* Ignore load address */
409 	FIT_LOAD_OPTIONAL,	/* Can be provided, but optional */
410 	FIT_LOAD_REQUIRED,	/* Must be provided */
411 };
412 
413 #ifndef USE_HOSTCC
414 /* Image format types, returned by _get_format() routine */
415 #define IMAGE_FORMAT_INVALID	0x00
416 #if defined(CONFIG_IMAGE_FORMAT_LEGACY)
417 #define IMAGE_FORMAT_LEGACY	0x01	/* legacy image_header based format */
418 #endif
419 #define IMAGE_FORMAT_FIT	0x02	/* new, libfdt based format */
420 #define IMAGE_FORMAT_ANDROID	0x03	/* Android boot image */
421 
422 int genimg_get_format(const void *img_addr);
423 int genimg_has_config(bootm_headers_t *images);
424 ulong genimg_get_image(ulong img_addr);
425 
426 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images,
427 		uint8_t arch, ulong *rd_start, ulong *rd_end);
428 #endif
429 
430 /**
431  * fit_image_load() - load an image from a FIT
432  *
433  * This deals with all aspects of loading an image from a FIT, including
434  * selecting the right image based on configuration, verifying it, printing
435  * out progress messages, checking the type/arch/os and optionally copying it
436  * to the right load address.
437  *
438  * The property to look up is defined by image_type.
439  *
440  * @param images	Boot images structure
441  * @param addr		Address of FIT in memory
442  * @param fit_unamep	On entry this is the requested image name
443  *			(e.g. "kernel@1") or NULL to use the default. On exit
444  *			points to the selected image name
445  * @param fit_uname_configp	On entry this is the requested configuration
446  *			name (e.g. "conf@1") or NULL to use the default. On
447  *			exit points to the selected configuration name.
448  * @param arch		Expected architecture (IH_ARCH_...)
449  * @param image_type	Required image type (IH_TYPE_...). If this is
450  *			IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD
451  *			also.
452  * @param bootstage_id	ID of starting bootstage to use for progress updates.
453  *			This will be added to the BOOTSTAGE_SUB values when
454  *			calling bootstage_mark()
455  * @param load_op	Decribes what to do with the load address
456  * @param datap		Returns address of loaded image
457  * @param lenp		Returns length of loaded image
458  * @return node offset of image, or -ve error code on error
459  */
460 int fit_image_load(bootm_headers_t *images, ulong addr,
461 		   const char **fit_unamep, const char **fit_uname_configp,
462 		   int arch, int image_type, int bootstage_id,
463 		   enum fit_load_op load_op, ulong *datap, ulong *lenp);
464 
465 #ifndef USE_HOSTCC
466 /**
467  * fit_get_node_from_config() - Look up an image a FIT by type
468  *
469  * This looks in the selected conf@ node (images->fit_uname_cfg) for a
470  * particular image type (e.g. "kernel") and then finds the image that is
471  * referred to.
472  *
473  * For example, for something like:
474  *
475  * images {
476  *	kernel@1 {
477  *		...
478  *	};
479  * };
480  * configurations {
481  *	conf@1 {
482  *		kernel = "kernel@1";
483  *	};
484  * };
485  *
486  * the function will return the node offset of the kernel@1 node, assuming
487  * that conf@1 is the chosen configuration.
488  *
489  * @param images	Boot images structure
490  * @param prop_name	Property name to look up (FIT_..._PROP)
491  * @param addr		Address of FIT in memory
492  */
493 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name,
494 			ulong addr);
495 
496 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch,
497 		 bootm_headers_t *images,
498 		 char **of_flat_tree, ulong *of_size);
499 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob);
500 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size);
501 
502 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len,
503 		  ulong *initrd_start, ulong *initrd_end);
504 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end);
505 #ifdef CONFIG_SYS_BOOT_GET_KBD
506 int boot_get_kbd(struct lmb *lmb, bd_t **kbd);
507 #endif /* CONFIG_SYS_BOOT_GET_KBD */
508 #endif /* !USE_HOSTCC */
509 
510 /*******************************************************************/
511 /* Legacy format specific code (prefixed with image_) */
512 /*******************************************************************/
513 static inline uint32_t image_get_header_size(void)
514 {
515 	return (sizeof(image_header_t));
516 }
517 
518 #define image_get_hdr_l(f) \
519 	static inline uint32_t image_get_##f(const image_header_t *hdr) \
520 	{ \
521 		return uimage_to_cpu(hdr->ih_##f); \
522 	}
523 image_get_hdr_l(magic)		/* image_get_magic */
524 image_get_hdr_l(hcrc)		/* image_get_hcrc */
525 image_get_hdr_l(time)		/* image_get_time */
526 image_get_hdr_l(size)		/* image_get_size */
527 image_get_hdr_l(load)		/* image_get_load */
528 image_get_hdr_l(ep)		/* image_get_ep */
529 image_get_hdr_l(dcrc)		/* image_get_dcrc */
530 
531 #define image_get_hdr_b(f) \
532 	static inline uint8_t image_get_##f(const image_header_t *hdr) \
533 	{ \
534 		return hdr->ih_##f; \
535 	}
536 image_get_hdr_b(os)		/* image_get_os */
537 image_get_hdr_b(arch)		/* image_get_arch */
538 image_get_hdr_b(type)		/* image_get_type */
539 image_get_hdr_b(comp)		/* image_get_comp */
540 
541 static inline char *image_get_name(const image_header_t *hdr)
542 {
543 	return (char *)hdr->ih_name;
544 }
545 
546 static inline uint32_t image_get_data_size(const image_header_t *hdr)
547 {
548 	return image_get_size(hdr);
549 }
550 
551 /**
552  * image_get_data - get image payload start address
553  * @hdr: image header
554  *
555  * image_get_data() returns address of the image payload. For single
556  * component images it is image data start. For multi component
557  * images it points to the null terminated table of sub-images sizes.
558  *
559  * returns:
560  *     image payload data start address
561  */
562 static inline ulong image_get_data(const image_header_t *hdr)
563 {
564 	return ((ulong)hdr + image_get_header_size());
565 }
566 
567 static inline uint32_t image_get_image_size(const image_header_t *hdr)
568 {
569 	return (image_get_size(hdr) + image_get_header_size());
570 }
571 static inline ulong image_get_image_end(const image_header_t *hdr)
572 {
573 	return ((ulong)hdr + image_get_image_size(hdr));
574 }
575 
576 #define image_set_hdr_l(f) \
577 	static inline void image_set_##f(image_header_t *hdr, uint32_t val) \
578 	{ \
579 		hdr->ih_##f = cpu_to_uimage(val); \
580 	}
581 image_set_hdr_l(magic)		/* image_set_magic */
582 image_set_hdr_l(hcrc)		/* image_set_hcrc */
583 image_set_hdr_l(time)		/* image_set_time */
584 image_set_hdr_l(size)		/* image_set_size */
585 image_set_hdr_l(load)		/* image_set_load */
586 image_set_hdr_l(ep)		/* image_set_ep */
587 image_set_hdr_l(dcrc)		/* image_set_dcrc */
588 
589 #define image_set_hdr_b(f) \
590 	static inline void image_set_##f(image_header_t *hdr, uint8_t val) \
591 	{ \
592 		hdr->ih_##f = val; \
593 	}
594 image_set_hdr_b(os)		/* image_set_os */
595 image_set_hdr_b(arch)		/* image_set_arch */
596 image_set_hdr_b(type)		/* image_set_type */
597 image_set_hdr_b(comp)		/* image_set_comp */
598 
599 static inline void image_set_name(image_header_t *hdr, const char *name)
600 {
601 	strncpy(image_get_name(hdr), name, IH_NMLEN);
602 }
603 
604 int image_check_hcrc(const image_header_t *hdr);
605 int image_check_dcrc(const image_header_t *hdr);
606 #ifndef USE_HOSTCC
607 ulong getenv_bootm_low(void);
608 phys_size_t getenv_bootm_size(void);
609 phys_size_t getenv_bootm_mapsize(void);
610 #endif
611 void memmove_wd(void *to, void *from, size_t len, ulong chunksz);
612 
613 static inline int image_check_magic(const image_header_t *hdr)
614 {
615 	return (image_get_magic(hdr) == IH_MAGIC);
616 }
617 static inline int image_check_type(const image_header_t *hdr, uint8_t type)
618 {
619 	return (image_get_type(hdr) == type);
620 }
621 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch)
622 {
623 	return (image_get_arch(hdr) == arch);
624 }
625 static inline int image_check_os(const image_header_t *hdr, uint8_t os)
626 {
627 	return (image_get_os(hdr) == os);
628 }
629 
630 ulong image_multi_count(const image_header_t *hdr);
631 void image_multi_getimg(const image_header_t *hdr, ulong idx,
632 			ulong *data, ulong *len);
633 
634 void image_print_contents(const void *hdr);
635 
636 #ifndef USE_HOSTCC
637 static inline int image_check_target_arch(const image_header_t *hdr)
638 {
639 #ifndef IH_ARCH_DEFAULT
640 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h"
641 #endif
642 	return image_check_arch(hdr, IH_ARCH_DEFAULT);
643 }
644 #endif /* USE_HOSTCC */
645 
646 /**
647  * Set up properties in the FDT
648  *
649  * This sets up properties in the FDT that is to be passed to linux.
650  *
651  * @images:	Images information
652  * @blob:	FDT to update
653  * @of_size:	Size of the FDT
654  * @lmb:	Points to logical memory block structure
655  * @return 0 if ok, <0 on failure
656  */
657 int image_setup_libfdt(bootm_headers_t *images, void *blob,
658 		       int of_size, struct lmb *lmb);
659 
660 /**
661  * Set up the FDT to use for booting a kernel
662  *
663  * This performs ramdisk setup, sets up the FDT if required, and adds
664  * paramters to the FDT if libfdt is available.
665  *
666  * @param images	Images information
667  * @return 0 if ok, <0 on failure
668  */
669 int image_setup_linux(bootm_headers_t *images);
670 
671 /**
672  * bootz_setup() - Extract stat and size of a Linux xImage
673  *
674  * @image: Address of image
675  * @start: Returns start address of image
676  * @end : Returns end address of image
677  * @return 0 if OK, 1 if the image was not recognised
678  */
679 int bootz_setup(ulong image, ulong *start, ulong *end);
680 
681 
682 /*******************************************************************/
683 /* New uImage format specific code (prefixed with fit_) */
684 /*******************************************************************/
685 #if defined(CONFIG_FIT)
686 
687 #define FIT_IMAGES_PATH		"/images"
688 #define FIT_CONFS_PATH		"/configurations"
689 
690 /* hash/signature node */
691 #define FIT_HASH_NODENAME	"hash"
692 #define FIT_ALGO_PROP		"algo"
693 #define FIT_VALUE_PROP		"value"
694 #define FIT_IGNORE_PROP		"uboot-ignore"
695 #define FIT_SIG_NODENAME	"signature"
696 
697 /* image node */
698 #define FIT_DATA_PROP		"data"
699 #define FIT_TIMESTAMP_PROP	"timestamp"
700 #define FIT_DESC_PROP		"description"
701 #define FIT_ARCH_PROP		"arch"
702 #define FIT_TYPE_PROP		"type"
703 #define FIT_OS_PROP		"os"
704 #define FIT_COMP_PROP		"compression"
705 #define FIT_ENTRY_PROP		"entry"
706 #define FIT_LOAD_PROP		"load"
707 
708 /* configuration node */
709 #define FIT_KERNEL_PROP		"kernel"
710 #define FIT_RAMDISK_PROP	"ramdisk"
711 #define FIT_FDT_PROP		"fdt"
712 #define FIT_DEFAULT_PROP	"default"
713 
714 #define FIT_MAX_HASH_LEN	HASH_MAX_DIGEST_SIZE
715 
716 /* cmdline argument format parsing */
717 int fit_parse_conf(const char *spec, ulong addr_curr,
718 		ulong *addr, const char **conf_name);
719 int fit_parse_subimage(const char *spec, ulong addr_curr,
720 		ulong *addr, const char **image_name);
721 
722 void fit_print_contents(const void *fit);
723 void fit_image_print(const void *fit, int noffset, const char *p);
724 
725 /**
726  * fit_get_end - get FIT image size
727  * @fit: pointer to the FIT format image header
728  *
729  * returns:
730  *     size of the FIT image (blob) in memory
731  */
732 static inline ulong fit_get_size(const void *fit)
733 {
734 	return fdt_totalsize(fit);
735 }
736 
737 /**
738  * fit_get_end - get FIT image end
739  * @fit: pointer to the FIT format image header
740  *
741  * returns:
742  *     end address of the FIT image (blob) in memory
743  */
744 static inline ulong fit_get_end(const void *fit)
745 {
746 	return (ulong)fit + fdt_totalsize(fit);
747 }
748 
749 /**
750  * fit_get_name - get FIT node name
751  * @fit: pointer to the FIT format image header
752  *
753  * returns:
754  *     NULL, on error
755  *     pointer to node name, on success
756  */
757 static inline const char *fit_get_name(const void *fit_hdr,
758 		int noffset, int *len)
759 {
760 	return fdt_get_name(fit_hdr, noffset, len);
761 }
762 
763 int fit_get_desc(const void *fit, int noffset, char **desc);
764 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp);
765 
766 int fit_image_get_node(const void *fit, const char *image_uname);
767 int fit_image_get_os(const void *fit, int noffset, uint8_t *os);
768 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch);
769 int fit_image_get_type(const void *fit, int noffset, uint8_t *type);
770 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp);
771 int fit_image_get_load(const void *fit, int noffset, ulong *load);
772 int fit_image_get_entry(const void *fit, int noffset, ulong *entry);
773 int fit_image_get_data(const void *fit, int noffset,
774 				const void **data, size_t *size);
775 
776 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo);
777 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value,
778 				int *value_len);
779 
780 int fit_set_timestamp(void *fit, int noffset, time_t timestamp);
781 
782 /**
783  * fit_add_verification_data() - add verification data to FIT image nodes
784  *
785  * @keydir:	Directory containing keys
786  * @kwydest:	FDT blob to write public key information to
787  * @fit:	Pointer to the FIT format image header
788  * @comment:	Comment to add to signature nodes
789  * @require_keys: Mark all keys as 'required'
790  *
791  * Adds hash values for all component images in the FIT blob.
792  * Hashes are calculated for all component images which have hash subnodes
793  * with algorithm property set to one of the supported hash algorithms.
794  *
795  * Also add signatures if signature nodes are present.
796  *
797  * returns
798  *     0, on success
799  *     libfdt error code, on failure
800  */
801 int fit_add_verification_data(const char *keydir, void *keydest, void *fit,
802 			      const char *comment, int require_keys);
803 
804 int fit_image_verify(const void *fit, int noffset);
805 int fit_config_verify(const void *fit, int conf_noffset);
806 int fit_all_image_verify(const void *fit);
807 int fit_image_check_os(const void *fit, int noffset, uint8_t os);
808 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch);
809 int fit_image_check_type(const void *fit, int noffset, uint8_t type);
810 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp);
811 int fit_check_format(const void *fit);
812 
813 int fit_conf_find_compat(const void *fit, const void *fdt);
814 int fit_conf_get_node(const void *fit, const char *conf_uname);
815 
816 /**
817  * fit_conf_get_prop_node() - Get node refered to by a configuration
818  * @fit:	FIT to check
819  * @noffset:	Offset of conf@xxx node to check
820  * @prop_name:	Property to read from the conf node
821  *
822  * The conf@ nodes contain references to other nodes, using properties
823  * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"),
824  * return the offset of the node referred to (e.g. offset of node
825  * "/images/kernel@1".
826  */
827 int fit_conf_get_prop_node(const void *fit, int noffset,
828 		const char *prop_name);
829 
830 void fit_conf_print(const void *fit, int noffset, const char *p);
831 
832 int fit_check_ramdisk(const void *fit, int os_noffset,
833 		uint8_t arch, int verify);
834 
835 int calculate_hash(const void *data, int data_len, const char *algo,
836 			uint8_t *value, int *value_len);
837 
838 /*
839  * At present we only support signing on the host, and verification on the
840  * device
841  */
842 #if defined(CONFIG_FIT_SIGNATURE)
843 # ifdef USE_HOSTCC
844 #  define IMAGE_ENABLE_SIGN	1
845 #  define IMAGE_ENABLE_VERIFY	1
846 # include  <openssl/evp.h>
847 #else
848 #  define IMAGE_ENABLE_SIGN	0
849 #  define IMAGE_ENABLE_VERIFY	1
850 # endif
851 #else
852 # define IMAGE_ENABLE_SIGN	0
853 # define IMAGE_ENABLE_VERIFY	0
854 #endif
855 
856 #ifdef USE_HOSTCC
857 void *image_get_host_blob(void);
858 void image_set_host_blob(void *host_blob);
859 # define gd_fdt_blob()		image_get_host_blob()
860 #else
861 # define gd_fdt_blob()		(gd->fdt_blob)
862 #endif
863 
864 #ifdef CONFIG_FIT_BEST_MATCH
865 #define IMAGE_ENABLE_BEST_MATCH	1
866 #else
867 #define IMAGE_ENABLE_BEST_MATCH	0
868 #endif
869 
870 /* Information passed to the signing routines */
871 struct image_sign_info {
872 	const char *keydir;		/* Directory conaining keys */
873 	const char *keyname;		/* Name of key to use */
874 	void *fit;			/* Pointer to FIT blob */
875 	int node_offset;		/* Offset of signature node */
876 	struct image_sig_algo *algo;	/* Algorithm information */
877 	const void *fdt_blob;		/* FDT containing public keys */
878 	int required_keynode;		/* Node offset of key to use: -1=any */
879 	const char *require_keys;	/* Value for 'required' property */
880 };
881 
882 /* A part of an image, used for hashing */
883 struct image_region {
884 	const void *data;
885 	int size;
886 };
887 
888 #if IMAGE_ENABLE_VERIFY
889 # include <u-boot/rsa-checksum.h>
890 #endif
891 struct checksum_algo {
892 	const char *name;
893 	const int checksum_len;
894 	const int pad_len;
895 #if IMAGE_ENABLE_SIGN
896 	const EVP_MD *(*calculate_sign)(void);
897 #endif
898 	void (*calculate)(const struct image_region region[],
899 			  int region_count, uint8_t *checksum);
900 	const uint8_t *rsa_padding;
901 };
902 
903 struct image_sig_algo {
904 	const char *name;		/* Name of algorithm */
905 
906 	/**
907 	 * sign() - calculate and return signature for given input data
908 	 *
909 	 * @info:	Specifies key and FIT information
910 	 * @data:	Pointer to the input data
911 	 * @data_len:	Data length
912 	 * @sigp:	Set to an allocated buffer holding the signature
913 	 * @sig_len:	Set to length of the calculated hash
914 	 *
915 	 * This computes input data signature according to selected algorithm.
916 	 * Resulting signature value is placed in an allocated buffer, the
917 	 * pointer is returned as *sigp. The length of the calculated
918 	 * signature is returned via the sig_len pointer argument. The caller
919 	 * should free *sigp.
920 	 *
921 	 * @return: 0, on success, -ve on error
922 	 */
923 	int (*sign)(struct image_sign_info *info,
924 		    const struct image_region region[],
925 		    int region_count, uint8_t **sigp, uint *sig_len);
926 
927 	/**
928 	 * add_verify_data() - Add verification information to FDT
929 	 *
930 	 * Add public key information to the FDT node, suitable for
931 	 * verification at run-time. The information added depends on the
932 	 * algorithm being used.
933 	 *
934 	 * @info:	Specifies key and FIT information
935 	 * @keydest:	Destination FDT blob for public key data
936 	 * @return: 0, on success, -ve on error
937 	 */
938 	int (*add_verify_data)(struct image_sign_info *info, void *keydest);
939 
940 	/**
941 	 * verify() - Verify a signature against some data
942 	 *
943 	 * @info:	Specifies key and FIT information
944 	 * @data:	Pointer to the input data
945 	 * @data_len:	Data length
946 	 * @sig:	Signature
947 	 * @sig_len:	Number of bytes in signature
948 	 * @return 0 if verified, -ve on error
949 	 */
950 	int (*verify)(struct image_sign_info *info,
951 		      const struct image_region region[], int region_count,
952 		      uint8_t *sig, uint sig_len);
953 
954 	/* pointer to checksum algorithm */
955 	struct checksum_algo *checksum;
956 };
957 
958 /**
959  * image_get_sig_algo() - Look up a signature algortihm
960  *
961  * @param name		Name of algorithm
962  * @return pointer to algorithm information, or NULL if not found
963  */
964 struct image_sig_algo *image_get_sig_algo(const char *name);
965 
966 /**
967  * fit_image_verify_required_sigs() - Verify signatures marked as 'required'
968  *
969  * @fit:		FIT to check
970  * @image_noffset:	Offset of image node to check
971  * @data:		Image data to check
972  * @size:		Size of image data
973  * @sig_blob:		FDT containing public keys
974  * @no_sigsp:		Returns 1 if no signatures were required, and
975  *			therefore nothing was checked. The caller may wish
976  *			to fall back to other mechanisms, or refuse to
977  *			boot.
978  * @return 0 if all verified ok, <0 on error
979  */
980 int fit_image_verify_required_sigs(const void *fit, int image_noffset,
981 		const char *data, size_t size, const void *sig_blob,
982 		int *no_sigsp);
983 
984 /**
985  * fit_image_check_sig() - Check a single image signature node
986  *
987  * @fit:		FIT to check
988  * @noffset:		Offset of signature node to check
989  * @data:		Image data to check
990  * @size:		Size of image data
991  * @required_keynode:	Offset in the control FDT of the required key node,
992  *			if any. If this is given, then the image wil not
993  *			pass verification unless that key is used. If this is
994  *			-1 then any signature will do.
995  * @err_msgp:		In the event of an error, this will be pointed to a
996  *			help error string to display to the user.
997  * @return 0 if all verified ok, <0 on error
998  */
999 int fit_image_check_sig(const void *fit, int noffset, const void *data,
1000 		size_t size, int required_keynode, char **err_msgp);
1001 
1002 /**
1003  * fit_region_make_list() - Make a list of regions to hash
1004  *
1005  * Given a list of FIT regions (offset, size) provided by libfdt, create
1006  * a list of regions (void *, size) for use by the signature creationg
1007  * and verification code.
1008  *
1009  * @fit:		FIT image to process
1010  * @fdt_regions:	Regions as returned by libfdt
1011  * @count:		Number of regions returned by libfdt
1012  * @region:		Place to put list of regions (NULL to allocate it)
1013  * @return pointer to list of regions, or NULL if out of memory
1014  */
1015 struct image_region *fit_region_make_list(const void *fit,
1016 		struct fdt_region *fdt_regions, int count,
1017 		struct image_region *region);
1018 
1019 static inline int fit_image_check_target_arch(const void *fdt, int node)
1020 {
1021 #ifndef USE_HOSTCC
1022 	return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT);
1023 #else
1024 	return 0;
1025 #endif
1026 }
1027 
1028 #ifdef CONFIG_FIT_VERBOSE
1029 #define fit_unsupported(msg)	printf("! %s:%d " \
1030 				"FIT images not supported for '%s'\n", \
1031 				__FILE__, __LINE__, (msg))
1032 
1033 #define fit_unsupported_reset(msg)	printf("! %s:%d " \
1034 				"FIT images not supported for '%s' " \
1035 				"- must reset board to recover!\n", \
1036 				__FILE__, __LINE__, (msg))
1037 #else
1038 #define fit_unsupported(msg)
1039 #define fit_unsupported_reset(msg)
1040 #endif /* CONFIG_FIT_VERBOSE */
1041 #endif /* CONFIG_FIT */
1042 
1043 #if defined(CONFIG_ANDROID_BOOT_IMAGE)
1044 struct andr_img_hdr;
1045 int android_image_check_header(const struct andr_img_hdr *hdr);
1046 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify,
1047 			     ulong *os_data, ulong *os_len);
1048 int android_image_get_ramdisk(const struct andr_img_hdr *hdr,
1049 			      ulong *rd_data, ulong *rd_len);
1050 ulong android_image_get_end(const struct andr_img_hdr *hdr);
1051 ulong android_image_get_kload(const struct andr_img_hdr *hdr);
1052 
1053 #endif /* CONFIG_ANDROID_BOOT_IMAGE */
1054 
1055 #endif	/* __IMAGE_H__ */
1056