1 /* 2 * (C) Copyright 2007 3 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __FDT_SUPPORT_H 9 #define __FDT_SUPPORT_H 10 11 #ifdef CONFIG_OF_LIBFDT 12 13 #include <libfdt.h> 14 15 u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, 16 const char *prop, const u32 dflt); 17 u32 fdt_getprop_u32_default(const void *fdt, const char *path, 18 const char *prop, const u32 dflt); 19 20 /** 21 * Add data to the root of the FDT before booting the OS. 22 * 23 * See doc/device-tree-bindings/root.txt 24 * 25 * @param fdt FDT address in memory 26 * @return 0 if ok, or -FDT_ERR_... on error 27 */ 28 int fdt_root(void *fdt); 29 30 /** 31 * Add chosen data the FDT before booting the OS. 32 * 33 * In particular, this adds the kernel command line (bootargs) to the FDT. 34 * 35 * @param fdt FDT address in memory 36 * @return 0 if ok, or -FDT_ERR_... on error 37 */ 38 int fdt_chosen(void *fdt); 39 40 /** 41 * Add initrd information to the FDT before booting the OS. 42 * 43 * @param fdt FDT address in memory 44 * @return 0 if ok, or -FDT_ERR_... on error 45 */ 46 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); 47 48 void do_fixup_by_path(void *fdt, const char *path, const char *prop, 49 const void *val, int len, int create); 50 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, 51 u32 val, int create); 52 53 static inline void do_fixup_by_path_string(void *fdt, const char *path, 54 const char *prop, const char *status) 55 { 56 do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1); 57 } 58 59 void do_fixup_by_prop(void *fdt, 60 const char *pname, const void *pval, int plen, 61 const char *prop, const void *val, int len, 62 int create); 63 void do_fixup_by_prop_u32(void *fdt, 64 const char *pname, const void *pval, int plen, 65 const char *prop, u32 val, int create); 66 void do_fixup_by_compat(void *fdt, const char *compat, 67 const char *prop, const void *val, int len, int create); 68 void do_fixup_by_compat_u32(void *fdt, const char *compat, 69 const char *prop, u32 val, int create); 70 /** 71 * Setup the memory node in the DT. Creates one if none was existing before. 72 * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the 73 * whole memory. 74 * 75 * @param blob FDT blob to update 76 * @param start Begin of DRAM mapping in physical memory 77 * @param size Size of the single memory bank 78 * @return 0 if ok, or -1 or -FDT_ERR_... on error 79 */ 80 int fdt_fixup_memory(void *blob, u64 start, u64 size); 81 82 /** 83 * Fill the DT memory node with multiple memory banks. 84 * Creates the node if none was existing before. 85 * If banks is 0, it will not touch the existing reg property. This allows 86 * boards to not mess with the existing DT setup, which may have been 87 * filled in properly before. 88 * 89 * @param blob FDT blob to update 90 * @param start Array of size <banks> to hold the start addresses. 91 * @param size Array of size <banks> to hold the size of each region. 92 * @param banks Number of memory banks to create. If 0, the reg 93 * property will be left untouched. 94 * @return 0 if ok, or -1 or -FDT_ERR_... on error 95 */ 96 #ifdef CONFIG_ARCH_FIXUP_FDT_MEMORY 97 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); 98 #else 99 static inline int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], 100 int banks) 101 { 102 return 0; 103 } 104 #endif 105 106 void fdt_fixup_ethernet(void *fdt); 107 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, 108 const void *val, int len, int create); 109 void fdt_fixup_qe_firmware(void *fdt); 110 111 /** 112 * Update native-mode property of display-timings node to the phandle 113 * of the timings matching a display by name (case insensitive). 114 * 115 * see kernel Documentation/devicetree/bindings/video/display-timing.txt 116 * 117 * @param blob FDT blob to update 118 * @param path path within dt 119 * @param display name of display timing to match 120 * @return 0 if ok, or -FDT_ERR_... on error 121 */ 122 int fdt_fixup_display(void *blob, const char *path, const char *display); 123 124 #if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) 125 void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd); 126 #else 127 static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {} 128 #endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */ 129 130 #if defined(CONFIG_SYS_FSL_SEC_COMPAT) 131 void fdt_fixup_crypto_node(void *blob, int sec_rev); 132 #else 133 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} 134 #endif 135 136 #ifdef CONFIG_PCI 137 #include <pci.h> 138 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); 139 #endif 140 141 int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name); 142 143 /** 144 * Add board-specific data to the FDT before booting the OS. 145 * 146 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. 147 * This function is called if CONFIG_OF_BOARD_SETUP is defined 148 * 149 * @param blob FDT blob to update 150 * @param bd_t Pointer to board data 151 * @return 0 if ok, or -FDT_ERR_... on error 152 */ 153 int ft_board_setup(void *blob, bd_t *bd); 154 155 /* 156 * The keystone2 SOC requires all 32 bit aliased addresses to be converted 157 * to their 36 physical format. This has to happen after all fdt nodes 158 * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex() 159 * called at the end of the image_setup_libfdt() is to do that convertion. 160 */ 161 void ft_board_setup_ex(void *blob, bd_t *bd); 162 void ft_cpu_setup(void *blob, bd_t *bd); 163 void ft_pci_setup(void *blob, bd_t *bd); 164 165 /** 166 * Add system-specific data to the FDT before booting the OS. 167 * 168 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. 169 * This function is called if CONFIG_OF_SYSTEM_SETUP is defined 170 * 171 * @param blob FDT blob to update 172 * @param bd_t Pointer to board data 173 * @return 0 if ok, or -FDT_ERR_... on error 174 */ 175 int ft_system_setup(void *blob, bd_t *bd); 176 177 void set_working_fdt_addr(ulong addr); 178 179 /** 180 * shrink down the given blob to minimum size + some extrasize if required 181 * 182 * @param blob FDT blob to update 183 * @param extrasize additional bytes needed 184 * @return 0 if ok, or -FDT_ERR_... on error 185 */ 186 int fdt_shrink_to_minimum(void *blob, uint extrasize); 187 int fdt_increase_size(void *fdt, int add_len); 188 189 int fdt_fixup_nor_flash_size(void *blob); 190 191 #if defined(CONFIG_FDT_FIXUP_PARTITIONS) 192 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); 193 #else 194 static inline void fdt_fixup_mtdparts(void *fdt, void *node_info, 195 int node_info_size) {} 196 #endif 197 198 void fdt_del_node_and_alias(void *blob, const char *alias); 199 u64 fdt_translate_address(const void *blob, int node_offset, 200 const __be32 *in_addr); 201 int fdt_node_offset_by_compat_reg(void *blob, const char *compat, 202 phys_addr_t compat_off); 203 int fdt_alloc_phandle(void *blob); 204 int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); 205 unsigned int fdt_create_phandle(void *fdt, int nodeoffset); 206 int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); 207 208 int fdt_verify_alias_address(void *fdt, int anode, const char *alias, 209 u64 addr); 210 u64 fdt_get_base_address(void *fdt, int node); 211 int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr, 212 uint64_t *addr, uint64_t *len); 213 214 enum fdt_status { 215 FDT_STATUS_OKAY, 216 FDT_STATUS_DISABLED, 217 FDT_STATUS_FAIL, 218 FDT_STATUS_FAIL_ERROR_CODE, 219 }; 220 int fdt_set_node_status(void *fdt, int nodeoffset, 221 enum fdt_status status, unsigned int error_code); 222 static inline int fdt_status_okay(void *fdt, int nodeoffset) 223 { 224 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0); 225 } 226 static inline int fdt_status_disabled(void *fdt, int nodeoffset) 227 { 228 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); 229 } 230 static inline int fdt_status_fail(void *fdt, int nodeoffset) 231 { 232 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); 233 } 234 235 int fdt_set_status_by_alias(void *fdt, const char *alias, 236 enum fdt_status status, unsigned int error_code); 237 static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) 238 { 239 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); 240 } 241 static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) 242 { 243 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); 244 } 245 static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) 246 { 247 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); 248 } 249 250 /* Helper to read a big number; size is in cells (not bytes) */ 251 static inline u64 of_read_number(const fdt32_t *cell, int size) 252 { 253 u64 r = 0; 254 while (size--) 255 r = (r << 32) | fdt32_to_cpu(*(cell++)); 256 return r; 257 } 258 259 void of_bus_default_count_cells(const void *blob, int parentoffset, 260 int *addrc, int *sizec); 261 int ft_verify_fdt(void *fdt); 262 int arch_fixup_memory_node(void *blob); 263 264 int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, 265 u32 height, u32 stride, const char *format); 266 267 #endif /* ifdef CONFIG_OF_LIBFDT */ 268 269 #ifdef USE_HOSTCC 270 int fdtdec_get_int(const void *blob, int node, const char *prop_name, 271 int default_val); 272 #endif 273 #endif /* ifndef __FDT_SUPPORT_H */ 274