1 /* 2 * (C) Copyright 2008 Semihalf 3 * 4 * (C) Copyright 2000-2005 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 ******************************************************************** 9 * NOTE: This header file defines an interface to U-Boot. Including 10 * this (unmodified) header file in another file is considered normal 11 * use of U-Boot, and does *not* fall under the heading of "derived 12 * work". 13 ******************************************************************** 14 */ 15 16 #ifndef __IMAGE_H__ 17 #define __IMAGE_H__ 18 19 #include "compiler.h" 20 #include <asm/byteorder.h> 21 22 /* Define this to avoid #ifdefs later on */ 23 struct lmb; 24 25 #ifdef USE_HOSTCC 26 #include <sys/types.h> 27 28 /* new uImage format support enabled on host */ 29 #define IMAGE_ENABLE_FIT 1 30 #define IMAGE_ENABLE_OF_LIBFDT 1 31 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 32 #define CONFIG_FIT_ENABLE_SHA256_SUPPORT 33 #define CONFIG_SHA1 34 #define CONFIG_SHA256 35 36 #define IMAGE_ENABLE_IGNORE 0 37 #define IMAGE_INDENT_STRING "" 38 39 #else 40 41 #include <lmb.h> 42 #include <asm/u-boot.h> 43 #include <command.h> 44 45 /* Take notice of the 'ignore' property for hashes */ 46 #define IMAGE_ENABLE_IGNORE 1 47 #define IMAGE_INDENT_STRING " " 48 49 #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT) 50 #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT) 51 52 #endif /* USE_HOSTCC */ 53 54 #if IMAGE_ENABLE_FIT 55 #include <hash.h> 56 #include <linux/libfdt.h> 57 #include <fdt_support.h> 58 # ifdef CONFIG_SPL_BUILD 59 # ifdef CONFIG_SPL_CRC32_SUPPORT 60 # define IMAGE_ENABLE_CRC32 1 61 # endif 62 # ifdef CONFIG_SPL_MD5_SUPPORT 63 # define IMAGE_ENABLE_MD5 1 64 # endif 65 # ifdef CONFIG_SPL_SHA1_SUPPORT 66 # define IMAGE_ENABLE_SHA1 1 67 # endif 68 # else 69 # define CONFIG_CRC32 /* FIT images need CRC32 support */ 70 # define IMAGE_ENABLE_CRC32 1 71 # define IMAGE_ENABLE_MD5 1 72 # define IMAGE_ENABLE_SHA1 1 73 # endif 74 75 #ifndef IMAGE_ENABLE_CRC32 76 #define IMAGE_ENABLE_CRC32 0 77 #endif 78 79 #ifndef IMAGE_ENABLE_MD5 80 #define IMAGE_ENABLE_MD5 0 81 #endif 82 83 #ifndef IMAGE_ENABLE_SHA1 84 #define IMAGE_ENABLE_SHA1 0 85 #endif 86 87 #if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \ 88 defined(CONFIG_SPL_SHA256_SUPPORT) 89 #define IMAGE_ENABLE_SHA256 1 90 #else 91 #define IMAGE_ENABLE_SHA256 0 92 #endif 93 94 #endif /* IMAGE_ENABLE_FIT */ 95 96 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE 97 # define IMAGE_BOOT_GET_CMDLINE 1 98 #else 99 # define IMAGE_BOOT_GET_CMDLINE 0 100 #endif 101 102 #ifdef CONFIG_OF_BOARD_SETUP 103 # define IMAGE_OF_BOARD_SETUP 1 104 #else 105 # define IMAGE_OF_BOARD_SETUP 0 106 #endif 107 108 #ifdef CONFIG_OF_SYSTEM_SETUP 109 # define IMAGE_OF_SYSTEM_SETUP 1 110 #else 111 # define IMAGE_OF_SYSTEM_SETUP 0 112 #endif 113 114 enum ih_category { 115 IH_ARCH, 116 IH_COMP, 117 IH_OS, 118 IH_TYPE, 119 120 IH_COUNT, 121 }; 122 123 /* 124 * Operating System Codes 125 * 126 * The following are exposed to uImage header. 127 * Do not change values for backward compatibility. 128 */ 129 enum { 130 IH_OS_INVALID = 0, /* Invalid OS */ 131 IH_OS_OPENBSD, /* OpenBSD */ 132 IH_OS_NETBSD, /* NetBSD */ 133 IH_OS_FREEBSD, /* FreeBSD */ 134 IH_OS_4_4BSD, /* 4.4BSD */ 135 IH_OS_LINUX, /* Linux */ 136 IH_OS_SVR4, /* SVR4 */ 137 IH_OS_ESIX, /* Esix */ 138 IH_OS_SOLARIS, /* Solaris */ 139 IH_OS_IRIX, /* Irix */ 140 IH_OS_SCO, /* SCO */ 141 IH_OS_DELL, /* Dell */ 142 IH_OS_NCR, /* NCR */ 143 IH_OS_LYNXOS, /* LynxOS */ 144 IH_OS_VXWORKS, /* VxWorks */ 145 IH_OS_PSOS, /* pSOS */ 146 IH_OS_QNX, /* QNX */ 147 IH_OS_U_BOOT, /* Firmware */ 148 IH_OS_RTEMS, /* RTEMS */ 149 IH_OS_ARTOS, /* ARTOS */ 150 IH_OS_UNITY, /* Unity OS */ 151 IH_OS_INTEGRITY, /* INTEGRITY */ 152 IH_OS_OSE, /* OSE */ 153 IH_OS_PLAN9, /* Plan 9 */ 154 IH_OS_OPENRTOS, /* OpenRTOS */ 155 IH_OS_ARM_TRUSTED_FIRMWARE, /* ARM Trusted Firmware */ 156 IH_OS_TEE, /* Trusted Execution Environment */ 157 158 IH_OS_COUNT, 159 }; 160 161 /* 162 * CPU Architecture Codes (supported by Linux) 163 * 164 * The following are exposed to uImage header. 165 * Do not change values for backward compatibility. 166 */ 167 enum { 168 IH_ARCH_INVALID = 0, /* Invalid CPU */ 169 IH_ARCH_ALPHA, /* Alpha */ 170 IH_ARCH_ARM, /* ARM */ 171 IH_ARCH_I386, /* Intel x86 */ 172 IH_ARCH_IA64, /* IA64 */ 173 IH_ARCH_MIPS, /* MIPS */ 174 IH_ARCH_MIPS64, /* MIPS 64 Bit */ 175 IH_ARCH_PPC, /* PowerPC */ 176 IH_ARCH_S390, /* IBM S390 */ 177 IH_ARCH_SH, /* SuperH */ 178 IH_ARCH_SPARC, /* Sparc */ 179 IH_ARCH_SPARC64, /* Sparc 64 Bit */ 180 IH_ARCH_M68K, /* M68K */ 181 IH_ARCH_NIOS, /* Nios-32 */ 182 IH_ARCH_MICROBLAZE, /* MicroBlaze */ 183 IH_ARCH_NIOS2, /* Nios-II */ 184 IH_ARCH_BLACKFIN, /* Blackfin */ 185 IH_ARCH_AVR32, /* AVR32 */ 186 IH_ARCH_ST200, /* STMicroelectronics ST200 */ 187 IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */ 188 IH_ARCH_NDS32, /* ANDES Technology - NDS32 */ 189 IH_ARCH_OPENRISC, /* OpenRISC 1000 */ 190 IH_ARCH_ARM64, /* ARM64 */ 191 IH_ARCH_ARC, /* Synopsys DesignWare ARC */ 192 IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */ 193 IH_ARCH_XTENSA, /* Xtensa */ 194 IH_ARCH_RISCV, /* RISC-V */ 195 196 IH_ARCH_COUNT, 197 }; 198 199 /* 200 * Image Types 201 * 202 * "Standalone Programs" are directly runnable in the environment 203 * provided by U-Boot; it is expected that (if they behave 204 * well) you can continue to work in U-Boot after return from 205 * the Standalone Program. 206 * "OS Kernel Images" are usually images of some Embedded OS which 207 * will take over control completely. Usually these programs 208 * will install their own set of exception handlers, device 209 * drivers, set up the MMU, etc. - this means, that you cannot 210 * expect to re-enter U-Boot except by resetting the CPU. 211 * "RAMDisk Images" are more or less just data blocks, and their 212 * parameters (address, size) are passed to an OS kernel that is 213 * being started. 214 * "Multi-File Images" contain several images, typically an OS 215 * (Linux) kernel image and one or more data images like 216 * RAMDisks. This construct is useful for instance when you want 217 * to boot over the network using BOOTP etc., where the boot 218 * server provides just a single image file, but you want to get 219 * for instance an OS kernel and a RAMDisk image. 220 * 221 * "Multi-File Images" start with a list of image sizes, each 222 * image size (in bytes) specified by an "uint32_t" in network 223 * byte order. This list is terminated by an "(uint32_t)0". 224 * Immediately after the terminating 0 follow the images, one by 225 * one, all aligned on "uint32_t" boundaries (size rounded up to 226 * a multiple of 4 bytes - except for the last file). 227 * 228 * "Firmware Images" are binary images containing firmware (like 229 * U-Boot or FPGA images) which usually will be programmed to 230 * flash memory. 231 * 232 * "Script files" are command sequences that will be executed by 233 * U-Boot's command interpreter; this feature is especially 234 * useful when you configure U-Boot to use a real shell (hush) 235 * as command interpreter (=> Shell Scripts). 236 * 237 * The following are exposed to uImage header. 238 * Do not change values for backward compatibility. 239 */ 240 241 enum { 242 IH_TYPE_INVALID = 0, /* Invalid Image */ 243 IH_TYPE_STANDALONE, /* Standalone Program */ 244 IH_TYPE_KERNEL, /* OS Kernel Image */ 245 IH_TYPE_RAMDISK, /* RAMDisk Image */ 246 IH_TYPE_MULTI, /* Multi-File Image */ 247 IH_TYPE_FIRMWARE, /* Firmware Image */ 248 IH_TYPE_SCRIPT, /* Script file */ 249 IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */ 250 IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */ 251 IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */ 252 IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */ 253 IH_TYPE_UBLIMAGE, /* Davinci UBL Image */ 254 IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */ 255 IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */ 256 /* OS Kernel Image, can run from any load address */ 257 IH_TYPE_KERNEL_NOLOAD, 258 IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */ 259 IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */ 260 IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */ 261 IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */ 262 IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA Preloader */ 263 IH_TYPE_X86_SETUP, /* x86 setup.bin Image */ 264 IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */ 265 IH_TYPE_LOADABLE, /* A list of typeless images */ 266 IH_TYPE_RKIMAGE, /* Rockchip Boot Image */ 267 IH_TYPE_RKSD, /* Rockchip SD card */ 268 IH_TYPE_RKSPI, /* Rockchip SPI image */ 269 IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */ 270 IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */ 271 IH_TYPE_FPGA, /* FPGA Image */ 272 IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */ 273 IH_TYPE_TEE, /* Trusted Execution Environment OS Image */ 274 IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */ 275 IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */ 276 IH_TYPE_STM32IMAGE, /* STMicroelectronics STM32 Image */ 277 278 IH_TYPE_COUNT, /* Number of image types */ 279 }; 280 281 /* 282 * Compression Types 283 * 284 * The following are exposed to uImage header. 285 * Do not change values for backward compatibility. 286 */ 287 enum { 288 IH_COMP_NONE = 0, /* No Compression Used */ 289 IH_COMP_GZIP, /* gzip Compression Used */ 290 IH_COMP_BZIP2, /* bzip2 Compression Used */ 291 IH_COMP_LZMA, /* lzma Compression Used */ 292 IH_COMP_LZO, /* lzo Compression Used */ 293 IH_COMP_LZ4, /* lz4 Compression Used */ 294 295 IH_COMP_COUNT, 296 }; 297 298 #define IH_MAGIC 0x27051956 /* Image Magic Number */ 299 #define IH_NMLEN 32 /* Image Name Length */ 300 301 /* Reused from common.h */ 302 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1)) 303 304 /* 305 * Legacy format image header, 306 * all data in network byte order (aka natural aka bigendian). 307 */ 308 typedef struct image_header { 309 __be32 ih_magic; /* Image Header Magic Number */ 310 __be32 ih_hcrc; /* Image Header CRC Checksum */ 311 __be32 ih_time; /* Image Creation Timestamp */ 312 __be32 ih_size; /* Image Data Size */ 313 __be32 ih_load; /* Data Load Address */ 314 __be32 ih_ep; /* Entry Point Address */ 315 __be32 ih_dcrc; /* Image Data CRC Checksum */ 316 uint8_t ih_os; /* Operating System */ 317 uint8_t ih_arch; /* CPU architecture */ 318 uint8_t ih_type; /* Image Type */ 319 uint8_t ih_comp; /* Compression Type */ 320 uint8_t ih_name[IH_NMLEN]; /* Image Name */ 321 } image_header_t; 322 323 typedef struct image_info { 324 ulong start, end; /* start/end of blob */ 325 ulong image_start, image_len; /* start of image within blob, len of image */ 326 ulong load; /* load addr for the image */ 327 uint8_t comp, type, os; /* compression, type of image, os type */ 328 uint8_t arch; /* CPU architecture */ 329 } image_info_t; 330 331 /* 332 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>() 333 * routines. 334 */ 335 typedef struct bootm_headers { 336 /* 337 * Legacy os image header, if it is a multi component image 338 * then boot_get_ramdisk() and get_fdt() will attempt to get 339 * data from second and third component accordingly. 340 */ 341 image_header_t *legacy_hdr_os; /* image header pointer */ 342 image_header_t legacy_hdr_os_copy; /* header copy */ 343 ulong legacy_hdr_valid; 344 345 #if IMAGE_ENABLE_FIT 346 const char *fit_uname_cfg; /* configuration node unit name */ 347 348 void *fit_hdr_os; /* os FIT image header */ 349 const char *fit_uname_os; /* os subimage node unit name */ 350 int fit_noffset_os; /* os subimage node offset */ 351 352 void *fit_hdr_rd; /* init ramdisk FIT image header */ 353 const char *fit_uname_rd; /* init ramdisk subimage node unit name */ 354 int fit_noffset_rd; /* init ramdisk subimage node offset */ 355 356 void *fit_hdr_fdt; /* FDT blob FIT image header */ 357 const char *fit_uname_fdt; /* FDT blob subimage node unit name */ 358 int fit_noffset_fdt;/* FDT blob subimage node offset */ 359 360 void *fit_hdr_setup; /* x86 setup FIT image header */ 361 const char *fit_uname_setup; /* x86 setup subimage node name */ 362 int fit_noffset_setup;/* x86 setup subimage node offset */ 363 #endif 364 365 #ifndef USE_HOSTCC 366 image_info_t os; /* os image info */ 367 ulong ep; /* entry point of OS */ 368 369 ulong rd_start, rd_end;/* ramdisk start/end */ 370 371 char *ft_addr; /* flat dev tree address */ 372 ulong ft_len; /* length of flat device tree */ 373 374 ulong initrd_start; 375 ulong initrd_end; 376 ulong cmdline_start; 377 ulong cmdline_end; 378 bd_t *kbd; 379 #endif 380 381 int verify; /* env_get("verify")[0] != 'n' */ 382 383 #define BOOTM_STATE_START (0x00000001) 384 #define BOOTM_STATE_FINDOS (0x00000002) 385 #define BOOTM_STATE_FINDOTHER (0x00000004) 386 #define BOOTM_STATE_LOADOS (0x00000008) 387 #define BOOTM_STATE_RAMDISK (0x00000010) 388 #define BOOTM_STATE_FDT (0x00000020) 389 #define BOOTM_STATE_OS_CMDLINE (0x00000040) 390 #define BOOTM_STATE_OS_BD_T (0x00000080) 391 #define BOOTM_STATE_OS_PREP (0x00000100) 392 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */ 393 #define BOOTM_STATE_OS_GO (0x00000400) 394 int state; 395 396 #ifdef CONFIG_LMB 397 struct lmb lmb; /* for memory mgmt */ 398 #endif 399 } bootm_headers_t; 400 401 extern bootm_headers_t images; 402 403 /* 404 * Some systems (for example LWMON) have very short watchdog periods; 405 * we must make sure to split long operations like memmove() or 406 * checksum calculations into reasonable chunks. 407 */ 408 #ifndef CHUNKSZ 409 #define CHUNKSZ (64 * 1024) 410 #endif 411 412 #ifndef CHUNKSZ_CRC32 413 #define CHUNKSZ_CRC32 (64 * 1024) 414 #endif 415 416 #ifndef CHUNKSZ_MD5 417 #define CHUNKSZ_MD5 (64 * 1024) 418 #endif 419 420 #ifndef CHUNKSZ_SHA1 421 #define CHUNKSZ_SHA1 (64 * 1024) 422 #endif 423 424 #define uimage_to_cpu(x) be32_to_cpu(x) 425 #define cpu_to_uimage(x) cpu_to_be32(x) 426 427 /* 428 * Translation table for entries of a specific type; used by 429 * get_table_entry_id() and get_table_entry_name(). 430 */ 431 typedef struct table_entry { 432 int id; 433 char *sname; /* short (input) name to find table entry */ 434 char *lname; /* long (output) name to print for messages */ 435 } table_entry_t; 436 437 /* 438 * get_table_entry_id() scans the translation table trying to find an 439 * entry that matches the given short name. If a matching entry is 440 * found, it's id is returned to the caller. 441 */ 442 int get_table_entry_id(const table_entry_t *table, 443 const char *table_name, const char *name); 444 /* 445 * get_table_entry_name() scans the translation table trying to find 446 * an entry that matches the given id. If a matching entry is found, 447 * its long name is returned to the caller. 448 */ 449 char *get_table_entry_name(const table_entry_t *table, char *msg, int id); 450 451 const char *genimg_get_os_name(uint8_t os); 452 453 /** 454 * genimg_get_os_short_name() - get the short name for an OS 455 * 456 * @param os OS (IH_OS_...) 457 * @return OS short name, or "unknown" if unknown 458 */ 459 const char *genimg_get_os_short_name(uint8_t comp); 460 461 const char *genimg_get_arch_name(uint8_t arch); 462 463 /** 464 * genimg_get_arch_short_name() - get the short name for an architecture 465 * 466 * @param arch Architecture type (IH_ARCH_...) 467 * @return architecture short name, or "unknown" if unknown 468 */ 469 const char *genimg_get_arch_short_name(uint8_t arch); 470 471 const char *genimg_get_type_name(uint8_t type); 472 473 /** 474 * genimg_get_type_short_name() - get the short name for an image type 475 * 476 * @param type Image type (IH_TYPE_...) 477 * @return image short name, or "unknown" if unknown 478 */ 479 const char *genimg_get_type_short_name(uint8_t type); 480 481 const char *genimg_get_comp_name(uint8_t comp); 482 483 /** 484 * genimg_get_comp_short_name() - get the short name for a compression method 485 * 486 * @param comp compression method (IH_COMP_...) 487 * @return compression method short name, or "unknown" if unknown 488 */ 489 const char *genimg_get_comp_short_name(uint8_t comp); 490 491 /** 492 * genimg_get_cat_name() - Get the name of an item in a category 493 * 494 * @category: Category of item 495 * @id: Item ID 496 * @return name of item, or "Unknown ..." if unknown 497 */ 498 const char *genimg_get_cat_name(enum ih_category category, uint id); 499 500 /** 501 * genimg_get_cat_short_name() - Get the short name of an item in a category 502 * 503 * @category: Category of item 504 * @id: Item ID 505 * @return short name of item, or "Unknown ..." if unknown 506 */ 507 const char *genimg_get_cat_short_name(enum ih_category category, uint id); 508 509 /** 510 * genimg_get_cat_count() - Get the number of items in a category 511 * 512 * @category: Category to check 513 * @return the number of items in the category (IH_xxx_COUNT) 514 */ 515 int genimg_get_cat_count(enum ih_category category); 516 517 /** 518 * genimg_get_cat_desc() - Get the description of a category 519 * 520 * @return the description of a category, e.g. "architecture". This 521 * effectively converts the enum to a string. 522 */ 523 const char *genimg_get_cat_desc(enum ih_category category); 524 525 int genimg_get_os_id(const char *name); 526 int genimg_get_arch_id(const char *name); 527 int genimg_get_type_id(const char *name); 528 int genimg_get_comp_id(const char *name); 529 void genimg_print_size(uint32_t size); 530 531 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ 532 defined(USE_HOSTCC) 533 #define IMAGE_ENABLE_TIMESTAMP 1 534 #else 535 #define IMAGE_ENABLE_TIMESTAMP 0 536 #endif 537 void genimg_print_time(time_t timestamp); 538 539 /* What to do with a image load address ('load = <> 'in the FIT) */ 540 enum fit_load_op { 541 FIT_LOAD_IGNORED, /* Ignore load address */ 542 FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ 543 FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */ 544 FIT_LOAD_REQUIRED, /* Must be provided */ 545 }; 546 547 int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start, 548 ulong *setup_len); 549 550 #ifndef USE_HOSTCC 551 /* Image format types, returned by _get_format() routine */ 552 #define IMAGE_FORMAT_INVALID 0x00 553 #if defined(CONFIG_IMAGE_FORMAT_LEGACY) 554 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ 555 #endif 556 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ 557 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */ 558 559 ulong genimg_get_kernel_addr_fit(char * const img_addr, 560 const char **fit_uname_config, 561 const char **fit_uname_kernel); 562 ulong genimg_get_kernel_addr(char * const img_addr); 563 int genimg_get_format(const void *img_addr); 564 int genimg_has_config(bootm_headers_t *images); 565 566 int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images, 567 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 568 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, 569 uint8_t arch, ulong *rd_start, ulong *rd_end); 570 571 /** 572 * boot_get_loadable - routine to load a list of binaries to memory 573 * @argc: Ignored Argument 574 * @argv: Ignored Argument 575 * @images: pointer to the bootm images structure 576 * @arch: expected architecture for the image 577 * @ld_start: Ignored Argument 578 * @ld_len: Ignored Argument 579 * 580 * boot_get_loadable() will take the given FIT configuration, and look 581 * for a field named "loadables". Loadables, is a list of elements in 582 * the FIT given as strings. exe: 583 * loadables = "linux_kernel", "fdt-2"; 584 * this function will attempt to parse each string, and load the 585 * corresponding element from the FIT into memory. Once placed, 586 * no aditional actions are taken. 587 * 588 * @return: 589 * 0, if only valid images or no images are found 590 * error code, if an error occurs during fit_image_load 591 */ 592 int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, 593 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 594 #endif /* !USE_HOSTCC */ 595 596 int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, 597 ulong *setup_start, ulong *setup_len); 598 599 /** 600 * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays) 601 * 602 * This deals with all aspects of loading an DTB from a FIT. 603 * The correct base image based on configuration will be selected, and 604 * then any overlays specified will be applied (as present in fit_uname_configp). 605 * 606 * @param images Boot images structure 607 * @param addr Address of FIT in memory 608 * @param fit_unamep On entry this is the requested image name 609 * (e.g. "kernel") or NULL to use the default. On exit 610 * points to the selected image name 611 * @param fit_uname_configp On entry this is the requested configuration 612 * name (e.g. "conf-1") or NULL to use the default. On 613 * exit points to the selected configuration name. 614 * @param arch Expected architecture (IH_ARCH_...) 615 * @param datap Returns address of loaded image 616 * @param lenp Returns length of loaded image 617 * 618 * @return node offset of base image, or -ve error code on error 619 */ 620 int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, 621 const char **fit_unamep, const char **fit_uname_configp, 622 int arch, ulong *datap, ulong *lenp); 623 624 /** 625 * fit_image_load() - load an image from a FIT 626 * 627 * This deals with all aspects of loading an image from a FIT, including 628 * selecting the right image based on configuration, verifying it, printing 629 * out progress messages, checking the type/arch/os and optionally copying it 630 * to the right load address. 631 * 632 * The property to look up is defined by image_type. 633 * 634 * @param images Boot images structure 635 * @param addr Address of FIT in memory 636 * @param fit_unamep On entry this is the requested image name 637 * (e.g. "kernel") or NULL to use the default. On exit 638 * points to the selected image name 639 * @param fit_uname_configp On entry this is the requested configuration 640 * name (e.g. "conf-1") or NULL to use the default. On 641 * exit points to the selected configuration name. 642 * @param arch Expected architecture (IH_ARCH_...) 643 * @param image_type Required image type (IH_TYPE_...). If this is 644 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD 645 * also. 646 * @param bootstage_id ID of starting bootstage to use for progress updates. 647 * This will be added to the BOOTSTAGE_SUB values when 648 * calling bootstage_mark() 649 * @param load_op Decribes what to do with the load address 650 * @param datap Returns address of loaded image 651 * @param lenp Returns length of loaded image 652 * @return node offset of image, or -ve error code on error 653 */ 654 int fit_image_load(bootm_headers_t *images, ulong addr, 655 const char **fit_unamep, const char **fit_uname_configp, 656 int arch, int image_type, int bootstage_id, 657 enum fit_load_op load_op, ulong *datap, ulong *lenp); 658 659 #ifndef USE_HOSTCC 660 /** 661 * fit_get_node_from_config() - Look up an image a FIT by type 662 * 663 * This looks in the selected conf- node (images->fit_uname_cfg) for a 664 * particular image type (e.g. "kernel") and then finds the image that is 665 * referred to. 666 * 667 * For example, for something like: 668 * 669 * images { 670 * kernel { 671 * ... 672 * }; 673 * }; 674 * configurations { 675 * conf-1 { 676 * kernel = "kernel"; 677 * }; 678 * }; 679 * 680 * the function will return the node offset of the kernel@1 node, assuming 681 * that conf-1 is the chosen configuration. 682 * 683 * @param images Boot images structure 684 * @param prop_name Property name to look up (FIT_..._PROP) 685 * @param addr Address of FIT in memory 686 */ 687 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, 688 ulong addr); 689 690 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, 691 bootm_headers_t *images, 692 char **of_flat_tree, ulong *of_size); 693 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); 694 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); 695 696 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, 697 ulong *initrd_start, ulong *initrd_end); 698 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); 699 #ifdef CONFIG_SYS_BOOT_GET_KBD 700 int boot_get_kbd(struct lmb *lmb, bd_t **kbd); 701 #endif /* CONFIG_SYS_BOOT_GET_KBD */ 702 #endif /* !USE_HOSTCC */ 703 704 /*******************************************************************/ 705 /* Legacy format specific code (prefixed with image_) */ 706 /*******************************************************************/ 707 static inline uint32_t image_get_header_size(void) 708 { 709 return (sizeof(image_header_t)); 710 } 711 712 #define image_get_hdr_l(f) \ 713 static inline uint32_t image_get_##f(const image_header_t *hdr) \ 714 { \ 715 return uimage_to_cpu(hdr->ih_##f); \ 716 } 717 image_get_hdr_l(magic) /* image_get_magic */ 718 image_get_hdr_l(hcrc) /* image_get_hcrc */ 719 image_get_hdr_l(time) /* image_get_time */ 720 image_get_hdr_l(size) /* image_get_size */ 721 image_get_hdr_l(load) /* image_get_load */ 722 image_get_hdr_l(ep) /* image_get_ep */ 723 image_get_hdr_l(dcrc) /* image_get_dcrc */ 724 725 #define image_get_hdr_b(f) \ 726 static inline uint8_t image_get_##f(const image_header_t *hdr) \ 727 { \ 728 return hdr->ih_##f; \ 729 } 730 image_get_hdr_b(os) /* image_get_os */ 731 image_get_hdr_b(arch) /* image_get_arch */ 732 image_get_hdr_b(type) /* image_get_type */ 733 image_get_hdr_b(comp) /* image_get_comp */ 734 735 static inline char *image_get_name(const image_header_t *hdr) 736 { 737 return (char *)hdr->ih_name; 738 } 739 740 static inline uint32_t image_get_data_size(const image_header_t *hdr) 741 { 742 return image_get_size(hdr); 743 } 744 745 /** 746 * image_get_data - get image payload start address 747 * @hdr: image header 748 * 749 * image_get_data() returns address of the image payload. For single 750 * component images it is image data start. For multi component 751 * images it points to the null terminated table of sub-images sizes. 752 * 753 * returns: 754 * image payload data start address 755 */ 756 static inline ulong image_get_data(const image_header_t *hdr) 757 { 758 return ((ulong)hdr + image_get_header_size()); 759 } 760 761 static inline uint32_t image_get_image_size(const image_header_t *hdr) 762 { 763 return (image_get_size(hdr) + image_get_header_size()); 764 } 765 static inline ulong image_get_image_end(const image_header_t *hdr) 766 { 767 return ((ulong)hdr + image_get_image_size(hdr)); 768 } 769 770 #define image_set_hdr_l(f) \ 771 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \ 772 { \ 773 hdr->ih_##f = cpu_to_uimage(val); \ 774 } 775 image_set_hdr_l(magic) /* image_set_magic */ 776 image_set_hdr_l(hcrc) /* image_set_hcrc */ 777 image_set_hdr_l(time) /* image_set_time */ 778 image_set_hdr_l(size) /* image_set_size */ 779 image_set_hdr_l(load) /* image_set_load */ 780 image_set_hdr_l(ep) /* image_set_ep */ 781 image_set_hdr_l(dcrc) /* image_set_dcrc */ 782 783 #define image_set_hdr_b(f) \ 784 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \ 785 { \ 786 hdr->ih_##f = val; \ 787 } 788 image_set_hdr_b(os) /* image_set_os */ 789 image_set_hdr_b(arch) /* image_set_arch */ 790 image_set_hdr_b(type) /* image_set_type */ 791 image_set_hdr_b(comp) /* image_set_comp */ 792 793 static inline void image_set_name(image_header_t *hdr, const char *name) 794 { 795 strncpy(image_get_name(hdr), name, IH_NMLEN); 796 } 797 798 int image_check_hcrc(const image_header_t *hdr); 799 int image_check_dcrc(const image_header_t *hdr); 800 #ifndef USE_HOSTCC 801 ulong env_get_bootm_low(void); 802 phys_size_t env_get_bootm_size(void); 803 phys_size_t env_get_bootm_mapsize(void); 804 #endif 805 void memmove_wd(void *to, void *from, size_t len, ulong chunksz); 806 807 static inline int image_check_magic(const image_header_t *hdr) 808 { 809 return (image_get_magic(hdr) == IH_MAGIC); 810 } 811 static inline int image_check_type(const image_header_t *hdr, uint8_t type) 812 { 813 return (image_get_type(hdr) == type); 814 } 815 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch) 816 { 817 return (image_get_arch(hdr) == arch) || 818 (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64); 819 } 820 static inline int image_check_os(const image_header_t *hdr, uint8_t os) 821 { 822 return (image_get_os(hdr) == os); 823 } 824 825 ulong image_multi_count(const image_header_t *hdr); 826 void image_multi_getimg(const image_header_t *hdr, ulong idx, 827 ulong *data, ulong *len); 828 829 void image_print_contents(const void *hdr); 830 831 #ifndef USE_HOSTCC 832 static inline int image_check_target_arch(const image_header_t *hdr) 833 { 834 #ifndef IH_ARCH_DEFAULT 835 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" 836 #endif 837 return image_check_arch(hdr, IH_ARCH_DEFAULT); 838 } 839 #endif /* USE_HOSTCC */ 840 841 /** 842 * Set up properties in the FDT 843 * 844 * This sets up properties in the FDT that is to be passed to linux. 845 * 846 * @images: Images information 847 * @blob: FDT to update 848 * @of_size: Size of the FDT 849 * @lmb: Points to logical memory block structure 850 * @return 0 if ok, <0 on failure 851 */ 852 int image_setup_libfdt(bootm_headers_t *images, void *blob, 853 int of_size, struct lmb *lmb); 854 855 /** 856 * Set up the FDT to use for booting a kernel 857 * 858 * This performs ramdisk setup, sets up the FDT if required, and adds 859 * paramters to the FDT if libfdt is available. 860 * 861 * @param images Images information 862 * @return 0 if ok, <0 on failure 863 */ 864 int image_setup_linux(bootm_headers_t *images); 865 866 /** 867 * bootz_setup() - Extract stat and size of a Linux xImage 868 * 869 * @image: Address of image 870 * @start: Returns start address of image 871 * @end : Returns end address of image 872 * @return 0 if OK, 1 if the image was not recognised 873 */ 874 int bootz_setup(ulong image, ulong *start, ulong *end); 875 876 /** 877 * Return the correct start address and size of a Linux aarch64 Image. 878 * 879 * @image: Address of image 880 * @start: Returns start address of image 881 * @size : Returns size image 882 * @return 0 if OK, 1 if the image was not recognised 883 */ 884 int booti_setup(ulong image, ulong *relocated_addr, ulong *size); 885 886 /*******************************************************************/ 887 /* New uImage format specific code (prefixed with fit_) */ 888 /*******************************************************************/ 889 890 #define FIT_IMAGES_PATH "/images" 891 #define FIT_CONFS_PATH "/configurations" 892 893 /* hash/signature node */ 894 #define FIT_HASH_NODENAME "hash" 895 #define FIT_ALGO_PROP "algo" 896 #define FIT_VALUE_PROP "value" 897 #define FIT_IGNORE_PROP "uboot-ignore" 898 #define FIT_SIG_NODENAME "signature" 899 900 /* image node */ 901 #define FIT_DATA_PROP "data" 902 #define FIT_DATA_POSITION_PROP "data-position" 903 #define FIT_DATA_OFFSET_PROP "data-offset" 904 #define FIT_DATA_SIZE_PROP "data-size" 905 #define FIT_TIMESTAMP_PROP "timestamp" 906 #define FIT_DESC_PROP "description" 907 #define FIT_ARCH_PROP "arch" 908 #define FIT_TYPE_PROP "type" 909 #define FIT_OS_PROP "os" 910 #define FIT_COMP_PROP "compression" 911 #define FIT_ENTRY_PROP "entry" 912 #define FIT_LOAD_PROP "load" 913 914 /* configuration node */ 915 #define FIT_KERNEL_PROP "kernel" 916 #define FIT_RAMDISK_PROP "ramdisk" 917 #define FIT_FDT_PROP "fdt" 918 #define FIT_LOADABLE_PROP "loadables" 919 #define FIT_DEFAULT_PROP "default" 920 #define FIT_SETUP_PROP "setup" 921 #define FIT_FPGA_PROP "fpga" 922 923 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE 924 925 #if IMAGE_ENABLE_FIT 926 /* cmdline argument format parsing */ 927 int fit_parse_conf(const char *spec, ulong addr_curr, 928 ulong *addr, const char **conf_name); 929 int fit_parse_subimage(const char *spec, ulong addr_curr, 930 ulong *addr, const char **image_name); 931 932 int fit_get_subimage_count(const void *fit, int images_noffset); 933 void fit_print_contents(const void *fit); 934 void fit_image_print(const void *fit, int noffset, const char *p); 935 936 /** 937 * fit_get_end - get FIT image size 938 * @fit: pointer to the FIT format image header 939 * 940 * returns: 941 * size of the FIT image (blob) in memory 942 */ 943 static inline ulong fit_get_size(const void *fit) 944 { 945 return fdt_totalsize(fit); 946 } 947 948 /** 949 * fit_get_end - get FIT image end 950 * @fit: pointer to the FIT format image header 951 * 952 * returns: 953 * end address of the FIT image (blob) in memory 954 */ 955 ulong fit_get_end(const void *fit); 956 957 /** 958 * fit_get_name - get FIT node name 959 * @fit: pointer to the FIT format image header 960 * 961 * returns: 962 * NULL, on error 963 * pointer to node name, on success 964 */ 965 static inline const char *fit_get_name(const void *fit_hdr, 966 int noffset, int *len) 967 { 968 return fdt_get_name(fit_hdr, noffset, len); 969 } 970 971 int fit_get_desc(const void *fit, int noffset, char **desc); 972 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp); 973 974 int fit_image_get_node(const void *fit, const char *image_uname); 975 int fit_image_get_os(const void *fit, int noffset, uint8_t *os); 976 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch); 977 int fit_image_get_type(const void *fit, int noffset, uint8_t *type); 978 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp); 979 int fit_image_get_load(const void *fit, int noffset, ulong *load); 980 int fit_image_get_entry(const void *fit, int noffset, ulong *entry); 981 int fit_image_get_data(const void *fit, int noffset, 982 const void **data, size_t *size); 983 int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset); 984 int fit_image_get_data_position(const void *fit, int noffset, 985 int *data_position); 986 int fit_image_get_data_size(const void *fit, int noffset, int *data_size); 987 988 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); 989 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, 990 int *value_len); 991 992 int fit_set_timestamp(void *fit, int noffset, time_t timestamp); 993 994 /** 995 * fit_add_verification_data() - add verification data to FIT image nodes 996 * 997 * @keydir: Directory containing keys 998 * @kwydest: FDT blob to write public key information to 999 * @fit: Pointer to the FIT format image header 1000 * @comment: Comment to add to signature nodes 1001 * @require_keys: Mark all keys as 'required' 1002 * @engine_id: Engine to use for signing 1003 * 1004 * Adds hash values for all component images in the FIT blob. 1005 * Hashes are calculated for all component images which have hash subnodes 1006 * with algorithm property set to one of the supported hash algorithms. 1007 * 1008 * Also add signatures if signature nodes are present. 1009 * 1010 * returns 1011 * 0, on success 1012 * libfdt error code, on failure 1013 */ 1014 int fit_add_verification_data(const char *keydir, void *keydest, void *fit, 1015 const char *comment, int require_keys, 1016 const char *engine_id); 1017 1018 int fit_image_verify_with_data(const void *fit, int image_noffset, 1019 const void *data, size_t size); 1020 int fit_image_verify(const void *fit, int noffset); 1021 int fit_config_verify(const void *fit, int conf_noffset); 1022 int fit_all_image_verify(const void *fit); 1023 int fit_image_check_os(const void *fit, int noffset, uint8_t os); 1024 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); 1025 int fit_image_check_type(const void *fit, int noffset, uint8_t type); 1026 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp); 1027 int fit_check_format(const void *fit); 1028 1029 int fit_conf_find_compat(const void *fit, const void *fdt); 1030 int fit_conf_get_node(const void *fit, const char *conf_uname); 1031 1032 /** 1033 * fit_conf_get_prop_node() - Get node refered to by a configuration 1034 * @fit: FIT to check 1035 * @noffset: Offset of conf@xxx node to check 1036 * @prop_name: Property to read from the conf node 1037 * 1038 * The conf- nodes contain references to other nodes, using properties 1039 * like 'kernel = "kernel"'. Given such a property name (e.g. "kernel"), 1040 * return the offset of the node referred to (e.g. offset of node 1041 * "/images/kernel". 1042 */ 1043 int fit_conf_get_prop_node(const void *fit, int noffset, 1044 const char *prop_name); 1045 1046 void fit_conf_print(const void *fit, int noffset, const char *p); 1047 1048 int fit_check_ramdisk(const void *fit, int os_noffset, 1049 uint8_t arch, int verify); 1050 1051 int calculate_hash(const void *data, int data_len, const char *algo, 1052 uint8_t *value, int *value_len); 1053 1054 /* 1055 * At present we only support signing on the host, and verification on the 1056 * device 1057 */ 1058 #if defined(CONFIG_FIT_SIGNATURE) 1059 # ifdef USE_HOSTCC 1060 # define IMAGE_ENABLE_SIGN 1 1061 # define IMAGE_ENABLE_VERIFY 1 1062 # include <openssl/evp.h> 1063 #else 1064 # define IMAGE_ENABLE_SIGN 0 1065 # define IMAGE_ENABLE_VERIFY 1 1066 # endif 1067 #else 1068 # define IMAGE_ENABLE_SIGN 0 1069 # define IMAGE_ENABLE_VERIFY 0 1070 #endif 1071 1072 #ifdef USE_HOSTCC 1073 void *image_get_host_blob(void); 1074 void image_set_host_blob(void *host_blob); 1075 # define gd_fdt_blob() image_get_host_blob() 1076 #else 1077 # define gd_fdt_blob() (gd->fdt_blob) 1078 #endif 1079 1080 #ifdef CONFIG_FIT_BEST_MATCH 1081 #define IMAGE_ENABLE_BEST_MATCH 1 1082 #else 1083 #define IMAGE_ENABLE_BEST_MATCH 0 1084 #endif 1085 1086 /* Information passed to the signing routines */ 1087 struct image_sign_info { 1088 const char *keydir; /* Directory conaining keys */ 1089 const char *keyname; /* Name of key to use */ 1090 void *fit; /* Pointer to FIT blob */ 1091 int node_offset; /* Offset of signature node */ 1092 const char *name; /* Algorithm name */ 1093 struct checksum_algo *checksum; /* Checksum algorithm information */ 1094 struct crypto_algo *crypto; /* Crypto algorithm information */ 1095 const void *fdt_blob; /* FDT containing public keys */ 1096 int required_keynode; /* Node offset of key to use: -1=any */ 1097 const char *require_keys; /* Value for 'required' property */ 1098 const char *engine_id; /* Engine to use for signing */ 1099 }; 1100 #endif /* Allow struct image_region to always be defined for rsa.h */ 1101 1102 /* A part of an image, used for hashing */ 1103 struct image_region { 1104 const void *data; 1105 int size; 1106 }; 1107 1108 #if IMAGE_ENABLE_FIT 1109 1110 #if IMAGE_ENABLE_VERIFY 1111 # include <u-boot/rsa-checksum.h> 1112 #endif 1113 struct checksum_algo { 1114 const char *name; 1115 const int checksum_len; 1116 const int der_len; 1117 const uint8_t *der_prefix; 1118 #if IMAGE_ENABLE_SIGN 1119 const EVP_MD *(*calculate_sign)(void); 1120 #endif 1121 int (*calculate)(const char *name, 1122 const struct image_region region[], 1123 int region_count, uint8_t *checksum); 1124 }; 1125 1126 struct crypto_algo { 1127 const char *name; /* Name of algorithm */ 1128 const int key_len; 1129 1130 /** 1131 * sign() - calculate and return signature for given input data 1132 * 1133 * @info: Specifies key and FIT information 1134 * @data: Pointer to the input data 1135 * @data_len: Data length 1136 * @sigp: Set to an allocated buffer holding the signature 1137 * @sig_len: Set to length of the calculated hash 1138 * 1139 * This computes input data signature according to selected algorithm. 1140 * Resulting signature value is placed in an allocated buffer, the 1141 * pointer is returned as *sigp. The length of the calculated 1142 * signature is returned via the sig_len pointer argument. The caller 1143 * should free *sigp. 1144 * 1145 * @return: 0, on success, -ve on error 1146 */ 1147 int (*sign)(struct image_sign_info *info, 1148 const struct image_region region[], 1149 int region_count, uint8_t **sigp, uint *sig_len); 1150 1151 /** 1152 * add_verify_data() - Add verification information to FDT 1153 * 1154 * Add public key information to the FDT node, suitable for 1155 * verification at run-time. The information added depends on the 1156 * algorithm being used. 1157 * 1158 * @info: Specifies key and FIT information 1159 * @keydest: Destination FDT blob for public key data 1160 * @return: 0, on success, -ve on error 1161 */ 1162 int (*add_verify_data)(struct image_sign_info *info, void *keydest); 1163 1164 /** 1165 * verify() - Verify a signature against some data 1166 * 1167 * @info: Specifies key and FIT information 1168 * @data: Pointer to the input data 1169 * @data_len: Data length 1170 * @sig: Signature 1171 * @sig_len: Number of bytes in signature 1172 * @return 0 if verified, -ve on error 1173 */ 1174 int (*verify)(struct image_sign_info *info, 1175 const struct image_region region[], int region_count, 1176 uint8_t *sig, uint sig_len); 1177 }; 1178 1179 /** 1180 * image_get_checksum_algo() - Look up a checksum algorithm 1181 * 1182 * @param full_name Name of algorithm in the form "checksum,crypto" 1183 * @return pointer to algorithm information, or NULL if not found 1184 */ 1185 struct checksum_algo *image_get_checksum_algo(const char *full_name); 1186 1187 /** 1188 * image_get_crypto_algo() - Look up a cryptosystem algorithm 1189 * 1190 * @param full_name Name of algorithm in the form "checksum,crypto" 1191 * @return pointer to algorithm information, or NULL if not found 1192 */ 1193 struct crypto_algo *image_get_crypto_algo(const char *full_name); 1194 1195 /** 1196 * fit_image_verify_required_sigs() - Verify signatures marked as 'required' 1197 * 1198 * @fit: FIT to check 1199 * @image_noffset: Offset of image node to check 1200 * @data: Image data to check 1201 * @size: Size of image data 1202 * @sig_blob: FDT containing public keys 1203 * @no_sigsp: Returns 1 if no signatures were required, and 1204 * therefore nothing was checked. The caller may wish 1205 * to fall back to other mechanisms, or refuse to 1206 * boot. 1207 * @return 0 if all verified ok, <0 on error 1208 */ 1209 int fit_image_verify_required_sigs(const void *fit, int image_noffset, 1210 const char *data, size_t size, const void *sig_blob, 1211 int *no_sigsp); 1212 1213 /** 1214 * fit_image_check_sig() - Check a single image signature node 1215 * 1216 * @fit: FIT to check 1217 * @noffset: Offset of signature node to check 1218 * @data: Image data to check 1219 * @size: Size of image data 1220 * @required_keynode: Offset in the control FDT of the required key node, 1221 * if any. If this is given, then the image wil not 1222 * pass verification unless that key is used. If this is 1223 * -1 then any signature will do. 1224 * @err_msgp: In the event of an error, this will be pointed to a 1225 * help error string to display to the user. 1226 * @return 0 if all verified ok, <0 on error 1227 */ 1228 int fit_image_check_sig(const void *fit, int noffset, const void *data, 1229 size_t size, int required_keynode, char **err_msgp); 1230 1231 /** 1232 * fit_region_make_list() - Make a list of regions to hash 1233 * 1234 * Given a list of FIT regions (offset, size) provided by libfdt, create 1235 * a list of regions (void *, size) for use by the signature creationg 1236 * and verification code. 1237 * 1238 * @fit: FIT image to process 1239 * @fdt_regions: Regions as returned by libfdt 1240 * @count: Number of regions returned by libfdt 1241 * @region: Place to put list of regions (NULL to allocate it) 1242 * @return pointer to list of regions, or NULL if out of memory 1243 */ 1244 struct image_region *fit_region_make_list(const void *fit, 1245 struct fdt_region *fdt_regions, int count, 1246 struct image_region *region); 1247 1248 static inline int fit_image_check_target_arch(const void *fdt, int node) 1249 { 1250 #ifndef USE_HOSTCC 1251 return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); 1252 #else 1253 return 0; 1254 #endif 1255 } 1256 1257 #ifdef CONFIG_FIT_VERBOSE 1258 #define fit_unsupported(msg) printf("! %s:%d " \ 1259 "FIT images not supported for '%s'\n", \ 1260 __FILE__, __LINE__, (msg)) 1261 1262 #define fit_unsupported_reset(msg) printf("! %s:%d " \ 1263 "FIT images not supported for '%s' " \ 1264 "- must reset board to recover!\n", \ 1265 __FILE__, __LINE__, (msg)) 1266 #else 1267 #define fit_unsupported(msg) 1268 #define fit_unsupported_reset(msg) 1269 #endif /* CONFIG_FIT_VERBOSE */ 1270 #endif /* CONFIG_FIT */ 1271 1272 #if defined(CONFIG_ANDROID_BOOT_IMAGE) 1273 struct andr_img_hdr; 1274 int android_image_check_header(const struct andr_img_hdr *hdr); 1275 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, 1276 ulong *os_data, ulong *os_len); 1277 int android_image_get_ramdisk(const struct andr_img_hdr *hdr, 1278 ulong *rd_data, ulong *rd_len); 1279 int android_image_get_second(const struct andr_img_hdr *hdr, 1280 ulong *second_data, ulong *second_len); 1281 ulong android_image_get_end(const struct andr_img_hdr *hdr); 1282 ulong android_image_get_kload(const struct andr_img_hdr *hdr); 1283 void android_print_contents(const struct andr_img_hdr *hdr); 1284 1285 #endif /* CONFIG_ANDROID_BOOT_IMAGE */ 1286 1287 /** 1288 * board_fit_config_name_match() - Check for a matching board name 1289 * 1290 * This is used when SPL loads a FIT containing multiple device tree files 1291 * and wants to work out which one to use. The description of each one is 1292 * passed to this function. The description comes from the 'description' field 1293 * in each (FDT) image node. 1294 * 1295 * @name: Device tree description 1296 * @return 0 if this device tree should be used, non-zero to try the next 1297 */ 1298 int board_fit_config_name_match(const char *name); 1299 1300 #if defined(CONFIG_SPL_FIT_IMAGE_POST_PROCESS) || \ 1301 defined(CONFIG_FIT_IMAGE_POST_PROCESS) 1302 /** 1303 * board_fit_image_post_process() - Do any post-process on FIT binary data 1304 * 1305 * This is used to do any sort of image manipulation, verification, decryption 1306 * etc. in a platform or board specific way. Obviously, anything done here would 1307 * need to be comprehended in how the images were prepared before being injected 1308 * into the FIT creation (i.e. the binary blobs would have been pre-processed 1309 * before being added to the FIT image). 1310 * 1311 * @image: pointer to the image start pointer 1312 * @size: pointer to the image size 1313 * @return no return value (failure should be handled internally) 1314 */ 1315 void board_fit_image_post_process(void **p_image, size_t *p_size); 1316 #endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */ 1317 1318 #define FDT_ERROR ((ulong)(-1)) 1319 1320 ulong fdt_getprop_u32(const void *fdt, int node, const char *prop); 1321 1322 /** 1323 * fit_find_config_node() - Find the node for the best DTB in a FIT image 1324 * 1325 * A FIT image contains one or more DTBs. This function parses the 1326 * configurations described in the FIT images and returns the node of 1327 * the first matching DTB. To check if a DTB matches a board, this function 1328 * calls board_fit_config_name_match(). If no matching DTB is found, it returns 1329 * the node described by the default configuration if it exists. 1330 * 1331 * @fdt: pointer to flat device tree 1332 * @return the node if found, -ve otherwise 1333 */ 1334 int fit_find_config_node(const void *fdt); 1335 1336 /** 1337 * Mapping of image types to function handlers to be invoked on the associated 1338 * loaded images 1339 * 1340 * @type: Type of image, I.E. IH_TYPE_* 1341 * @handler: Function to call on loaded image 1342 */ 1343 struct fit_loadable_tbl { 1344 int type; 1345 /** 1346 * handler() - Process a loaded image 1347 * 1348 * @data: Pointer to start of loaded image data 1349 * @size: Size of loaded image data 1350 */ 1351 void (*handler)(ulong data, size_t size); 1352 }; 1353 1354 /* 1355 * Define a FIT loadable image type handler 1356 * 1357 * _type is a valid uimage_type ID as defined in the "Image Type" enum above 1358 * _handler is the handler function to call after this image type is loaded 1359 */ 1360 #define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \ 1361 ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \ 1362 .type = _type, \ 1363 .handler = _handler, \ 1364 } 1365 1366 #endif /* __IMAGE_H__ */ 1367