1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2007 4 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com 5 */ 6 7 #ifndef __FDT_SUPPORT_H 8 #define __FDT_SUPPORT_H 9 10 #ifdef CONFIG_OF_LIBFDT 11 12 #include <linux/libfdt.h> 13 14 u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, 15 const char *prop, const u32 dflt); 16 u32 fdt_getprop_u32_default(const void *fdt, const char *path, 17 const char *prop, const u32 dflt); 18 19 /** 20 * Add data to the root of the FDT before booting the OS. 21 * 22 * See doc/device-tree-bindings/root.txt 23 * 24 * @param fdt FDT address in memory 25 * @return 0 if ok, or -FDT_ERR_... on error 26 */ 27 int fdt_root(void *fdt); 28 29 /** 30 * Add chosen data the FDT before booting the OS. 31 * 32 * In particular, this adds the kernel command line (bootargs) to the FDT. 33 * 34 * @param fdt FDT address in memory 35 * @return 0 if ok, or -FDT_ERR_... on error 36 */ 37 int fdt_chosen(void *fdt); 38 39 /** 40 * Add initrd information to the FDT before booting the OS. 41 * 42 * @param fdt FDT address in memory 43 * @return 0 if ok, or -FDT_ERR_... on error 44 */ 45 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); 46 47 void do_fixup_by_path(void *fdt, const char *path, const char *prop, 48 const void *val, int len, int create); 49 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, 50 u32 val, int create); 51 52 static inline void do_fixup_by_path_string(void *fdt, const char *path, 53 const char *prop, const char *status) 54 { 55 do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1); 56 } 57 58 void do_fixup_by_prop(void *fdt, 59 const char *pname, const void *pval, int plen, 60 const char *prop, const void *val, int len, 61 int create); 62 void do_fixup_by_prop_u32(void *fdt, 63 const char *pname, const void *pval, int plen, 64 const char *prop, u32 val, int create); 65 void do_fixup_by_compat(void *fdt, const char *compat, 66 const char *prop, const void *val, int len, int create); 67 void do_fixup_by_compat_u32(void *fdt, const char *compat, 68 const char *prop, u32 val, int create); 69 /** 70 * Setup the memory node in the DT. Creates one if none was existing before. 71 * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the 72 * whole memory. 73 * 74 * @param blob FDT blob to update 75 * @param start Begin of DRAM mapping in physical memory 76 * @param size Size of the single memory bank 77 * @return 0 if ok, or -1 or -FDT_ERR_... on error 78 */ 79 int fdt_fixup_memory(void *blob, u64 start, u64 size); 80 81 /** 82 * Fill the DT memory node with multiple memory banks. 83 * Creates the node if none was existing before. 84 * If banks is 0, it will not touch the existing reg property. This allows 85 * boards to not mess with the existing DT setup, which may have been 86 * filled in properly before. 87 * 88 * @param blob FDT blob to update 89 * @param start Array of size <banks> to hold the start addresses. 90 * @param size Array of size <banks> to hold the size of each region. 91 * @param banks Number of memory banks to create. If 0, the reg 92 * property will be left untouched. 93 * @return 0 if ok, or -1 or -FDT_ERR_... on error 94 */ 95 #ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY 96 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); 97 #else 98 static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], 99 int banks) 100 { 101 return 0; 102 } 103 #endif 104 105 void fdt_fixup_ethernet(void *fdt); 106 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, 107 const void *val, int len, int create); 108 void fdt_fixup_qe_firmware(void *fdt); 109 110 /** 111 * Update native-mode property of display-timings node to the phandle 112 * of the timings matching a display by name (case insensitive). 113 * 114 * see kernel Documentation/devicetree/bindings/video/display-timing.txt 115 * 116 * @param blob FDT blob to update 117 * @param path path within dt 118 * @param display name of display timing to match 119 * @return 0 if ok, or -FDT_ERR_... on error 120 */ 121 int fdt_fixup_display(void *blob, const char *path, const char *display); 122 123 #if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) 124 void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd); 125 #else 126 static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {} 127 #endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */ 128 129 #if defined(CONFIG_SYS_FSL_SEC_COMPAT) 130 void fdt_fixup_crypto_node(void *blob, int sec_rev); 131 #else 132 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} 133 #endif 134 135 /** 136 * Record information about a processed loadable in /fit-images (creating 137 * /fit-images if necessary). 138 * 139 * @param blob FDT blob to update 140 * @param index index of this loadable 141 * @param name name of the loadable 142 * @param load_addr address the loadable was loaded to 143 * @param size number of bytes loaded 144 * @param entry_point entry point (if specified, otherwise pass -1) 145 * @param type type (if specified, otherwise pass NULL) 146 * @param os os-type (if specified, otherwise pass NULL) 147 * @return 0 if ok, or -1 or -FDT_ERR_... on error 148 */ 149 int fdt_record_loadable(void *blob, u32 index, const char *name, 150 uintptr_t load_addr, u32 size, uintptr_t entry_point, 151 const char *type, const char *os); 152 153 #ifdef CONFIG_PCI 154 #include <pci.h> 155 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); 156 #endif 157 158 int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name); 159 160 /** 161 * Add board-specific data to the FDT before booting the OS. 162 * 163 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. 164 * This function is called if CONFIG_OF_BOARD_SETUP is defined 165 * 166 * @param blob FDT blob to update 167 * @param bd_t Pointer to board data 168 * @return 0 if ok, or -FDT_ERR_... on error 169 */ 170 int ft_board_setup(void *blob, bd_t *bd); 171 172 /* 173 * The keystone2 SOC requires all 32 bit aliased addresses to be converted 174 * to their 36 physical format. This has to happen after all fdt nodes 175 * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex() 176 * called at the end of the image_setup_libfdt() is to do that convertion. 177 */ 178 void ft_board_setup_ex(void *blob, bd_t *bd); 179 void ft_cpu_setup(void *blob, bd_t *bd); 180 void ft_pci_setup(void *blob, bd_t *bd); 181 182 /** 183 * Add system-specific data to the FDT before booting the OS. 184 * 185 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. 186 * This function is called if CONFIG_OF_SYSTEM_SETUP is defined 187 * 188 * @param blob FDT blob to update 189 * @param bd_t Pointer to board data 190 * @return 0 if ok, or -FDT_ERR_... on error 191 */ 192 int ft_system_setup(void *blob, bd_t *bd); 193 194 void set_working_fdt_addr(ulong addr); 195 196 /** 197 * shrink down the given blob to minimum size + some extrasize if required 198 * 199 * @param blob FDT blob to update 200 * @param extrasize additional bytes needed 201 * @return 0 if ok, or -FDT_ERR_... on error 202 */ 203 int fdt_shrink_to_minimum(void *blob, uint extrasize); 204 int fdt_increase_size(void *fdt, int add_len); 205 206 int fdt_fixup_nor_flash_size(void *blob); 207 208 #if defined(CONFIG_FDT_FIXUP_PARTITIONS) 209 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); 210 #else 211 static inline void fdt_fixup_mtdparts(void *fdt, void *node_info, 212 int node_info_size) {} 213 #endif 214 215 void fdt_del_node_and_alias(void *blob, const char *alias); 216 u64 fdt_translate_address(const void *blob, int node_offset, 217 const __be32 *in_addr); 218 int fdt_node_offset_by_compat_reg(void *blob, const char *compat, 219 phys_addr_t compat_off); 220 int fdt_alloc_phandle(void *blob); 221 int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); 222 unsigned int fdt_create_phandle(void *fdt, int nodeoffset); 223 int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); 224 225 int fdt_verify_alias_address(void *fdt, int anode, const char *alias, 226 u64 addr); 227 u64 fdt_get_base_address(const void *fdt, int node); 228 int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr, 229 uint64_t *addr, uint64_t *len); 230 231 enum fdt_status { 232 FDT_STATUS_OKAY, 233 FDT_STATUS_DISABLED, 234 FDT_STATUS_FAIL, 235 FDT_STATUS_FAIL_ERROR_CODE, 236 }; 237 int fdt_set_node_status(void *fdt, int nodeoffset, 238 enum fdt_status status, unsigned int error_code); 239 static inline int fdt_status_okay(void *fdt, int nodeoffset) 240 { 241 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0); 242 } 243 static inline int fdt_status_disabled(void *fdt, int nodeoffset) 244 { 245 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); 246 } 247 static inline int fdt_status_fail(void *fdt, int nodeoffset) 248 { 249 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); 250 } 251 252 int fdt_set_status_by_alias(void *fdt, const char *alias, 253 enum fdt_status status, unsigned int error_code); 254 static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) 255 { 256 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); 257 } 258 static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) 259 { 260 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); 261 } 262 static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) 263 { 264 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); 265 } 266 267 /* Helper to read a big number; size is in cells (not bytes) */ 268 static inline u64 fdt_read_number(const fdt32_t *cell, int size) 269 { 270 u64 r = 0; 271 while (size--) 272 r = (r << 32) | fdt32_to_cpu(*(cell++)); 273 return r; 274 } 275 276 void fdt_support_default_count_cells(const void *blob, int parentoffset, 277 int *addrc, int *sizec); 278 int ft_verify_fdt(void *fdt); 279 int arch_fixup_memory_node(void *blob); 280 281 int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, 282 u32 height, u32 stride, const char *format); 283 284 int fdt_overlay_apply_verbose(void *fdt, void *fdto); 285 286 /** 287 * fdt_get_cells_len() - Get the length of a type of cell in top-level nodes 288 * 289 * Returns the length of the cell type in bytes (4 or 8). 290 * 291 * @blob: Pointer to device tree blob 292 * @nr_cells_name: Name to lookup, e.g. "#address-cells" 293 */ 294 int fdt_get_cells_len(const void *blob, char *nr_cells_name); 295 296 #endif /* ifdef CONFIG_OF_LIBFDT */ 297 298 #ifdef USE_HOSTCC 299 int fdtdec_get_int(const void *blob, int node, const char *prop_name, 300 int default_val); 301 #endif 302 #ifdef CONFIG_FMAN_ENET 303 int fdt_update_ethernet_dt(void *blob); 304 #endif 305 #ifdef CONFIG_FSL_MC_ENET 306 void fdt_fixup_board_enet(void *blob); 307 #endif 308 #endif /* ifndef __FDT_SUPPORT_H */ 309