1 /* 2 * (C) Copyright 2008 Semihalf 3 * 4 * (C) Copyright 2000-2005 5 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 ******************************************************************** 9 * NOTE: This header file defines an interface to U-Boot. Including 10 * this (unmodified) header file in another file is considered normal 11 * use of U-Boot, and does *not* fall under the heading of "derived 12 * work". 13 ******************************************************************** 14 */ 15 16 #ifndef __IMAGE_H__ 17 #define __IMAGE_H__ 18 19 #include "compiler.h" 20 #include <asm/byteorder.h> 21 22 /* Define this to avoid #ifdefs later on */ 23 struct lmb; 24 25 #ifdef USE_HOSTCC 26 #include <sys/types.h> 27 28 /* new uImage format support enabled on host */ 29 #define IMAGE_ENABLE_FIT 1 30 #define IMAGE_ENABLE_OF_LIBFDT 1 31 #define CONFIG_FIT_VERBOSE 1 /* enable fit_format_{error,warning}() */ 32 #define CONFIG_FIT_ENABLE_SHA256_SUPPORT 33 #define CONFIG_SHA1 34 #define CONFIG_SHA256 35 36 #define IMAGE_ENABLE_IGNORE 0 37 #define IMAGE_INDENT_STRING "" 38 39 #else 40 41 #include <lmb.h> 42 #include <asm/u-boot.h> 43 #include <command.h> 44 45 /* Take notice of the 'ignore' property for hashes */ 46 #define IMAGE_ENABLE_IGNORE 1 47 #define IMAGE_INDENT_STRING " " 48 49 #define IMAGE_ENABLE_FIT CONFIG_IS_ENABLED(FIT) 50 #define IMAGE_ENABLE_OF_LIBFDT CONFIG_IS_ENABLED(OF_LIBFDT) 51 52 #endif /* USE_HOSTCC */ 53 54 #if IMAGE_ENABLE_FIT 55 #include <hash.h> 56 #include <libfdt.h> 57 #include <fdt_support.h> 58 # ifdef CONFIG_SPL_BUILD 59 # ifdef CONFIG_SPL_CRC32_SUPPORT 60 # define IMAGE_ENABLE_CRC32 1 61 # endif 62 # ifdef CONFIG_SPL_MD5_SUPPORT 63 # define IMAGE_ENABLE_MD5 1 64 # endif 65 # ifdef CONFIG_SPL_SHA1_SUPPORT 66 # define IMAGE_ENABLE_SHA1 1 67 # endif 68 # else 69 # define CONFIG_CRC32 /* FIT images need CRC32 support */ 70 # define IMAGE_ENABLE_CRC32 1 71 # define IMAGE_ENABLE_MD5 1 72 # define IMAGE_ENABLE_SHA1 1 73 # endif 74 75 #ifndef IMAGE_ENABLE_CRC32 76 #define IMAGE_ENABLE_CRC32 0 77 #endif 78 79 #ifndef IMAGE_ENABLE_MD5 80 #define IMAGE_ENABLE_MD5 0 81 #endif 82 83 #ifndef IMAGE_ENABLE_SHA1 84 #define IMAGE_ENABLE_SHA1 0 85 #endif 86 87 #if defined(CONFIG_FIT_ENABLE_SHA256_SUPPORT) || \ 88 defined(CONFIG_SPL_SHA256_SUPPORT) 89 #define IMAGE_ENABLE_SHA256 1 90 #else 91 #define IMAGE_ENABLE_SHA256 0 92 #endif 93 94 #endif /* IMAGE_ENABLE_FIT */ 95 96 #ifdef CONFIG_SYS_BOOT_GET_CMDLINE 97 # define IMAGE_BOOT_GET_CMDLINE 1 98 #else 99 # define IMAGE_BOOT_GET_CMDLINE 0 100 #endif 101 102 #ifdef CONFIG_OF_BOARD_SETUP 103 # define IMAGE_OF_BOARD_SETUP 1 104 #else 105 # define IMAGE_OF_BOARD_SETUP 0 106 #endif 107 108 #ifdef CONFIG_OF_SYSTEM_SETUP 109 # define IMAGE_OF_SYSTEM_SETUP 1 110 #else 111 # define IMAGE_OF_SYSTEM_SETUP 0 112 #endif 113 114 enum ih_category { 115 IH_ARCH, 116 IH_COMP, 117 IH_OS, 118 IH_TYPE, 119 120 IH_COUNT, 121 }; 122 123 /* 124 * Operating System Codes 125 * 126 * The following are exposed to uImage header. 127 * Do not change values for backward compatibility. 128 */ 129 enum { 130 IH_OS_INVALID = 0, /* Invalid OS */ 131 IH_OS_OPENBSD, /* OpenBSD */ 132 IH_OS_NETBSD, /* NetBSD */ 133 IH_OS_FREEBSD, /* FreeBSD */ 134 IH_OS_4_4BSD, /* 4.4BSD */ 135 IH_OS_LINUX, /* Linux */ 136 IH_OS_SVR4, /* SVR4 */ 137 IH_OS_ESIX, /* Esix */ 138 IH_OS_SOLARIS, /* Solaris */ 139 IH_OS_IRIX, /* Irix */ 140 IH_OS_SCO, /* SCO */ 141 IH_OS_DELL, /* Dell */ 142 IH_OS_NCR, /* NCR */ 143 IH_OS_LYNXOS, /* LynxOS */ 144 IH_OS_VXWORKS, /* VxWorks */ 145 IH_OS_PSOS, /* pSOS */ 146 IH_OS_QNX, /* QNX */ 147 IH_OS_U_BOOT, /* Firmware */ 148 IH_OS_RTEMS, /* RTEMS */ 149 IH_OS_ARTOS, /* ARTOS */ 150 IH_OS_UNITY, /* Unity OS */ 151 IH_OS_INTEGRITY, /* INTEGRITY */ 152 IH_OS_OSE, /* OSE */ 153 IH_OS_PLAN9, /* Plan 9 */ 154 IH_OS_OPENRTOS, /* OpenRTOS */ 155 156 IH_OS_COUNT, 157 }; 158 159 /* 160 * CPU Architecture Codes (supported by Linux) 161 * 162 * The following are exposed to uImage header. 163 * Do not change values for backward compatibility. 164 */ 165 enum { 166 IH_ARCH_INVALID = 0, /* Invalid CPU */ 167 IH_ARCH_ALPHA, /* Alpha */ 168 IH_ARCH_ARM, /* ARM */ 169 IH_ARCH_I386, /* Intel x86 */ 170 IH_ARCH_IA64, /* IA64 */ 171 IH_ARCH_MIPS, /* MIPS */ 172 IH_ARCH_MIPS64, /* MIPS 64 Bit */ 173 IH_ARCH_PPC, /* PowerPC */ 174 IH_ARCH_S390, /* IBM S390 */ 175 IH_ARCH_SH, /* SuperH */ 176 IH_ARCH_SPARC, /* Sparc */ 177 IH_ARCH_SPARC64, /* Sparc 64 Bit */ 178 IH_ARCH_M68K, /* M68K */ 179 IH_ARCH_NIOS, /* Nios-32 */ 180 IH_ARCH_MICROBLAZE, /* MicroBlaze */ 181 IH_ARCH_NIOS2, /* Nios-II */ 182 IH_ARCH_BLACKFIN, /* Blackfin */ 183 IH_ARCH_AVR32, /* AVR32 */ 184 IH_ARCH_ST200, /* STMicroelectronics ST200 */ 185 IH_ARCH_SANDBOX, /* Sandbox architecture (test only) */ 186 IH_ARCH_NDS32, /* ANDES Technology - NDS32 */ 187 IH_ARCH_OPENRISC, /* OpenRISC 1000 */ 188 IH_ARCH_ARM64, /* ARM64 */ 189 IH_ARCH_ARC, /* Synopsys DesignWare ARC */ 190 IH_ARCH_X86_64, /* AMD x86_64, Intel and Via */ 191 IH_ARCH_XTENSA, /* Xtensa */ 192 193 IH_ARCH_COUNT, 194 }; 195 196 /* 197 * Image Types 198 * 199 * "Standalone Programs" are directly runnable in the environment 200 * provided by U-Boot; it is expected that (if they behave 201 * well) you can continue to work in U-Boot after return from 202 * the Standalone Program. 203 * "OS Kernel Images" are usually images of some Embedded OS which 204 * will take over control completely. Usually these programs 205 * will install their own set of exception handlers, device 206 * drivers, set up the MMU, etc. - this means, that you cannot 207 * expect to re-enter U-Boot except by resetting the CPU. 208 * "RAMDisk Images" are more or less just data blocks, and their 209 * parameters (address, size) are passed to an OS kernel that is 210 * being started. 211 * "Multi-File Images" contain several images, typically an OS 212 * (Linux) kernel image and one or more data images like 213 * RAMDisks. This construct is useful for instance when you want 214 * to boot over the network using BOOTP etc., where the boot 215 * server provides just a single image file, but you want to get 216 * for instance an OS kernel and a RAMDisk image. 217 * 218 * "Multi-File Images" start with a list of image sizes, each 219 * image size (in bytes) specified by an "uint32_t" in network 220 * byte order. This list is terminated by an "(uint32_t)0". 221 * Immediately after the terminating 0 follow the images, one by 222 * one, all aligned on "uint32_t" boundaries (size rounded up to 223 * a multiple of 4 bytes - except for the last file). 224 * 225 * "Firmware Images" are binary images containing firmware (like 226 * U-Boot or FPGA images) which usually will be programmed to 227 * flash memory. 228 * 229 * "Script files" are command sequences that will be executed by 230 * U-Boot's command interpreter; this feature is especially 231 * useful when you configure U-Boot to use a real shell (hush) 232 * as command interpreter (=> Shell Scripts). 233 * 234 * The following are exposed to uImage header. 235 * Do not change values for backward compatibility. 236 */ 237 238 enum { 239 IH_TYPE_INVALID = 0, /* Invalid Image */ 240 IH_TYPE_STANDALONE, /* Standalone Program */ 241 IH_TYPE_KERNEL, /* OS Kernel Image */ 242 IH_TYPE_RAMDISK, /* RAMDisk Image */ 243 IH_TYPE_MULTI, /* Multi-File Image */ 244 IH_TYPE_FIRMWARE, /* Firmware Image */ 245 IH_TYPE_SCRIPT, /* Script file */ 246 IH_TYPE_FILESYSTEM, /* Filesystem Image (any type) */ 247 IH_TYPE_FLATDT, /* Binary Flat Device Tree Blob */ 248 IH_TYPE_KWBIMAGE, /* Kirkwood Boot Image */ 249 IH_TYPE_IMXIMAGE, /* Freescale IMXBoot Image */ 250 IH_TYPE_UBLIMAGE, /* Davinci UBL Image */ 251 IH_TYPE_OMAPIMAGE, /* TI OMAP Config Header Image */ 252 IH_TYPE_AISIMAGE, /* TI Davinci AIS Image */ 253 /* OS Kernel Image, can run from any load address */ 254 IH_TYPE_KERNEL_NOLOAD, 255 IH_TYPE_PBLIMAGE, /* Freescale PBL Boot Image */ 256 IH_TYPE_MXSIMAGE, /* Freescale MXSBoot Image */ 257 IH_TYPE_GPIMAGE, /* TI Keystone GPHeader Image */ 258 IH_TYPE_ATMELIMAGE, /* ATMEL ROM bootable Image */ 259 IH_TYPE_SOCFPGAIMAGE, /* Altera SOCFPGA Preloader */ 260 IH_TYPE_X86_SETUP, /* x86 setup.bin Image */ 261 IH_TYPE_LPC32XXIMAGE, /* x86 setup.bin Image */ 262 IH_TYPE_LOADABLE, /* A list of typeless images */ 263 IH_TYPE_RKIMAGE, /* Rockchip Boot Image */ 264 IH_TYPE_RKSD, /* Rockchip SD card */ 265 IH_TYPE_RKSPI, /* Rockchip SPI image */ 266 IH_TYPE_ZYNQIMAGE, /* Xilinx Zynq Boot Image */ 267 IH_TYPE_ZYNQMPIMAGE, /* Xilinx ZynqMP Boot Image */ 268 IH_TYPE_FPGA, /* FPGA Image */ 269 IH_TYPE_VYBRIDIMAGE, /* VYBRID .vyb Image */ 270 IH_TYPE_TEE, /* Trusted Execution Environment OS Image */ 271 IH_TYPE_FIRMWARE_IVT, /* Firmware Image with HABv4 IVT */ 272 IH_TYPE_PMMC, /* TI Power Management Micro-Controller Firmware */ 273 274 IH_TYPE_COUNT, /* Number of image types */ 275 }; 276 277 /* 278 * Compression Types 279 * 280 * The following are exposed to uImage header. 281 * Do not change values for backward compatibility. 282 */ 283 enum { 284 IH_COMP_NONE = 0, /* No Compression Used */ 285 IH_COMP_GZIP, /* gzip Compression Used */ 286 IH_COMP_BZIP2, /* bzip2 Compression Used */ 287 IH_COMP_LZMA, /* lzma Compression Used */ 288 IH_COMP_LZO, /* lzo Compression Used */ 289 IH_COMP_LZ4, /* lz4 Compression Used */ 290 291 IH_COMP_COUNT, 292 }; 293 294 #define IH_MAGIC 0x27051956 /* Image Magic Number */ 295 #define IH_NMLEN 32 /* Image Name Length */ 296 297 /* Reused from common.h */ 298 #define ROUND(a, b) (((a) + (b) - 1) & ~((b) - 1)) 299 300 /* 301 * Legacy format image header, 302 * all data in network byte order (aka natural aka bigendian). 303 */ 304 typedef struct image_header { 305 __be32 ih_magic; /* Image Header Magic Number */ 306 __be32 ih_hcrc; /* Image Header CRC Checksum */ 307 __be32 ih_time; /* Image Creation Timestamp */ 308 __be32 ih_size; /* Image Data Size */ 309 __be32 ih_load; /* Data Load Address */ 310 __be32 ih_ep; /* Entry Point Address */ 311 __be32 ih_dcrc; /* Image Data CRC Checksum */ 312 uint8_t ih_os; /* Operating System */ 313 uint8_t ih_arch; /* CPU architecture */ 314 uint8_t ih_type; /* Image Type */ 315 uint8_t ih_comp; /* Compression Type */ 316 uint8_t ih_name[IH_NMLEN]; /* Image Name */ 317 } image_header_t; 318 319 typedef struct image_info { 320 ulong start, end; /* start/end of blob */ 321 ulong image_start, image_len; /* start of image within blob, len of image */ 322 ulong load; /* load addr for the image */ 323 uint8_t comp, type, os; /* compression, type of image, os type */ 324 uint8_t arch; /* CPU architecture */ 325 } image_info_t; 326 327 /* 328 * Legacy and FIT format headers used by do_bootm() and do_bootm_<os>() 329 * routines. 330 */ 331 typedef struct bootm_headers { 332 /* 333 * Legacy os image header, if it is a multi component image 334 * then boot_get_ramdisk() and get_fdt() will attempt to get 335 * data from second and third component accordingly. 336 */ 337 image_header_t *legacy_hdr_os; /* image header pointer */ 338 image_header_t legacy_hdr_os_copy; /* header copy */ 339 ulong legacy_hdr_valid; 340 341 #if IMAGE_ENABLE_FIT 342 const char *fit_uname_cfg; /* configuration node unit name */ 343 344 void *fit_hdr_os; /* os FIT image header */ 345 const char *fit_uname_os; /* os subimage node unit name */ 346 int fit_noffset_os; /* os subimage node offset */ 347 348 void *fit_hdr_rd; /* init ramdisk FIT image header */ 349 const char *fit_uname_rd; /* init ramdisk subimage node unit name */ 350 int fit_noffset_rd; /* init ramdisk subimage node offset */ 351 352 void *fit_hdr_fdt; /* FDT blob FIT image header */ 353 const char *fit_uname_fdt; /* FDT blob subimage node unit name */ 354 int fit_noffset_fdt;/* FDT blob subimage node offset */ 355 356 void *fit_hdr_setup; /* x86 setup FIT image header */ 357 const char *fit_uname_setup; /* x86 setup subimage node name */ 358 int fit_noffset_setup;/* x86 setup subimage node offset */ 359 #endif 360 361 #ifndef USE_HOSTCC 362 image_info_t os; /* os image info */ 363 ulong ep; /* entry point of OS */ 364 365 ulong rd_start, rd_end;/* ramdisk start/end */ 366 367 char *ft_addr; /* flat dev tree address */ 368 ulong ft_len; /* length of flat device tree */ 369 370 ulong initrd_start; 371 ulong initrd_end; 372 ulong cmdline_start; 373 ulong cmdline_end; 374 bd_t *kbd; 375 #endif 376 377 int verify; /* env_get("verify")[0] != 'n' */ 378 379 #define BOOTM_STATE_START (0x00000001) 380 #define BOOTM_STATE_FINDOS (0x00000002) 381 #define BOOTM_STATE_FINDOTHER (0x00000004) 382 #define BOOTM_STATE_LOADOS (0x00000008) 383 #define BOOTM_STATE_RAMDISK (0x00000010) 384 #define BOOTM_STATE_FDT (0x00000020) 385 #define BOOTM_STATE_OS_CMDLINE (0x00000040) 386 #define BOOTM_STATE_OS_BD_T (0x00000080) 387 #define BOOTM_STATE_OS_PREP (0x00000100) 388 #define BOOTM_STATE_OS_FAKE_GO (0x00000200) /* 'Almost' run the OS */ 389 #define BOOTM_STATE_OS_GO (0x00000400) 390 int state; 391 392 #ifdef CONFIG_LMB 393 struct lmb lmb; /* for memory mgmt */ 394 #endif 395 } bootm_headers_t; 396 397 extern bootm_headers_t images; 398 399 /* 400 * Some systems (for example LWMON) have very short watchdog periods; 401 * we must make sure to split long operations like memmove() or 402 * checksum calculations into reasonable chunks. 403 */ 404 #ifndef CHUNKSZ 405 #define CHUNKSZ (64 * 1024) 406 #endif 407 408 #ifndef CHUNKSZ_CRC32 409 #define CHUNKSZ_CRC32 (64 * 1024) 410 #endif 411 412 #ifndef CHUNKSZ_MD5 413 #define CHUNKSZ_MD5 (64 * 1024) 414 #endif 415 416 #ifndef CHUNKSZ_SHA1 417 #define CHUNKSZ_SHA1 (64 * 1024) 418 #endif 419 420 #define uimage_to_cpu(x) be32_to_cpu(x) 421 #define cpu_to_uimage(x) cpu_to_be32(x) 422 423 /* 424 * Translation table for entries of a specific type; used by 425 * get_table_entry_id() and get_table_entry_name(). 426 */ 427 typedef struct table_entry { 428 int id; 429 char *sname; /* short (input) name to find table entry */ 430 char *lname; /* long (output) name to print for messages */ 431 } table_entry_t; 432 433 /* 434 * get_table_entry_id() scans the translation table trying to find an 435 * entry that matches the given short name. If a matching entry is 436 * found, it's id is returned to the caller. 437 */ 438 int get_table_entry_id(const table_entry_t *table, 439 const char *table_name, const char *name); 440 /* 441 * get_table_entry_name() scans the translation table trying to find 442 * an entry that matches the given id. If a matching entry is found, 443 * its long name is returned to the caller. 444 */ 445 char *get_table_entry_name(const table_entry_t *table, char *msg, int id); 446 447 const char *genimg_get_os_name(uint8_t os); 448 449 /** 450 * genimg_get_os_short_name() - get the short name for an OS 451 * 452 * @param os OS (IH_OS_...) 453 * @return OS short name, or "unknown" if unknown 454 */ 455 const char *genimg_get_os_short_name(uint8_t comp); 456 457 const char *genimg_get_arch_name(uint8_t arch); 458 459 /** 460 * genimg_get_arch_short_name() - get the short name for an architecture 461 * 462 * @param arch Architecture type (IH_ARCH_...) 463 * @return architecture short name, or "unknown" if unknown 464 */ 465 const char *genimg_get_arch_short_name(uint8_t arch); 466 467 const char *genimg_get_type_name(uint8_t type); 468 469 /** 470 * genimg_get_type_short_name() - get the short name for an image type 471 * 472 * @param type Image type (IH_TYPE_...) 473 * @return image short name, or "unknown" if unknown 474 */ 475 const char *genimg_get_type_short_name(uint8_t type); 476 477 const char *genimg_get_comp_name(uint8_t comp); 478 479 /** 480 * genimg_get_comp_short_name() - get the short name for a compression method 481 * 482 * @param comp compression method (IH_COMP_...) 483 * @return compression method short name, or "unknown" if unknown 484 */ 485 const char *genimg_get_comp_short_name(uint8_t comp); 486 487 /** 488 * genimg_get_cat_name() - Get the name of an item in a category 489 * 490 * @category: Category of item 491 * @id: Item ID 492 * @return name of item, or "Unknown ..." if unknown 493 */ 494 const char *genimg_get_cat_name(enum ih_category category, uint id); 495 496 /** 497 * genimg_get_cat_short_name() - Get the short name of an item in a category 498 * 499 * @category: Category of item 500 * @id: Item ID 501 * @return short name of item, or "Unknown ..." if unknown 502 */ 503 const char *genimg_get_cat_short_name(enum ih_category category, uint id); 504 505 /** 506 * genimg_get_cat_count() - Get the number of items in a category 507 * 508 * @category: Category to check 509 * @return the number of items in the category (IH_xxx_COUNT) 510 */ 511 int genimg_get_cat_count(enum ih_category category); 512 513 /** 514 * genimg_get_cat_desc() - Get the description of a category 515 * 516 * @return the description of a category, e.g. "architecture". This 517 * effectively converts the enum to a string. 518 */ 519 const char *genimg_get_cat_desc(enum ih_category category); 520 521 int genimg_get_os_id(const char *name); 522 int genimg_get_arch_id(const char *name); 523 int genimg_get_type_id(const char *name); 524 int genimg_get_comp_id(const char *name); 525 void genimg_print_size(uint32_t size); 526 527 #if defined(CONFIG_TIMESTAMP) || defined(CONFIG_CMD_DATE) || \ 528 defined(USE_HOSTCC) 529 #define IMAGE_ENABLE_TIMESTAMP 1 530 #else 531 #define IMAGE_ENABLE_TIMESTAMP 0 532 #endif 533 void genimg_print_time(time_t timestamp); 534 535 /* What to do with a image load address ('load = <> 'in the FIT) */ 536 enum fit_load_op { 537 FIT_LOAD_IGNORED, /* Ignore load address */ 538 FIT_LOAD_OPTIONAL, /* Can be provided, but optional */ 539 FIT_LOAD_OPTIONAL_NON_ZERO, /* Optional, a value of 0 is ignored */ 540 FIT_LOAD_REQUIRED, /* Must be provided */ 541 }; 542 543 int boot_get_setup(bootm_headers_t *images, uint8_t arch, ulong *setup_start, 544 ulong *setup_len); 545 546 #ifndef USE_HOSTCC 547 /* Image format types, returned by _get_format() routine */ 548 #define IMAGE_FORMAT_INVALID 0x00 549 #if defined(CONFIG_IMAGE_FORMAT_LEGACY) 550 #define IMAGE_FORMAT_LEGACY 0x01 /* legacy image_header based format */ 551 #endif 552 #define IMAGE_FORMAT_FIT 0x02 /* new, libfdt based format */ 553 #define IMAGE_FORMAT_ANDROID 0x03 /* Android boot image */ 554 555 ulong genimg_get_kernel_addr_fit(char * const img_addr, 556 const char **fit_uname_config, 557 const char **fit_uname_kernel); 558 ulong genimg_get_kernel_addr(char * const img_addr); 559 int genimg_get_format(const void *img_addr); 560 int genimg_has_config(bootm_headers_t *images); 561 562 int boot_get_fpga(int argc, char * const argv[], bootm_headers_t *images, 563 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 564 int boot_get_ramdisk(int argc, char * const argv[], bootm_headers_t *images, 565 uint8_t arch, ulong *rd_start, ulong *rd_end); 566 567 /** 568 * boot_get_loadable - routine to load a list of binaries to memory 569 * @argc: Ignored Argument 570 * @argv: Ignored Argument 571 * @images: pointer to the bootm images structure 572 * @arch: expected architecture for the image 573 * @ld_start: Ignored Argument 574 * @ld_len: Ignored Argument 575 * 576 * boot_get_loadable() will take the given FIT configuration, and look 577 * for a field named "loadables". Loadables, is a list of elements in 578 * the FIT given as strings. exe: 579 * loadables = "linux_kernel@1", "fdt@2"; 580 * this function will attempt to parse each string, and load the 581 * corresponding element from the FIT into memory. Once placed, 582 * no aditional actions are taken. 583 * 584 * @return: 585 * 0, if only valid images or no images are found 586 * error code, if an error occurs during fit_image_load 587 */ 588 int boot_get_loadable(int argc, char * const argv[], bootm_headers_t *images, 589 uint8_t arch, const ulong *ld_start, ulong * const ld_len); 590 #endif /* !USE_HOSTCC */ 591 592 int boot_get_setup_fit(bootm_headers_t *images, uint8_t arch, 593 ulong *setup_start, ulong *setup_len); 594 595 /** 596 * boot_get_fdt_fit() - load a DTB from a FIT file (applying overlays) 597 * 598 * This deals with all aspects of loading an DTB from a FIT. 599 * The correct base image based on configuration will be selected, and 600 * then any overlays specified will be applied (as present in fit_uname_configp). 601 * 602 * @param images Boot images structure 603 * @param addr Address of FIT in memory 604 * @param fit_unamep On entry this is the requested image name 605 * (e.g. "kernel@1") or NULL to use the default. On exit 606 * points to the selected image name 607 * @param fit_uname_configp On entry this is the requested configuration 608 * name (e.g. "conf@1") or NULL to use the default. On 609 * exit points to the selected configuration name. 610 * @param arch Expected architecture (IH_ARCH_...) 611 * @param datap Returns address of loaded image 612 * @param lenp Returns length of loaded image 613 * 614 * @return node offset of base image, or -ve error code on error 615 */ 616 int boot_get_fdt_fit(bootm_headers_t *images, ulong addr, 617 const char **fit_unamep, const char **fit_uname_configp, 618 int arch, ulong *datap, ulong *lenp); 619 620 /** 621 * fit_image_load() - load an image from a FIT 622 * 623 * This deals with all aspects of loading an image from a FIT, including 624 * selecting the right image based on configuration, verifying it, printing 625 * out progress messages, checking the type/arch/os and optionally copying it 626 * to the right load address. 627 * 628 * The property to look up is defined by image_type. 629 * 630 * @param images Boot images structure 631 * @param addr Address of FIT in memory 632 * @param fit_unamep On entry this is the requested image name 633 * (e.g. "kernel@1") or NULL to use the default. On exit 634 * points to the selected image name 635 * @param fit_uname_configp On entry this is the requested configuration 636 * name (e.g. "conf@1") or NULL to use the default. On 637 * exit points to the selected configuration name. 638 * @param arch Expected architecture (IH_ARCH_...) 639 * @param image_type Required image type (IH_TYPE_...). If this is 640 * IH_TYPE_KERNEL then we allow IH_TYPE_KERNEL_NOLOAD 641 * also. 642 * @param bootstage_id ID of starting bootstage to use for progress updates. 643 * This will be added to the BOOTSTAGE_SUB values when 644 * calling bootstage_mark() 645 * @param load_op Decribes what to do with the load address 646 * @param datap Returns address of loaded image 647 * @param lenp Returns length of loaded image 648 * @return node offset of image, or -ve error code on error 649 */ 650 int fit_image_load(bootm_headers_t *images, ulong addr, 651 const char **fit_unamep, const char **fit_uname_configp, 652 int arch, int image_type, int bootstage_id, 653 enum fit_load_op load_op, ulong *datap, ulong *lenp); 654 655 #ifndef USE_HOSTCC 656 /** 657 * fit_get_node_from_config() - Look up an image a FIT by type 658 * 659 * This looks in the selected conf@ node (images->fit_uname_cfg) for a 660 * particular image type (e.g. "kernel") and then finds the image that is 661 * referred to. 662 * 663 * For example, for something like: 664 * 665 * images { 666 * kernel@1 { 667 * ... 668 * }; 669 * }; 670 * configurations { 671 * conf@1 { 672 * kernel = "kernel@1"; 673 * }; 674 * }; 675 * 676 * the function will return the node offset of the kernel@1 node, assuming 677 * that conf@1 is the chosen configuration. 678 * 679 * @param images Boot images structure 680 * @param prop_name Property name to look up (FIT_..._PROP) 681 * @param addr Address of FIT in memory 682 */ 683 int fit_get_node_from_config(bootm_headers_t *images, const char *prop_name, 684 ulong addr); 685 686 int boot_get_fdt(int flag, int argc, char * const argv[], uint8_t arch, 687 bootm_headers_t *images, 688 char **of_flat_tree, ulong *of_size); 689 void boot_fdt_add_mem_rsv_regions(struct lmb *lmb, void *fdt_blob); 690 int boot_relocate_fdt(struct lmb *lmb, char **of_flat_tree, ulong *of_size); 691 692 int boot_ramdisk_high(struct lmb *lmb, ulong rd_data, ulong rd_len, 693 ulong *initrd_start, ulong *initrd_end); 694 int boot_get_cmdline(struct lmb *lmb, ulong *cmd_start, ulong *cmd_end); 695 #ifdef CONFIG_SYS_BOOT_GET_KBD 696 int boot_get_kbd(struct lmb *lmb, bd_t **kbd); 697 #endif /* CONFIG_SYS_BOOT_GET_KBD */ 698 #endif /* !USE_HOSTCC */ 699 700 /*******************************************************************/ 701 /* Legacy format specific code (prefixed with image_) */ 702 /*******************************************************************/ 703 static inline uint32_t image_get_header_size(void) 704 { 705 return (sizeof(image_header_t)); 706 } 707 708 #define image_get_hdr_l(f) \ 709 static inline uint32_t image_get_##f(const image_header_t *hdr) \ 710 { \ 711 return uimage_to_cpu(hdr->ih_##f); \ 712 } 713 image_get_hdr_l(magic) /* image_get_magic */ 714 image_get_hdr_l(hcrc) /* image_get_hcrc */ 715 image_get_hdr_l(time) /* image_get_time */ 716 image_get_hdr_l(size) /* image_get_size */ 717 image_get_hdr_l(load) /* image_get_load */ 718 image_get_hdr_l(ep) /* image_get_ep */ 719 image_get_hdr_l(dcrc) /* image_get_dcrc */ 720 721 #define image_get_hdr_b(f) \ 722 static inline uint8_t image_get_##f(const image_header_t *hdr) \ 723 { \ 724 return hdr->ih_##f; \ 725 } 726 image_get_hdr_b(os) /* image_get_os */ 727 image_get_hdr_b(arch) /* image_get_arch */ 728 image_get_hdr_b(type) /* image_get_type */ 729 image_get_hdr_b(comp) /* image_get_comp */ 730 731 static inline char *image_get_name(const image_header_t *hdr) 732 { 733 return (char *)hdr->ih_name; 734 } 735 736 static inline uint32_t image_get_data_size(const image_header_t *hdr) 737 { 738 return image_get_size(hdr); 739 } 740 741 /** 742 * image_get_data - get image payload start address 743 * @hdr: image header 744 * 745 * image_get_data() returns address of the image payload. For single 746 * component images it is image data start. For multi component 747 * images it points to the null terminated table of sub-images sizes. 748 * 749 * returns: 750 * image payload data start address 751 */ 752 static inline ulong image_get_data(const image_header_t *hdr) 753 { 754 return ((ulong)hdr + image_get_header_size()); 755 } 756 757 static inline uint32_t image_get_image_size(const image_header_t *hdr) 758 { 759 return (image_get_size(hdr) + image_get_header_size()); 760 } 761 static inline ulong image_get_image_end(const image_header_t *hdr) 762 { 763 return ((ulong)hdr + image_get_image_size(hdr)); 764 } 765 766 #define image_set_hdr_l(f) \ 767 static inline void image_set_##f(image_header_t *hdr, uint32_t val) \ 768 { \ 769 hdr->ih_##f = cpu_to_uimage(val); \ 770 } 771 image_set_hdr_l(magic) /* image_set_magic */ 772 image_set_hdr_l(hcrc) /* image_set_hcrc */ 773 image_set_hdr_l(time) /* image_set_time */ 774 image_set_hdr_l(size) /* image_set_size */ 775 image_set_hdr_l(load) /* image_set_load */ 776 image_set_hdr_l(ep) /* image_set_ep */ 777 image_set_hdr_l(dcrc) /* image_set_dcrc */ 778 779 #define image_set_hdr_b(f) \ 780 static inline void image_set_##f(image_header_t *hdr, uint8_t val) \ 781 { \ 782 hdr->ih_##f = val; \ 783 } 784 image_set_hdr_b(os) /* image_set_os */ 785 image_set_hdr_b(arch) /* image_set_arch */ 786 image_set_hdr_b(type) /* image_set_type */ 787 image_set_hdr_b(comp) /* image_set_comp */ 788 789 static inline void image_set_name(image_header_t *hdr, const char *name) 790 { 791 strncpy(image_get_name(hdr), name, IH_NMLEN); 792 } 793 794 int image_check_hcrc(const image_header_t *hdr); 795 int image_check_dcrc(const image_header_t *hdr); 796 #ifndef USE_HOSTCC 797 ulong env_get_bootm_low(void); 798 phys_size_t env_get_bootm_size(void); 799 phys_size_t env_get_bootm_mapsize(void); 800 #endif 801 void memmove_wd(void *to, void *from, size_t len, ulong chunksz); 802 803 static inline int image_check_magic(const image_header_t *hdr) 804 { 805 return (image_get_magic(hdr) == IH_MAGIC); 806 } 807 static inline int image_check_type(const image_header_t *hdr, uint8_t type) 808 { 809 return (image_get_type(hdr) == type); 810 } 811 static inline int image_check_arch(const image_header_t *hdr, uint8_t arch) 812 { 813 return (image_get_arch(hdr) == arch) || 814 (image_get_arch(hdr) == IH_ARCH_ARM && arch == IH_ARCH_ARM64); 815 } 816 static inline int image_check_os(const image_header_t *hdr, uint8_t os) 817 { 818 return (image_get_os(hdr) == os); 819 } 820 821 ulong image_multi_count(const image_header_t *hdr); 822 void image_multi_getimg(const image_header_t *hdr, ulong idx, 823 ulong *data, ulong *len); 824 825 void image_print_contents(const void *hdr); 826 827 #ifndef USE_HOSTCC 828 static inline int image_check_target_arch(const image_header_t *hdr) 829 { 830 #ifndef IH_ARCH_DEFAULT 831 # error "please define IH_ARCH_DEFAULT in your arch asm/u-boot.h" 832 #endif 833 return image_check_arch(hdr, IH_ARCH_DEFAULT); 834 } 835 #endif /* USE_HOSTCC */ 836 837 /** 838 * Set up properties in the FDT 839 * 840 * This sets up properties in the FDT that is to be passed to linux. 841 * 842 * @images: Images information 843 * @blob: FDT to update 844 * @of_size: Size of the FDT 845 * @lmb: Points to logical memory block structure 846 * @return 0 if ok, <0 on failure 847 */ 848 int image_setup_libfdt(bootm_headers_t *images, void *blob, 849 int of_size, struct lmb *lmb); 850 851 /** 852 * Set up the FDT to use for booting a kernel 853 * 854 * This performs ramdisk setup, sets up the FDT if required, and adds 855 * paramters to the FDT if libfdt is available. 856 * 857 * @param images Images information 858 * @return 0 if ok, <0 on failure 859 */ 860 int image_setup_linux(bootm_headers_t *images); 861 862 /** 863 * bootz_setup() - Extract stat and size of a Linux xImage 864 * 865 * @image: Address of image 866 * @start: Returns start address of image 867 * @end : Returns end address of image 868 * @return 0 if OK, 1 if the image was not recognised 869 */ 870 int bootz_setup(ulong image, ulong *start, ulong *end); 871 872 873 /*******************************************************************/ 874 /* New uImage format specific code (prefixed with fit_) */ 875 /*******************************************************************/ 876 877 #define FIT_IMAGES_PATH "/images" 878 #define FIT_CONFS_PATH "/configurations" 879 880 /* hash/signature node */ 881 #define FIT_HASH_NODENAME "hash" 882 #define FIT_ALGO_PROP "algo" 883 #define FIT_VALUE_PROP "value" 884 #define FIT_IGNORE_PROP "uboot-ignore" 885 #define FIT_SIG_NODENAME "signature" 886 887 /* image node */ 888 #define FIT_DATA_PROP "data" 889 #define FIT_DATA_OFFSET_PROP "data-offset" 890 #define FIT_DATA_SIZE_PROP "data-size" 891 #define FIT_TIMESTAMP_PROP "timestamp" 892 #define FIT_DESC_PROP "description" 893 #define FIT_ARCH_PROP "arch" 894 #define FIT_TYPE_PROP "type" 895 #define FIT_OS_PROP "os" 896 #define FIT_COMP_PROP "compression" 897 #define FIT_ENTRY_PROP "entry" 898 #define FIT_LOAD_PROP "load" 899 900 /* configuration node */ 901 #define FIT_KERNEL_PROP "kernel" 902 #define FIT_RAMDISK_PROP "ramdisk" 903 #define FIT_FDT_PROP "fdt" 904 #define FIT_LOADABLE_PROP "loadables" 905 #define FIT_DEFAULT_PROP "default" 906 #define FIT_SETUP_PROP "setup" 907 #define FIT_FPGA_PROP "fpga" 908 909 #define FIT_MAX_HASH_LEN HASH_MAX_DIGEST_SIZE 910 911 #if IMAGE_ENABLE_FIT 912 /* cmdline argument format parsing */ 913 int fit_parse_conf(const char *spec, ulong addr_curr, 914 ulong *addr, const char **conf_name); 915 int fit_parse_subimage(const char *spec, ulong addr_curr, 916 ulong *addr, const char **image_name); 917 918 int fit_get_subimage_count(const void *fit, int images_noffset); 919 void fit_print_contents(const void *fit); 920 void fit_image_print(const void *fit, int noffset, const char *p); 921 922 /** 923 * fit_get_end - get FIT image size 924 * @fit: pointer to the FIT format image header 925 * 926 * returns: 927 * size of the FIT image (blob) in memory 928 */ 929 static inline ulong fit_get_size(const void *fit) 930 { 931 return fdt_totalsize(fit); 932 } 933 934 /** 935 * fit_get_end - get FIT image end 936 * @fit: pointer to the FIT format image header 937 * 938 * returns: 939 * end address of the FIT image (blob) in memory 940 */ 941 ulong fit_get_end(const void *fit); 942 943 /** 944 * fit_get_name - get FIT node name 945 * @fit: pointer to the FIT format image header 946 * 947 * returns: 948 * NULL, on error 949 * pointer to node name, on success 950 */ 951 static inline const char *fit_get_name(const void *fit_hdr, 952 int noffset, int *len) 953 { 954 return fdt_get_name(fit_hdr, noffset, len); 955 } 956 957 int fit_get_desc(const void *fit, int noffset, char **desc); 958 int fit_get_timestamp(const void *fit, int noffset, time_t *timestamp); 959 960 int fit_image_get_node(const void *fit, const char *image_uname); 961 int fit_image_get_os(const void *fit, int noffset, uint8_t *os); 962 int fit_image_get_arch(const void *fit, int noffset, uint8_t *arch); 963 int fit_image_get_type(const void *fit, int noffset, uint8_t *type); 964 int fit_image_get_comp(const void *fit, int noffset, uint8_t *comp); 965 int fit_image_get_load(const void *fit, int noffset, ulong *load); 966 int fit_image_get_entry(const void *fit, int noffset, ulong *entry); 967 int fit_image_get_data(const void *fit, int noffset, 968 const void **data, size_t *size); 969 int fit_image_get_data_offset(const void *fit, int noffset, int *data_offset); 970 int fit_image_get_data_size(const void *fit, int noffset, int *data_size); 971 972 int fit_image_hash_get_algo(const void *fit, int noffset, char **algo); 973 int fit_image_hash_get_value(const void *fit, int noffset, uint8_t **value, 974 int *value_len); 975 976 int fit_set_timestamp(void *fit, int noffset, time_t timestamp); 977 978 /** 979 * fit_add_verification_data() - add verification data to FIT image nodes 980 * 981 * @keydir: Directory containing keys 982 * @kwydest: FDT blob to write public key information to 983 * @fit: Pointer to the FIT format image header 984 * @comment: Comment to add to signature nodes 985 * @require_keys: Mark all keys as 'required' 986 * @engine_id: Engine to use for signing 987 * 988 * Adds hash values for all component images in the FIT blob. 989 * Hashes are calculated for all component images which have hash subnodes 990 * with algorithm property set to one of the supported hash algorithms. 991 * 992 * Also add signatures if signature nodes are present. 993 * 994 * returns 995 * 0, on success 996 * libfdt error code, on failure 997 */ 998 int fit_add_verification_data(const char *keydir, void *keydest, void *fit, 999 const char *comment, int require_keys, 1000 const char *engine_id); 1001 1002 int fit_image_verify(const void *fit, int noffset); 1003 int fit_config_verify(const void *fit, int conf_noffset); 1004 int fit_all_image_verify(const void *fit); 1005 int fit_image_check_os(const void *fit, int noffset, uint8_t os); 1006 int fit_image_check_arch(const void *fit, int noffset, uint8_t arch); 1007 int fit_image_check_type(const void *fit, int noffset, uint8_t type); 1008 int fit_image_check_comp(const void *fit, int noffset, uint8_t comp); 1009 int fit_check_format(const void *fit); 1010 1011 int fit_conf_find_compat(const void *fit, const void *fdt); 1012 int fit_conf_get_node(const void *fit, const char *conf_uname); 1013 1014 /** 1015 * fit_conf_get_prop_node() - Get node refered to by a configuration 1016 * @fit: FIT to check 1017 * @noffset: Offset of conf@xxx node to check 1018 * @prop_name: Property to read from the conf node 1019 * 1020 * The conf@ nodes contain references to other nodes, using properties 1021 * like 'kernel = "kernel@1"'. Given such a property name (e.g. "kernel"), 1022 * return the offset of the node referred to (e.g. offset of node 1023 * "/images/kernel@1". 1024 */ 1025 int fit_conf_get_prop_node(const void *fit, int noffset, 1026 const char *prop_name); 1027 1028 void fit_conf_print(const void *fit, int noffset, const char *p); 1029 1030 int fit_check_ramdisk(const void *fit, int os_noffset, 1031 uint8_t arch, int verify); 1032 1033 int calculate_hash(const void *data, int data_len, const char *algo, 1034 uint8_t *value, int *value_len); 1035 1036 /* 1037 * At present we only support signing on the host, and verification on the 1038 * device 1039 */ 1040 #if defined(CONFIG_FIT_SIGNATURE) 1041 # ifdef USE_HOSTCC 1042 # define IMAGE_ENABLE_SIGN 1 1043 # define IMAGE_ENABLE_VERIFY 1 1044 # include <openssl/evp.h> 1045 #else 1046 # define IMAGE_ENABLE_SIGN 0 1047 # define IMAGE_ENABLE_VERIFY 1 1048 # endif 1049 #else 1050 # define IMAGE_ENABLE_SIGN 0 1051 # define IMAGE_ENABLE_VERIFY 0 1052 #endif 1053 1054 #ifdef USE_HOSTCC 1055 void *image_get_host_blob(void); 1056 void image_set_host_blob(void *host_blob); 1057 # define gd_fdt_blob() image_get_host_blob() 1058 #else 1059 # define gd_fdt_blob() (gd->fdt_blob) 1060 #endif 1061 1062 #ifdef CONFIG_FIT_BEST_MATCH 1063 #define IMAGE_ENABLE_BEST_MATCH 1 1064 #else 1065 #define IMAGE_ENABLE_BEST_MATCH 0 1066 #endif 1067 1068 /* Information passed to the signing routines */ 1069 struct image_sign_info { 1070 const char *keydir; /* Directory conaining keys */ 1071 const char *keyname; /* Name of key to use */ 1072 void *fit; /* Pointer to FIT blob */ 1073 int node_offset; /* Offset of signature node */ 1074 const char *name; /* Algorithm name */ 1075 struct checksum_algo *checksum; /* Checksum algorithm information */ 1076 struct crypto_algo *crypto; /* Crypto algorithm information */ 1077 const void *fdt_blob; /* FDT containing public keys */ 1078 int required_keynode; /* Node offset of key to use: -1=any */ 1079 const char *require_keys; /* Value for 'required' property */ 1080 const char *engine_id; /* Engine to use for signing */ 1081 }; 1082 #endif /* Allow struct image_region to always be defined for rsa.h */ 1083 1084 /* A part of an image, used for hashing */ 1085 struct image_region { 1086 const void *data; 1087 int size; 1088 }; 1089 1090 #if IMAGE_ENABLE_FIT 1091 1092 #if IMAGE_ENABLE_VERIFY 1093 # include <u-boot/rsa-checksum.h> 1094 #endif 1095 struct checksum_algo { 1096 const char *name; 1097 const int checksum_len; 1098 const int der_len; 1099 const uint8_t *der_prefix; 1100 #if IMAGE_ENABLE_SIGN 1101 const EVP_MD *(*calculate_sign)(void); 1102 #endif 1103 int (*calculate)(const char *name, 1104 const struct image_region region[], 1105 int region_count, uint8_t *checksum); 1106 }; 1107 1108 struct crypto_algo { 1109 const char *name; /* Name of algorithm */ 1110 const int key_len; 1111 1112 /** 1113 * sign() - calculate and return signature for given input data 1114 * 1115 * @info: Specifies key and FIT information 1116 * @data: Pointer to the input data 1117 * @data_len: Data length 1118 * @sigp: Set to an allocated buffer holding the signature 1119 * @sig_len: Set to length of the calculated hash 1120 * 1121 * This computes input data signature according to selected algorithm. 1122 * Resulting signature value is placed in an allocated buffer, the 1123 * pointer is returned as *sigp. The length of the calculated 1124 * signature is returned via the sig_len pointer argument. The caller 1125 * should free *sigp. 1126 * 1127 * @return: 0, on success, -ve on error 1128 */ 1129 int (*sign)(struct image_sign_info *info, 1130 const struct image_region region[], 1131 int region_count, uint8_t **sigp, uint *sig_len); 1132 1133 /** 1134 * add_verify_data() - Add verification information to FDT 1135 * 1136 * Add public key information to the FDT node, suitable for 1137 * verification at run-time. The information added depends on the 1138 * algorithm being used. 1139 * 1140 * @info: Specifies key and FIT information 1141 * @keydest: Destination FDT blob for public key data 1142 * @return: 0, on success, -ve on error 1143 */ 1144 int (*add_verify_data)(struct image_sign_info *info, void *keydest); 1145 1146 /** 1147 * verify() - Verify a signature against some data 1148 * 1149 * @info: Specifies key and FIT information 1150 * @data: Pointer to the input data 1151 * @data_len: Data length 1152 * @sig: Signature 1153 * @sig_len: Number of bytes in signature 1154 * @return 0 if verified, -ve on error 1155 */ 1156 int (*verify)(struct image_sign_info *info, 1157 const struct image_region region[], int region_count, 1158 uint8_t *sig, uint sig_len); 1159 }; 1160 1161 /** 1162 * image_get_checksum_algo() - Look up a checksum algorithm 1163 * 1164 * @param full_name Name of algorithm in the form "checksum,crypto" 1165 * @return pointer to algorithm information, or NULL if not found 1166 */ 1167 struct checksum_algo *image_get_checksum_algo(const char *full_name); 1168 1169 /** 1170 * image_get_crypto_algo() - Look up a cryptosystem algorithm 1171 * 1172 * @param full_name Name of algorithm in the form "checksum,crypto" 1173 * @return pointer to algorithm information, or NULL if not found 1174 */ 1175 struct crypto_algo *image_get_crypto_algo(const char *full_name); 1176 1177 /** 1178 * fit_image_verify_required_sigs() - Verify signatures marked as 'required' 1179 * 1180 * @fit: FIT to check 1181 * @image_noffset: Offset of image node to check 1182 * @data: Image data to check 1183 * @size: Size of image data 1184 * @sig_blob: FDT containing public keys 1185 * @no_sigsp: Returns 1 if no signatures were required, and 1186 * therefore nothing was checked. The caller may wish 1187 * to fall back to other mechanisms, or refuse to 1188 * boot. 1189 * @return 0 if all verified ok, <0 on error 1190 */ 1191 int fit_image_verify_required_sigs(const void *fit, int image_noffset, 1192 const char *data, size_t size, const void *sig_blob, 1193 int *no_sigsp); 1194 1195 /** 1196 * fit_image_check_sig() - Check a single image signature node 1197 * 1198 * @fit: FIT to check 1199 * @noffset: Offset of signature node to check 1200 * @data: Image data to check 1201 * @size: Size of image data 1202 * @required_keynode: Offset in the control FDT of the required key node, 1203 * if any. If this is given, then the image wil not 1204 * pass verification unless that key is used. If this is 1205 * -1 then any signature will do. 1206 * @err_msgp: In the event of an error, this will be pointed to a 1207 * help error string to display to the user. 1208 * @return 0 if all verified ok, <0 on error 1209 */ 1210 int fit_image_check_sig(const void *fit, int noffset, const void *data, 1211 size_t size, int required_keynode, char **err_msgp); 1212 1213 /** 1214 * fit_region_make_list() - Make a list of regions to hash 1215 * 1216 * Given a list of FIT regions (offset, size) provided by libfdt, create 1217 * a list of regions (void *, size) for use by the signature creationg 1218 * and verification code. 1219 * 1220 * @fit: FIT image to process 1221 * @fdt_regions: Regions as returned by libfdt 1222 * @count: Number of regions returned by libfdt 1223 * @region: Place to put list of regions (NULL to allocate it) 1224 * @return pointer to list of regions, or NULL if out of memory 1225 */ 1226 struct image_region *fit_region_make_list(const void *fit, 1227 struct fdt_region *fdt_regions, int count, 1228 struct image_region *region); 1229 1230 static inline int fit_image_check_target_arch(const void *fdt, int node) 1231 { 1232 #ifndef USE_HOSTCC 1233 return fit_image_check_arch(fdt, node, IH_ARCH_DEFAULT); 1234 #else 1235 return 0; 1236 #endif 1237 } 1238 1239 #ifdef CONFIG_FIT_VERBOSE 1240 #define fit_unsupported(msg) printf("! %s:%d " \ 1241 "FIT images not supported for '%s'\n", \ 1242 __FILE__, __LINE__, (msg)) 1243 1244 #define fit_unsupported_reset(msg) printf("! %s:%d " \ 1245 "FIT images not supported for '%s' " \ 1246 "- must reset board to recover!\n", \ 1247 __FILE__, __LINE__, (msg)) 1248 #else 1249 #define fit_unsupported(msg) 1250 #define fit_unsupported_reset(msg) 1251 #endif /* CONFIG_FIT_VERBOSE */ 1252 #endif /* CONFIG_FIT */ 1253 1254 #if defined(CONFIG_ANDROID_BOOT_IMAGE) 1255 struct andr_img_hdr; 1256 int android_image_check_header(const struct andr_img_hdr *hdr); 1257 int android_image_get_kernel(const struct andr_img_hdr *hdr, int verify, 1258 ulong *os_data, ulong *os_len); 1259 int android_image_get_ramdisk(const struct andr_img_hdr *hdr, 1260 ulong *rd_data, ulong *rd_len); 1261 ulong android_image_get_end(const struct andr_img_hdr *hdr); 1262 ulong android_image_get_kload(const struct andr_img_hdr *hdr); 1263 void android_print_contents(const struct andr_img_hdr *hdr); 1264 1265 #endif /* CONFIG_ANDROID_BOOT_IMAGE */ 1266 1267 /** 1268 * board_fit_config_name_match() - Check for a matching board name 1269 * 1270 * This is used when SPL loads a FIT containing multiple device tree files 1271 * and wants to work out which one to use. The description of each one is 1272 * passed to this function. The description comes from the 'description' field 1273 * in each (FDT) image node. 1274 * 1275 * @name: Device tree description 1276 * @return 0 if this device tree should be used, non-zero to try the next 1277 */ 1278 int board_fit_config_name_match(const char *name); 1279 1280 #if defined(CONFIG_SPL_FIT_IMAGE_POST_PROCESS) || \ 1281 defined(CONFIG_FIT_IMAGE_POST_PROCESS) 1282 /** 1283 * board_fit_image_post_process() - Do any post-process on FIT binary data 1284 * 1285 * This is used to do any sort of image manipulation, verification, decryption 1286 * etc. in a platform or board specific way. Obviously, anything done here would 1287 * need to be comprehended in how the images were prepared before being injected 1288 * into the FIT creation (i.e. the binary blobs would have been pre-processed 1289 * before being added to the FIT image). 1290 * 1291 * @image: pointer to the image start pointer 1292 * @size: pointer to the image size 1293 * @return no return value (failure should be handled internally) 1294 */ 1295 void board_fit_image_post_process(void **p_image, size_t *p_size); 1296 #endif /* CONFIG_SPL_FIT_IMAGE_POST_PROCESS */ 1297 1298 #define FDT_ERROR ((ulong)(-1)) 1299 1300 ulong fdt_getprop_u32(const void *fdt, int node, const char *prop); 1301 1302 /** 1303 * fit_find_config_node() - Find the node for the best DTB in a FIT image 1304 * 1305 * A FIT image contains one or more DTBs. This function parses the 1306 * configurations described in the FIT images and returns the node of 1307 * the first matching DTB. To check if a DTB matches a board, this function 1308 * calls board_fit_config_name_match(). If no matching DTB is found, it returns 1309 * the node described by the default configuration if it exists. 1310 * 1311 * @fdt: pointer to flat device tree 1312 * @return the node if found, -ve otherwise 1313 */ 1314 int fit_find_config_node(const void *fdt); 1315 1316 /** 1317 * Mapping of image types to function handlers to be invoked on the associated 1318 * loaded images 1319 * 1320 * @type: Type of image, I.E. IH_TYPE_* 1321 * @handler: Function to call on loaded image 1322 */ 1323 struct fit_loadable_tbl { 1324 int type; 1325 /** 1326 * handler() - Process a loaded image 1327 * 1328 * @data: Pointer to start of loaded image data 1329 * @size: Size of loaded image data 1330 */ 1331 void (*handler)(ulong data, size_t size); 1332 }; 1333 1334 /* 1335 * Define a FIT loadable image type handler 1336 * 1337 * _type is a valid uimage_type ID as defined in the "Image Type" enum above 1338 * _handler is the handler function to call after this image type is loaded 1339 */ 1340 #define U_BOOT_FIT_LOADABLE_HANDLER(_type, _handler) \ 1341 ll_entry_declare(struct fit_loadable_tbl, _function, fit_loadable) = { \ 1342 .type = _type, \ 1343 .handler = _handler, \ 1344 } 1345 1346 #endif /* __IMAGE_H__ */ 1347