1 /* 2 * (C) Copyright 2012 SAMSUNG Electronics 3 * Jaehoon Chung <jh80.chung@samsung.com> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef __DWMMC_HW_H 9 #define __DWMMC_HW_H 10 11 #include <asm/io.h> 12 #include <mmc.h> 13 14 #define DWMCI_CTRL 0x000 15 #define DWMCI_PWREN 0x004 16 #define DWMCI_CLKDIV 0x008 17 #define DWMCI_CLKSRC 0x00C 18 #define DWMCI_CLKENA 0x010 19 #define DWMCI_TMOUT 0x014 20 #define DWMCI_CTYPE 0x018 21 #define DWMCI_BLKSIZ 0x01C 22 #define DWMCI_BYTCNT 0x020 23 #define DWMCI_INTMASK 0x024 24 #define DWMCI_CMDARG 0x028 25 #define DWMCI_CMD 0x02C 26 #define DWMCI_RESP0 0x030 27 #define DWMCI_RESP1 0x034 28 #define DWMCI_RESP2 0x038 29 #define DWMCI_RESP3 0x03C 30 #define DWMCI_MINTSTS 0x040 31 #define DWMCI_RINTSTS 0x044 32 #define DWMCI_STATUS 0x048 33 #define DWMCI_FIFOTH 0x04C 34 #define DWMCI_CDETECT 0x050 35 #define DWMCI_WRTPRT 0x054 36 #define DWMCI_GPIO 0x058 37 #define DWMCI_TCMCNT 0x05C 38 #define DWMCI_TBBCNT 0x060 39 #define DWMCI_DEBNCE 0x064 40 #define DWMCI_USRID 0x068 41 #define DWMCI_VERID 0x06C 42 #define DWMCI_HCON 0x070 43 #define DWMCI_UHS_REG 0x074 44 #define DWMCI_BMOD 0x080 45 #define DWMCI_PLDMND 0x084 46 #define DWMCI_DBADDR 0x088 47 #define DWMCI_IDSTS 0x08C 48 #define DWMCI_IDINTEN 0x090 49 #define DWMCI_DSCADDR 0x094 50 #define DWMCI_BUFADDR 0x098 51 #define DWMCI_DATA 0x200 52 53 /* Interrupt Mask register */ 54 #define DWMCI_INTMSK_ALL 0xffffffff 55 #define DWMCI_INTMSK_RE (1 << 1) 56 #define DWMCI_INTMSK_CDONE (1 << 2) 57 #define DWMCI_INTMSK_DTO (1 << 3) 58 #define DWMCI_INTMSK_TXDR (1 << 4) 59 #define DWMCI_INTMSK_RXDR (1 << 5) 60 #define DWMCI_INTMSK_DCRC (1 << 7) 61 #define DWMCI_INTMSK_RTO (1 << 8) 62 #define DWMCI_INTMSK_DRTO (1 << 9) 63 #define DWMCI_INTMSK_HTO (1 << 10) 64 #define DWMCI_INTMSK_FRUN (1 << 11) 65 #define DWMCI_INTMSK_HLE (1 << 12) 66 #define DWMCI_INTMSK_SBE (1 << 13) 67 #define DWMCI_INTMSK_ACD (1 << 14) 68 #define DWMCI_INTMSK_EBE (1 << 15) 69 70 /* Raw interrupt Regsiter */ 71 #define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\ 72 DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC) 73 #define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO) 74 /* CTRL register */ 75 #define DWMCI_CTRL_RESET (1 << 0) 76 #define DWMCI_CTRL_FIFO_RESET (1 << 1) 77 #define DWMCI_CTRL_DMA_RESET (1 << 2) 78 #define DWMCI_DMA_EN (1 << 5) 79 #define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) 80 #define DWMCI_IDMAC_EN (1 << 25) 81 #define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\ 82 DWMCI_CTRL_DMA_RESET) 83 84 /* CMD register */ 85 #define DWMCI_CMD_RESP_EXP (1 << 6) 86 #define DWMCI_CMD_RESP_LENGTH (1 << 7) 87 #define DWMCI_CMD_CHECK_CRC (1 << 8) 88 #define DWMCI_CMD_DATA_EXP (1 << 9) 89 #define DWMCI_CMD_RW (1 << 10) 90 #define DWMCI_CMD_SEND_STOP (1 << 12) 91 #define DWMCI_CMD_ABORT_STOP (1 << 14) 92 #define DWMCI_CMD_PRV_DAT_WAIT (1 << 13) 93 #define DWMCI_CMD_UPD_CLK (1 << 21) 94 #define DWMCI_CMD_USE_HOLD_REG (1 << 29) 95 #define DWMCI_CMD_START (1 << 31) 96 97 /* CLKENA register */ 98 #define DWMCI_CLKEN_ENABLE (1 << 0) 99 #define DWMCI_CLKEN_LOW_PWR (1 << 16) 100 101 /* Card-type registe */ 102 #define DWMCI_CTYPE_1BIT 0 103 #define DWMCI_CTYPE_4BIT (1 << 0) 104 #define DWMCI_CTYPE_8BIT (1 << 16) 105 106 /* Status Register */ 107 #define DWMCI_BUSY (1 << 9) 108 #define DWMCI_FIFO_MASK 0x1fff 109 #define DWMCI_FIFO_SHIFT 17 110 111 /* FIFOTH Register */ 112 #define MSIZE(x) ((x) << 28) 113 #define RX_WMARK(x) ((x) << 16) 114 #define TX_WMARK(x) (x) 115 #define RX_WMARK_SHIFT 16 116 #define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT) 117 118 #define DWMCI_IDMAC_OWN (1 << 31) 119 #define DWMCI_IDMAC_CH (1 << 4) 120 #define DWMCI_IDMAC_FS (1 << 3) 121 #define DWMCI_IDMAC_LD (1 << 2) 122 123 /* Bus Mode Register */ 124 #define DWMCI_BMOD_IDMAC_RESET (1 << 0) 125 #define DWMCI_BMOD_IDMAC_FB (1 << 1) 126 #define DWMCI_BMOD_IDMAC_EN (1 << 7) 127 128 /* UHS register */ 129 #define DWMCI_DDR_MODE (1 << 16) 130 131 /* quirks */ 132 #define DWMCI_QUIRK_DISABLE_SMU (1 << 0) 133 134 /** 135 * struct dwmci_host - Information about a designware MMC host 136 * 137 * @name: Device name 138 * @ioaddr: Base I/O address of controller 139 * @quirks: Quick flags - see DWMCI_QUIRK_... 140 * @caps: Capabilities - see MMC_MODE_... 141 * @bus_hz: Bus speed in Hz, if @get_mmc_clk() is NULL 142 * @div: Arbitrary clock divider value for use by controller 143 * @dev_index: Arbitrary device index for use by controller 144 * @dev_id: Arbitrary device ID for use by controller 145 * @buswidth: Bus width in bits (8 or 4) 146 * @fifoth_val: Value for FIFOTH register (or 0 to leave unset) 147 * @mmc: Pointer to generic MMC structure for this device 148 * @priv: Private pointer for use by controller 149 */ 150 struct dwmci_host { 151 const char *name; 152 void *ioaddr; 153 unsigned int quirks; 154 unsigned int caps; 155 unsigned int version; 156 unsigned int clock; 157 unsigned int bus_hz; 158 unsigned int div; 159 int dev_index; 160 int dev_id; 161 int buswidth; 162 u32 fifoth_val; 163 struct mmc *mmc; 164 void *priv; 165 166 void (*clksel)(struct dwmci_host *host); 167 void (*board_init)(struct dwmci_host *host); 168 169 /** 170 * Get / set a particular MMC clock frequency 171 * 172 * This is used to request the current clock frequency of the clock 173 * that drives the DWMMC peripheral. The caller will then use this 174 * information to work out the divider it needs to achieve the 175 * required MMC bus clock frequency. If you want to handle the 176 * clock external to DWMMC, use @freq to select the frequency and 177 * return that value too. Then DWMMC will put itself in bypass mode. 178 * 179 * @host: DWMMC host 180 * @freq: Frequency the host is trying to achieve 181 */ 182 unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq); 183 #ifndef CONFIG_BLK 184 struct mmc_config cfg; 185 #endif 186 187 /* use fifo mode to read and write data */ 188 bool fifo_mode; 189 }; 190 191 struct dwmci_idmac { 192 u32 flags; 193 u32 cnt; 194 u32 addr; 195 u32 next_addr; 196 } __aligned(ARCH_DMA_MINALIGN); 197 198 static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val) 199 { 200 writel(val, host->ioaddr + reg); 201 } 202 203 static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val) 204 { 205 writew(val, host->ioaddr + reg); 206 } 207 208 static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val) 209 { 210 writeb(val, host->ioaddr + reg); 211 } 212 static inline u32 dwmci_readl(struct dwmci_host *host, int reg) 213 { 214 return readl(host->ioaddr + reg); 215 } 216 217 static inline u16 dwmci_readw(struct dwmci_host *host, int reg) 218 { 219 return readw(host->ioaddr + reg); 220 } 221 222 static inline u8 dwmci_readb(struct dwmci_host *host, int reg) 223 { 224 return readb(host->ioaddr + reg); 225 } 226 227 #ifdef CONFIG_BLK 228 /** 229 * dwmci_setup_cfg() - Set up the configuration for DWMMC 230 * 231 * This is used to set up a DWMMC device when you are using CONFIG_BLK. 232 * 233 * This should be called from your MMC driver's probe() method once you have 234 * the information required. 235 * 236 * Generally your driver will have a platform data structure which holds both 237 * the configuration (struct mmc_config) and the MMC device info (struct mmc). 238 * For example: 239 * 240 * struct rockchip_mmc_plat { 241 * struct mmc_config cfg; 242 * struct mmc mmc; 243 * }; 244 * 245 * ... 246 * 247 * Inside U_BOOT_DRIVER(): 248 * .platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat), 249 * 250 * To access platform data: 251 * struct rockchip_mmc_plat *plat = dev_get_platdata(dev); 252 * 253 * See rockchip_dw_mmc.c for an example. 254 * 255 * @cfg: Configuration structure to fill in (generally &plat->mmc) 256 * @name: Device name (normally dev->name) 257 * @buswidth: Bus width (in bits, such as 4 or 8) 258 * @caps: Host capabilities (MMC_MODE_...) 259 * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) 260 * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) 261 */ 262 void dwmci_setup_cfg(struct mmc_config *cfg, const char *name, int buswidth, 263 uint caps, u32 max_clk, u32 min_clk); 264 265 /** 266 * dwmci_bind() - Set up a new MMC block device 267 * 268 * This is used to set up a DWMMC block device when you are using CONFIG_BLK. 269 * It should be called from your driver's bind() method. 270 * 271 * See rockchip_dw_mmc.c for an example. 272 * 273 * @dev: Device to set up 274 * @mmc: Pointer to mmc structure (normally &plat->mmc) 275 * @cfg: Empty configuration structure (generally &plat->cfg). This is 276 * normally all zeroes at this point. The only purpose of passing 277 * this in is to set mmc->cfg to it. 278 * @return 0 if OK, -ve if the block device could not be created 279 */ 280 int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); 281 282 #else 283 /** 284 * add_dwmci() - Add a new DWMMC interface 285 * 286 * This is used when you are not using CONFIG_BLK. Convert your driver over! 287 * 288 * @host: DWMMC host structure 289 * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) 290 * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) 291 * @return 0 if OK, -ve on error 292 */ 293 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); 294 #endif /* !CONFIG_BLK */ 295 296 #ifdef CONFIG_DM_MMC_OPS 297 /* Export the operations to drivers */ 298 int dwmci_probe(struct udevice *dev); 299 extern const struct dm_mmc_ops dm_dwmci_ops; 300 #endif 301 302 #endif /* __DWMMC_HW_H */ 303