1 /* 2 * (C) Copyright 2002 3 * Wolfgang Denk, DENX Software Engineering, wd@denx.de. 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _ENVIRONMENT_H_ 9 #define _ENVIRONMENT_H_ 10 11 #include <linux/kconfig.h> 12 13 /************************************************************************** 14 * 15 * The "environment" is stored as a list of '\0' terminated 16 * "name=value" strings. The end of the list is marked by a double 17 * '\0'. New entries are always added at the end. Deleting an entry 18 * shifts the remaining entries to the front. Replacing an entry is a 19 * combination of deleting the old value and adding the new one. 20 * 21 * The environment is preceded by a 32 bit CRC over the data part. 22 * 23 *************************************************************************/ 24 25 #if defined(CONFIG_ENV_IS_IN_FLASH) 26 # ifndef CONFIG_ENV_ADDR 27 # define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET) 28 # endif 29 # ifndef CONFIG_ENV_OFFSET 30 # define CONFIG_ENV_OFFSET (CONFIG_ENV_ADDR - CONFIG_SYS_FLASH_BASE) 31 # endif 32 # if !defined(CONFIG_ENV_ADDR_REDUND) && defined(CONFIG_ENV_OFFSET_REDUND) 33 # define CONFIG_ENV_ADDR_REDUND \ 34 (CONFIG_SYS_FLASH_BASE + CONFIG_ENV_OFFSET_REDUND) 35 # endif 36 # if defined(CONFIG_ENV_SECT_SIZE) || defined(CONFIG_ENV_SIZE) 37 # ifndef CONFIG_ENV_SECT_SIZE 38 # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE 39 # endif 40 # ifndef CONFIG_ENV_SIZE 41 # define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE 42 # endif 43 # else 44 # error "Both CONFIG_ENV_SECT_SIZE and CONFIG_ENV_SIZE undefined" 45 # endif 46 # if defined(CONFIG_ENV_ADDR_REDUND) && !defined(CONFIG_ENV_SIZE_REDUND) 47 # define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 48 # endif 49 # if (CONFIG_ENV_ADDR >= CONFIG_SYS_MONITOR_BASE) && \ 50 (CONFIG_ENV_ADDR + CONFIG_ENV_SIZE) <= \ 51 (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN) 52 # define ENV_IS_EMBEDDED 53 # endif 54 # if defined(CONFIG_ENV_ADDR_REDUND) || defined(CONFIG_ENV_OFFSET_REDUND) 55 # define CONFIG_SYS_REDUNDAND_ENVIRONMENT 56 # endif 57 # ifdef CONFIG_ENV_IS_EMBEDDED 58 # error "do not define CONFIG_ENV_IS_EMBEDDED in your board config" 59 # error "it is calculated automatically for you" 60 # endif 61 #endif /* CONFIG_ENV_IS_IN_FLASH */ 62 63 #if defined(CONFIG_ENV_IS_IN_MMC) 64 # ifdef CONFIG_ENV_OFFSET_REDUND 65 # define CONFIG_SYS_REDUNDAND_ENVIRONMENT 66 # endif 67 #endif 68 69 #if defined(CONFIG_ENV_IS_IN_NAND) 70 # if defined(CONFIG_ENV_OFFSET_OOB) 71 # ifdef CONFIG_ENV_OFFSET_REDUND 72 # error "CONFIG_ENV_OFFSET_REDUND is not supported when CONFIG_ENV_OFFSET_OOB" 73 # error "is set" 74 # endif 75 extern unsigned long nand_env_oob_offset; 76 # define CONFIG_ENV_OFFSET nand_env_oob_offset 77 # else 78 # ifndef CONFIG_ENV_OFFSET 79 # error "Need to define CONFIG_ENV_OFFSET when using CONFIG_ENV_IS_IN_NAND" 80 # endif 81 # ifdef CONFIG_ENV_OFFSET_REDUND 82 # define CONFIG_SYS_REDUNDAND_ENVIRONMENT 83 # endif 84 # endif /* CONFIG_ENV_OFFSET_OOB */ 85 # ifndef CONFIG_ENV_SIZE 86 # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_NAND" 87 # endif 88 #endif /* CONFIG_ENV_IS_IN_NAND */ 89 90 #if defined(CONFIG_ENV_IS_IN_UBI) 91 # ifndef CONFIG_ENV_UBI_PART 92 # error "Need to define CONFIG_ENV_UBI_PART when using CONFIG_ENV_IS_IN_UBI" 93 # endif 94 # ifndef CONFIG_ENV_UBI_VOLUME 95 # error "Need to define CONFIG_ENV_UBI_VOLUME when using CONFIG_ENV_IS_IN_UBI" 96 # endif 97 # if defined(CONFIG_ENV_UBI_VOLUME_REDUND) 98 # define CONFIG_SYS_REDUNDAND_ENVIRONMENT 99 # endif 100 # ifndef CONFIG_ENV_SIZE 101 # error "Need to define CONFIG_ENV_SIZE when using CONFIG_ENV_IS_IN_UBI" 102 # endif 103 # ifndef CONFIG_CMD_UBI 104 # error "Need to define CONFIG_CMD_UBI when using CONFIG_ENV_IS_IN_UBI" 105 # endif 106 #endif /* CONFIG_ENV_IS_IN_UBI */ 107 108 /* Embedded env is only supported for some flash types */ 109 #ifdef CONFIG_ENV_IS_EMBEDDED 110 # if !defined(CONFIG_ENV_IS_IN_FLASH) && \ 111 !defined(CONFIG_ENV_IS_IN_NAND) && \ 112 !defined(CONFIG_ENV_IS_IN_ONENAND) && \ 113 !defined(CONFIG_ENV_IS_IN_SPI_FLASH) 114 # error "CONFIG_ENV_IS_EMBEDDED not supported for your flash type" 115 # endif 116 #endif 117 118 /* 119 * For the flash types where embedded env is supported, but it cannot be 120 * calculated automatically (i.e. NAND), take the board opt-in. 121 */ 122 #if defined(CONFIG_ENV_IS_EMBEDDED) && !defined(ENV_IS_EMBEDDED) 123 # define ENV_IS_EMBEDDED 124 #endif 125 126 /* The build system likes to know if the env is embedded */ 127 #ifdef DO_DEPS_ONLY 128 # ifdef ENV_IS_EMBEDDED 129 # ifndef CONFIG_ENV_IS_EMBEDDED 130 # define CONFIG_ENV_IS_EMBEDDED 131 # endif 132 # endif 133 #endif 134 135 #include "compiler.h" 136 137 #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT 138 # define ENV_HEADER_SIZE (sizeof(uint32_t) + 1) 139 140 # define ACTIVE_FLAG 1 141 # define OBSOLETE_FLAG 0 142 #else 143 # define ENV_HEADER_SIZE (sizeof(uint32_t)) 144 #endif 145 146 #define ENV_SIZE (CONFIG_ENV_SIZE - ENV_HEADER_SIZE) 147 148 typedef struct environment_s { 149 uint32_t crc; /* CRC32 over data bytes */ 150 #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT 151 unsigned char flags; /* active/obsolete flags */ 152 #endif 153 unsigned char data[ENV_SIZE]; /* Environment data */ 154 } env_t; 155 156 #ifdef ENV_IS_EMBEDDED 157 extern env_t environment; 158 #endif /* ENV_IS_EMBEDDED */ 159 160 extern const unsigned char default_environment[]; 161 extern env_t *env_ptr; 162 163 #if defined(CONFIG_NEEDS_MANUAL_RELOC) 164 extern void env_reloc(void); 165 #endif 166 167 #ifdef CONFIG_ENV_IS_IN_MMC 168 #include <mmc.h> 169 170 extern int mmc_get_env_addr(struct mmc *mmc, int copy, u32 *env_addr); 171 # ifdef CONFIG_SYS_MMC_ENV_PART 172 extern uint mmc_get_env_part(struct mmc *mmc); 173 # endif 174 #endif 175 176 #ifndef DO_DEPS_ONLY 177 178 #include <env_attr.h> 179 #include <env_callback.h> 180 #include <env_flags.h> 181 #include <search.h> 182 183 /* Value for environment validity */ 184 enum env_valid { 185 ENV_INVALID, /* No valid environment */ 186 ENV_VALID, /* First or only environment is valid */ 187 ENV_REDUND, /* Redundant environment is valid */ 188 }; 189 190 enum env_location { 191 ENVL_EEPROM, 192 ENVL_EXT4, 193 ENVL_FAT, 194 ENVL_FLASH, 195 ENVL_MMC, 196 ENVL_NAND, 197 ENVL_NVRAM, 198 ENVL_ONENAND, 199 ENVL_REMOTE, 200 ENVL_SPI_FLASH, 201 ENVL_UBI, 202 ENVL_NOWHERE, 203 204 ENVL_COUNT, 205 ENVL_UNKNOWN, 206 }; 207 208 /* value for the various operations we want to perform on the env */ 209 enum env_operation { 210 ENVOP_GET_CHAR, /* we want to call the get_char function */ 211 ENVOP_INIT, /* we want to call the init function */ 212 ENVOP_LOAD, /* we want to call the load function */ 213 ENVOP_SAVE, /* we want to call the save function */ 214 }; 215 216 struct env_driver { 217 const char *name; 218 enum env_location location; 219 220 /** 221 * get_char() - Read a character from the environment 222 * 223 * This method is optional. If not provided, a default implementation 224 * will read from gd->env_addr. 225 * 226 * @index: Index of character to read (0=first) 227 * @return character read, or -ve on error 228 */ 229 int (*get_char)(int index); 230 231 /** 232 * load() - Load the environment from storage 233 * 234 * This method is optional. If not provided, no environment will be 235 * loaded. 236 * 237 * @return 0 if OK, -ve on error 238 */ 239 int (*load)(void); 240 241 /** 242 * save() - Save the environment to storage 243 * 244 * This method is required for 'saveenv' to work. 245 * 246 * @return 0 if OK, -ve on error 247 */ 248 int (*save)(void); 249 250 /** 251 * init() - Set up the initial pre-relocation environment 252 * 253 * This method is optional. 254 * 255 * @return 0 if OK, -ENOENT if no initial environment could be found, 256 * other -ve on error 257 */ 258 int (*init)(void); 259 }; 260 261 /* Declare a new environment location driver */ 262 #define U_BOOT_ENV_LOCATION(__name) \ 263 ll_entry_declare(struct env_driver, __name, env_driver) 264 265 /* Declare the name of a location */ 266 #ifdef CONFIG_CMD_SAVEENV 267 #define ENV_NAME(_name) .name = _name, 268 #else 269 #define ENV_NAME(_name) 270 #endif 271 272 #ifdef CONFIG_CMD_SAVEENV 273 #define env_save_ptr(x) x 274 #else 275 #define env_save_ptr(x) NULL 276 #endif 277 278 extern struct hsearch_data env_htab; 279 280 /* Function that updates CRC of the enironment */ 281 void env_crc_update(void); 282 283 /* Look up the variable from the default environment */ 284 char *env_get_default(const char *name); 285 286 /* [re]set to the default environment */ 287 void set_default_env(const char *s); 288 289 /* [re]set individual variables to their value in the default environment */ 290 int set_default_vars(int nvars, char * const vars[]); 291 292 /* Import from binary representation into hash table */ 293 int env_import(const char *buf, int check); 294 295 /* Export from hash table into binary representation */ 296 int env_export(env_t *env_out); 297 298 #ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT 299 /* Select and import one of two redundant environments */ 300 int env_import_redund(const char *buf1, int buf1_status, 301 const char *buf2, int buf2_status); 302 #endif 303 304 /** 305 * env_get_char() - Get a character from the early environment 306 * 307 * This reads from the pre-relocation environemnt 308 * 309 * @index: Index of character to read (0 = first) 310 * @return character read, or -ve on error 311 */ 312 int env_get_char(int index); 313 314 /** 315 * env_load() - Load the environment from storage 316 * 317 * @return 0 if OK, -ve on error 318 */ 319 int env_load(void); 320 321 /** 322 * env_save() - Save the environment to storage 323 * 324 * @return 0 if OK, -ve on error 325 */ 326 int env_save(void); 327 328 #endif /* DO_DEPS_ONLY */ 329 330 #endif /* _ENVIRONMENT_H_ */ 331