xref: /openbmc/u-boot/include/faraday/ftsdc010.h (revision b46694df)
1 /*
2  * Faraday FTSDC010 Secure Digital Memory Card Host Controller
3  *
4  * Copyright (C) 2011 Andes Technology Corporation
5  * Macpaul Lin, Andes Technology Corporation <macpaul@andestech.com>
6  *
7  * This program is free software; you can redistribute it and/or modify
8  * it under the terms of the GNU General Public License as published by
9  * the Free Software Foundation; either version 2 of the License, or
10  * (at your option) any later version.
11  *
12  * This program is distributed in the hope that it will be useful,
13  * but WITHOUT ANY WARRANTY; without even the implied warranty of
14  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
15  * GNU General Public License for more details.
16  *
17  * You should have received a copy of the GNU General Public License
18  * along with this program; if not, write to the Free Software
19  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
20  */
21 
22 #ifndef __FTSDC010_H
23 #define __FTSDC010_H
24 
25 #ifndef __ASSEMBLY__
26 
27 /* sd controller register */
28 struct ftsdc010_mmc {
29 	unsigned int	cmd;		/* 0x00 - command reg		*/
30 	unsigned int	argu;		/* 0x04 - argument reg		*/
31 	unsigned int	rsp0;		/* 0x08 - response reg0		*/
32 	unsigned int	rsp1;		/* 0x0c - response reg1		*/
33 	unsigned int	rsp2;		/* 0x10 - response reg2		*/
34 	unsigned int	rsp3;		/* 0x14 - response reg3		*/
35 	unsigned int	rsp_cmd;	/* 0x18 - responded cmd reg	*/
36 	unsigned int	dcr;		/* 0x1c - data control reg	*/
37 	unsigned int	dtr;		/* 0x20 - data timer reg	*/
38 	unsigned int	dlr;		/* 0x24 - data length reg	*/
39 	unsigned int	status;		/* 0x28 - status reg		*/
40 	unsigned int	clr;		/* 0x2c - clear reg		*/
41 	unsigned int	int_mask;	/* 0x30 - intrrupt mask reg	*/
42 	unsigned int	pcr;		/* 0x34 - power control reg	*/
43 	unsigned int	ccr;		/* 0x38 - clock contorl reg	*/
44 	unsigned int	bwr;		/* 0x3c - bus width reg		*/
45 	unsigned int	dwr;		/* 0x40 - data window reg	*/
46 #ifndef CONFIG_FTSDC010_SDIO
47 	unsigned int	feature;	/* 0x44 - feature reg		*/
48 	unsigned int	rev;		/* 0x48 - revision reg		*/
49 #else
50 	unsigned int	mmc_intr_time;	/* 0x44 - MMC int resp time reg	*/
51 	unsigned int	gpo;		/* 0x48 - gerenal purpose output */
52 	unsigned int	reserved[8];	/* 0x50 - 0x68 reserved		*/
53 	unsigned int	sdio_ctrl1;	/* 0x6c - SDIO control reg 1	*/
54 	unsigned int	sdio_ctrl2;	/* 0x70 - SDIO control reg 2	*/
55 	unsigned int	sdio_status;	/* 0x74 - SDIO status regi	*/
56 	unsigned int	reserved1[9];	/* 0x78 - 0x98	reserved	*/
57 	unsigned int	feature;	/* 0x9c - feature reg		*/
58 	unsigned int	rev;		/* 0xa0 - revision reg		*/
59 #endif /* CONFIG_FTSDC010_SDIO */
60 };
61 
62 struct mmc_host {
63 	struct ftsdc010_mmc *reg;
64 	unsigned int version;		/* SDHCI spec. version */
65 	unsigned int clock;		/* Current clock (MHz) */
66 	unsigned int fifo_len;		/* bytes */
67 	unsigned int last_opcode;	/* Last OP Code */
68 	unsigned int card_type;		/* Card type */
69 };
70 
71 /* functions */
72 int ftsdc010_mmc_init(int dev_index);
73 
74 #endif	/* __ASSEMBLY__ */
75 
76 /* global defines */
77 #define FTSDC010_CMD_RETRY			0x100000
78 #define FTSDC010_PIO_RETRY			100	/* pio retry times */
79 #define FTSDC010_DELAY_UNIT			100	/* 100 us */
80 
81 /* define from Linux kernel - include/linux/mmc/card.h */
82 #define MMC_TYPE_SDIO				2	/* SDIO card */
83 
84 /* define for mmc layer */
85 #define MMC_DATA_BOTH_DIR			(MMC_DATA_WRITE | MMC_DATA_READ)
86 
87 /* this part is strange */
88 #define FTSDC010_SDIO_CTRL1_REG			0x0000006C
89 #define FTSDC010_SDIO_CTRL2_REG			0x0000006C
90 #define FTSDC010_SDIO_STATUS_REG		0x00000070
91 
92 /* 0x00 - command register */
93 #define FTSDC010_CMD_IDX(x)			(((x) & 0x3f) << 0)
94 #define FTSDC010_CMD_NEED_RSP			(1 << 6)
95 #define FTSDC010_CMD_LONG_RSP			(1 << 7)
96 #define FTSDC010_CMD_APP_CMD			(1 << 8)
97 #define FTSDC010_CMD_CMD_EN			(1 << 9)
98 #define FTSDC010_CMD_SDC_RST			(1 << 10)
99 #define FTSDC010_CMD_MMC_INT_STOP		(1 << 11)
100 
101 /* 0x18 - responded command register */
102 #define FTSDC010_RSP_CMD_IDX(x)			(((x) >> 0) & 0x3f)
103 #define FTSDC010_RSP_CMD_APP			(1 << 6)
104 
105 /* 0x1c - data control register */
106 #define FTSDC010_DCR_BLK_SIZE(x)		(((x) & 0xf) << 0)
107 #define FTSDC010_DCR_DATA_WRITE			(1 << 4)
108 #define FTSDC010_DCR_DMA_EN			(1 << 5)
109 #define FTSDC010_DCR_DATA_EN			(1 << 6)
110 #ifdef CONFIG_FTSDC010_SDIO
111 #define FTSDC010_DCR_FIFOTH			(1 << 7)
112 #define FTSDC010_DCR_DMA_TYPE(x)		(((x) & 0x3) << 8)
113 #define FTSDC010_DCR_FIFO_RST			(1 << 10)
114 #endif /* CONFIG_FTSDC010_SDIO */
115 
116 #define FTSDC010_DCR_DMA_TYPE_1			0x0	/* Single r/w	*/
117 #define FTSDC010_DCR_DMA_TYPE_4			0x1	/* Burst 4 r/w	*/
118 #define FTSDC010_DCR_DMA_TYPE_8			0x2	/* Burst 8 r/w	*/
119 
120 #define FTSDC010_DCR_BLK_BYTES(x)		(ffs(x) - 1)	/* 1B - 2048B */
121 
122 /* CPRM related define */
123 #define FTSDC010_CPRM_DATA_CHANGE_ENDIAN_EN	0x000008
124 #define FTSDC010_CPRM_DATA_SWAP_HL_EN		0x000010
125 
126 /* 0x28 - status register */
127 #define FTSDC010_STATUS_RSP_CRC_FAIL		(1 << 0)
128 #define FTSDC010_STATUS_DATA_CRC_FAIL		(1 << 1)
129 #define FTSDC010_STATUS_RSP_TIMEOUT		(1 << 2)
130 #define FTSDC010_STATUS_DATA_TIMEOUT		(1 << 3)
131 #define FTSDC010_STATUS_RSP_CRC_OK		(1 << 4)
132 #define FTSDC010_STATUS_DATA_CRC_OK		(1 << 5)
133 #define FTSDC010_STATUS_CMD_SEND		(1 << 6)
134 #define FTSDC010_STATUS_DATA_END		(1 << 7)
135 #define FTSDC010_STATUS_FIFO_URUN		(1 << 8)
136 #define FTSDC010_STATUS_FIFO_ORUN		(1 << 9)
137 #define FTSDC010_STATUS_CARD_CHANGE		(1 << 10)
138 #define FTSDC010_STATUS_CARD_DETECT		(1 << 11)
139 #define FTSDC010_STATUS_WRITE_PROT		(1 << 12)
140 #ifdef CONFIG_FTSDC010_SDIO
141 #define FTSDC010_STATUS_CP_READY		(1 << 13) /* reserved ? */
142 #define FTSDC010_STATUS_CP_BUF_READY		(1 << 14) /* reserved ? */
143 #define FTSDC010_STATUS_PLAIN_TEXT_READY	(1 << 15) /* reserved ? */
144 #define FTSDC010_STATUS_SDIO_IRPT		(1 << 16) /* SDIO card intr */
145 #define FTSDC010_STATUS_DATA0_STATUS		(1 << 17)
146 #endif /* CONFIG_FTSDC010_SDIO */
147 #define FTSDC010_STATUS_RSP_ERROR	\
148 	(FTSDC010_STATUS_RSP_CRC_FAIL | FTSDC010_STATUS_RSP_TIMEOUT)
149 #define FTSDC010_STATUS_RSP_MASK	\
150 	(FTSDC010_STATUS_RSP_ERROR | FTSDC010_STATUS_RSP_CRC_OK)
151 #define FTSDC010_STATUS_DATA_ERROR	\
152 	(FTSDC010_STATUS_DATA_CRC_FAIL | FTSDC010_STATUS_DATA_TIMEOUT)
153 #define FTSDC010_STATUS_DATA_MASK	\
154 	(FTSDC010_STATUS_DATA_ERROR | FTSDC010_STATUS_DATA_CRC_OK \
155 	| FTSDC010_STATUS_DATA_END)
156 
157 /* 0x2c - clear register */
158 #define FTSDC010_CLR_RSP_CRC_FAIL		(1 << 0)
159 #define FTSDC010_CLR_DATA_CRC_FAIL		(1 << 1)
160 #define FTSDC010_CLR_RSP_TIMEOUT		(1 << 2)
161 #define FTSDC010_CLR_DATA_TIMEOUT		(1 << 3)
162 #define FTSDC010_CLR_RSP_CRC_OK			(1 << 4)
163 #define FTSDC010_CLR_DATA_CRC_OK		(1 << 5)
164 #define FTSDC010_CLR_CMD_SEND			(1 << 6)
165 #define FTSDC010_CLR_DATA_END			(1 << 7)
166 #define FTSDC010_STATUS_FIFO_URUN		(1 << 8) /* reserved ? */
167 #define FTSDC010_STATUS_FIFO_ORUN		(1 << 9) /* reserved ? */
168 #define FTSDC010_CLR_CARD_CHANGE		(1 << 10)
169 #ifdef CONFIG_FTSDC010_SDIO
170 #define FTSDC010_CLR_SDIO_IRPT			(1 << 16)
171 #endif /* CONFIG_FTSDC010_SDIO */
172 
173 /* 0x30 - interrupt mask register */
174 #define FTSDC010_INT_MASK_RSP_CRC_FAIL		(1 << 0)
175 #define FTSDC010_INT_MASK_DATA_CRC_FAIL		(1 << 1)
176 #define FTSDC010_INT_MASK_RSP_TIMEOUT		(1 << 2)
177 #define FTSDC010_INT_MASK_DATA_TIMEOUT		(1 << 3)
178 #define FTSDC010_INT_MASK_RSP_CRC_OK		(1 << 4)
179 #define FTSDC010_INT_MASK_DATA_CRC_OK		(1 << 5)
180 #define FTSDC010_INT_MASK_CMD_SEND		(1 << 6)
181 #define FTSDC010_INT_MASK_DATA_END		(1 << 7)
182 #define FTSDC010_INT_MASK_FIFO_URUN		(1 << 8)
183 #define FTSDC010_INT_MASK_FIFO_ORUN		(1 << 9)
184 #define FTSDC010_INT_MASK_CARD_CHANGE		(1 << 10)
185 #ifdef CONFIG_FTSDC010_SDIO
186 #define FTSDC010_INT_MASK_CP_READY		(1 << 13)
187 #define FTSDC010_INT_MASK_CP_BUF_READY		(1 << 14)
188 #define FTSDC010_INT_MASK_PLAIN_TEXT_READY	(1 << 15)
189 #define FTSDC010_INT_MASK_SDIO_IRPT		(1 << 16)
190 #define FTSDC010_STATUS_DATA0_STATUS		(1 << 17)
191 #endif /* CONFIG_FTSDC010_SDIO */
192 
193 /* ? */
194 #define FTSDC010_CARD_INSERT			0x0
195 #define FTSDC010_CARD_REMOVE			FTSDC010_STATUS_REG_CARD_DETECT
196 
197 /* 0x34 - power control register */
198 #define FTSDC010_PCR_POWER(x)			(((x) & 0xf) << 0)
199 #define FTSDC010_PCR_POWER_ON			(1 << 4)
200 
201 /* 0x38 - clock control register */
202 #define FTSDC010_CCR_CLK_DIV(x)			(((x) & 0x7f) << 0)
203 #define FTSDC010_CCR_CLK_SD			(1 << 7) /* 0: MMC, 1: SD */
204 #define FTSDC010_CCR_CLK_DIS			(1 << 8)
205 #define FTSDC010_CCR_CLK_HISPD			(1 << 9) /* high speed */
206 
207 /* card type */
208 #define FTSDC010_CARD_TYPE_SD			FTSDC010_CLOCK_REG_CARD_TYPE
209 #define FTSDC010_CARD_TYPE_MMC			0x0
210 
211 /* 0x3c - bus width register */
212 #define FTSDC010_BWR_MODE_1BIT      (1 << 0) /* 1 bit mode enabled */
213 #define FTSDC010_BWR_MODE_8BIT      (1 << 1) /* 8 bit mode enabled */
214 #define FTSDC010_BWR_MODE_4BIT      (1 << 2) /* 4 bit mode enabled */
215 #define FTSDC010_BWR_MODE_MASK      (7 << 0)
216 #define FTSDC010_BWR_MODE_SHIFT     (0)
217 #define FTSDC010_BWR_CAPS_1BIT      (0 << 3) /* 1 bits mode supported */
218 #define FTSDC010_BWR_CAPS_4BIT      (1 << 3) /* 1,4 bits mode supported */
219 #define FTSDC010_BWR_CAPS_8BIT      (2 << 3) /* 1,4,8 bits mode supported */
220 #define FTSDC010_BWR_CAPS_MASK      (3 << 3)
221 #define FTSDC010_BWR_CAPS_SHIFT     (3)
222 #define FTSDC010_BWR_CARD_DETECT    (1 << 5)
223 
224 /* 0x44 or 0x9c - feature register */
225 #define FTSDC010_FEATURE_FIFO_DEPTH(x)		(((x) >> 0) & 0xff)
226 #define FTSDC010_FEATURE_CPRM_FUNCTION		(1 << 8)
227 
228 #define FTSDC010_FIFO_DEPTH_4			0x04
229 #define FTSDC010_FIFO_DEPTH_8			0x08
230 #define FTSDC010_FIFO_DEPTH_16			0x10
231 
232 /* 0x48 or 0xa0 - revision register */
233 #define FTSDC010_REV_REVISION(x)		(((x) & 0xff) >> 0)
234 #define FTSDC010_REV_MINOR(x)			(((x) & 0xff00) >> 8)
235 #define FTSDC010_REV_MAJOR(x)			(((x) & 0xffff0000) >> 16)
236 
237 #ifdef CONFIG_FTSDC010_SDIO
238 /* 0x44 - general purpose output */
239 #define FTSDC010_GPO_PORT(x)			(((x) & 0xf) << 0)
240 
241 /* 0x6c - sdio control register 1 */
242 #define FTSDC010_SDIO_CTRL1_SDIO_BLK_SIZE(x)	(((x) & 0xfff) << 0)
243 #define FTSDC010_SDIO_CTRL1_SDIO_BLK_MODE	(1 << 12)
244 #define FTSDC010_SDIO_CTRL1_READ_WAIT_EN	(1 << 13)
245 #define FTSDC010_SDIO_CTRL1_SDIO_ENABLE		(1 << 14)
246 #define FTSDC010_SDIO_CTRL1_SDIO_BLK_NO(x)	(((x) & 0x1ff) << 15)
247 
248 /* 0x70 - sdio control register 2 */
249 #define FTSDC010_SDIO_CTRL2_SUSP_READ_WAIT	(1 << 0)
250 #define FTSDC010_SDIO_CTRL2_SUSP_CMD_ABORT	(1 << 1)
251 
252 /* 0x74 - sdio status register */
253 #define FTSDC010_SDIO_STATUS_SDIO_BLK_CNT(x)	(((x) >> 0) & 0x1ffff)
254 #define FTSDC010_SDIO_STATUS_FIFO_REMAIN_NO(x)	(((x) >> 17) & 0xef)
255 
256 #endif /* CONFIG_FTSDC010_SDIO */
257 
258 #endif /* __FTSDC010_H */
259