1 /* 2 * (C) Copyright 2007 3 * Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __FDT_SUPPORT_H 9 #define __FDT_SUPPORT_H 10 11 #ifdef CONFIG_OF_LIBFDT 12 13 #include <libfdt.h> 14 15 u32 fdt_getprop_u32_default_node(const void *fdt, int off, int cell, 16 const char *prop, const u32 dflt); 17 u32 fdt_getprop_u32_default(const void *fdt, const char *path, 18 const char *prop, const u32 dflt); 19 20 /** 21 * Add data to the root of the FDT before booting the OS. 22 * 23 * See doc/device-tree-bindings/root.txt 24 * 25 * @param fdt FDT address in memory 26 * @return 0 if ok, or -FDT_ERR_... on error 27 */ 28 int fdt_root(void *fdt); 29 30 /** 31 * Add chosen data the FDT before booting the OS. 32 * 33 * In particular, this adds the kernel command line (bootargs) to the FDT. 34 * 35 * @param fdt FDT address in memory 36 * @return 0 if ok, or -FDT_ERR_... on error 37 */ 38 int fdt_chosen(void *fdt); 39 40 /** 41 * Add initrd information to the FDT before booting the OS. 42 * 43 * @param fdt FDT address in memory 44 * @return 0 if ok, or -FDT_ERR_... on error 45 */ 46 int fdt_initrd(void *fdt, ulong initrd_start, ulong initrd_end); 47 48 void do_fixup_by_path(void *fdt, const char *path, const char *prop, 49 const void *val, int len, int create); 50 void do_fixup_by_path_u32(void *fdt, const char *path, const char *prop, 51 u32 val, int create); 52 53 static inline void do_fixup_by_path_string(void *fdt, const char *path, 54 const char *prop, const char *status) 55 { 56 do_fixup_by_path(fdt, path, prop, status, strlen(status) + 1, 1); 57 } 58 59 void do_fixup_by_prop(void *fdt, 60 const char *pname, const void *pval, int plen, 61 const char *prop, const void *val, int len, 62 int create); 63 void do_fixup_by_prop_u32(void *fdt, 64 const char *pname, const void *pval, int plen, 65 const char *prop, u32 val, int create); 66 void do_fixup_by_compat(void *fdt, const char *compat, 67 const char *prop, const void *val, int len, int create); 68 void do_fixup_by_compat_u32(void *fdt, const char *compat, 69 const char *prop, u32 val, int create); 70 /** 71 * Setup the memory node in the DT. Creates one if none was existing before. 72 * Calls fdt_fixup_memory_banks() to populate a single reg pair covering the 73 * whole memory. 74 * 75 * @param blob FDT blob to update 76 * @param start Begin of DRAM mapping in physical memory 77 * @param size Size of the single memory bank 78 * @return 0 if ok, or -1 or -FDT_ERR_... on error 79 */ 80 int fdt_fixup_memory(void *blob, u64 start, u64 size); 81 82 /** 83 * Fill the DT memory node with multiple memory banks. 84 * Creates the node if none was existing before. 85 * If banks is 0, it will not touch the existing reg property. This allows 86 * boards to not mess with the existing DT setup, which may have been 87 * filled in properly before. 88 * 89 * @param blob FDT blob to update 90 * @param start Array of size <banks> to hold the start addresses. 91 * @param size Array of size <banks> to hold the size of each region. 92 * @param banks Number of memory banks to create. If 0, the reg 93 * property will be left untouched. 94 * @return 0 if ok, or -1 or -FDT_ERR_... on error 95 */ 96 int fdt_fixup_memory_banks(void *blob, u64 start[], u64 size[], int banks); 97 98 void fdt_fixup_ethernet(void *fdt); 99 int fdt_find_and_setprop(void *fdt, const char *node, const char *prop, 100 const void *val, int len, int create); 101 void fdt_fixup_qe_firmware(void *fdt); 102 103 /** 104 * Update native-mode property of display-timings node to the phandle 105 * of the timings matching a display by name (case insensitive). 106 * 107 * see kernel Documentation/devicetree/bindings/video/display-timing.txt 108 * 109 * @param blob FDT blob to update 110 * @param path path within dt 111 * @param display name of display timing to match 112 * @return 0 if ok, or -FDT_ERR_... on error 113 */ 114 int fdt_fixup_display(void *blob, const char *path, const char *display); 115 116 #if defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) 117 void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd); 118 #else 119 static inline void fsl_fdt_fixup_dr_usb(void *blob, bd_t *bd) {} 120 #endif /* defined(CONFIG_USB_EHCI_FSL) || defined(CONFIG_USB_XHCI_FSL) */ 121 122 #if defined(CONFIG_SYS_FSL_SEC_COMPAT) 123 void fdt_fixup_crypto_node(void *blob, int sec_rev); 124 #else 125 static inline void fdt_fixup_crypto_node(void *blob, int sec_rev) {} 126 #endif 127 128 #ifdef CONFIG_PCI 129 #include <pci.h> 130 int fdt_pci_dma_ranges(void *blob, int phb_off, struct pci_controller *hose); 131 #endif 132 133 int fdt_find_or_add_subnode(void *fdt, int parentoffset, const char *name); 134 135 /** 136 * Add board-specific data to the FDT before booting the OS. 137 * 138 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. 139 * This function is called if CONFIG_OF_BOARD_SETUP is defined 140 * 141 * @param blob FDT blob to update 142 * @param bd_t Pointer to board data 143 * @return 0 if ok, or -FDT_ERR_... on error 144 */ 145 int ft_board_setup(void *blob, bd_t *bd); 146 147 /* 148 * The keystone2 SOC requires all 32 bit aliased addresses to be converted 149 * to their 36 physical format. This has to happen after all fdt nodes 150 * are added or modified by the image_setup_libfdt(). The ft_board_setup_ex() 151 * called at the end of the image_setup_libfdt() is to do that convertion. 152 */ 153 void ft_board_setup_ex(void *blob, bd_t *bd); 154 void ft_cpu_setup(void *blob, bd_t *bd); 155 void ft_pci_setup(void *blob, bd_t *bd); 156 157 /** 158 * Add system-specific data to the FDT before booting the OS. 159 * 160 * Use CONFIG_SYS_FDT_PAD to ensure there is sufficient space. 161 * This function is called if CONFIG_OF_SYSTEM_SETUP is defined 162 * 163 * @param blob FDT blob to update 164 * @param bd_t Pointer to board data 165 * @return 0 if ok, or -FDT_ERR_... on error 166 */ 167 int ft_system_setup(void *blob, bd_t *bd); 168 169 void set_working_fdt_addr(ulong addr); 170 171 /** 172 * shrink down the given blob to minimum size + some extrasize if required 173 * 174 * @param blob FDT blob to update 175 * @param extrasize additional bytes needed 176 * @return 0 if ok, or -FDT_ERR_... on error 177 */ 178 int fdt_shrink_to_minimum(void *blob, uint extrasize); 179 int fdt_increase_size(void *fdt, int add_len); 180 181 int fdt_fixup_nor_flash_size(void *blob); 182 183 #if defined(CONFIG_FDT_FIXUP_PARTITIONS) 184 void fdt_fixup_mtdparts(void *fdt, void *node_info, int node_info_size); 185 #else 186 static inline void fdt_fixup_mtdparts(void *fdt, void *node_info, 187 int node_info_size) {} 188 #endif 189 190 void fdt_del_node_and_alias(void *blob, const char *alias); 191 u64 fdt_translate_address(const void *blob, int node_offset, 192 const __be32 *in_addr); 193 int fdt_node_offset_by_compat_reg(void *blob, const char *compat, 194 phys_addr_t compat_off); 195 int fdt_alloc_phandle(void *blob); 196 int fdt_set_phandle(void *fdt, int nodeoffset, uint32_t phandle); 197 unsigned int fdt_create_phandle(void *fdt, int nodeoffset); 198 int fdt_add_edid(void *blob, const char *compat, unsigned char *buf); 199 200 int fdt_verify_alias_address(void *fdt, int anode, const char *alias, 201 u64 addr); 202 u64 fdt_get_base_address(void *fdt, int node); 203 int fdt_read_range(void *fdt, int node, int n, uint64_t *child_addr, 204 uint64_t *addr, uint64_t *len); 205 206 enum fdt_status { 207 FDT_STATUS_OKAY, 208 FDT_STATUS_DISABLED, 209 FDT_STATUS_FAIL, 210 FDT_STATUS_FAIL_ERROR_CODE, 211 }; 212 int fdt_set_node_status(void *fdt, int nodeoffset, 213 enum fdt_status status, unsigned int error_code); 214 static inline int fdt_status_okay(void *fdt, int nodeoffset) 215 { 216 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_OKAY, 0); 217 } 218 static inline int fdt_status_disabled(void *fdt, int nodeoffset) 219 { 220 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_DISABLED, 0); 221 } 222 static inline int fdt_status_fail(void *fdt, int nodeoffset) 223 { 224 return fdt_set_node_status(fdt, nodeoffset, FDT_STATUS_FAIL, 0); 225 } 226 227 int fdt_set_status_by_alias(void *fdt, const char *alias, 228 enum fdt_status status, unsigned int error_code); 229 static inline int fdt_status_okay_by_alias(void *fdt, const char *alias) 230 { 231 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_OKAY, 0); 232 } 233 static inline int fdt_status_disabled_by_alias(void *fdt, const char *alias) 234 { 235 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_DISABLED, 0); 236 } 237 static inline int fdt_status_fail_by_alias(void *fdt, const char *alias) 238 { 239 return fdt_set_status_by_alias(fdt, alias, FDT_STATUS_FAIL, 0); 240 } 241 242 /* Helper to read a big number; size is in cells (not bytes) */ 243 static inline u64 of_read_number(const fdt32_t *cell, int size) 244 { 245 u64 r = 0; 246 while (size--) 247 r = (r << 32) | fdt32_to_cpu(*(cell++)); 248 return r; 249 } 250 251 void of_bus_default_count_cells(const void *blob, int parentoffset, 252 int *addrc, int *sizec); 253 int ft_verify_fdt(void *fdt); 254 int arch_fixup_memory_node(void *blob); 255 256 int fdt_setup_simplefb_node(void *fdt, int node, u64 base_address, u32 width, 257 u32 height, u32 stride, const char *format); 258 259 #endif /* ifdef CONFIG_OF_LIBFDT */ 260 261 #ifdef USE_HOSTCC 262 int fdtdec_get_int(const void *blob, int node, const char *prop_name, 263 int default_val); 264 #endif 265 #endif /* ifndef __FDT_SUPPORT_H */ 266