1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * (C) Copyright 2012 SAMSUNG Electronics 4 * Jaehoon Chung <jh80.chung@samsung.com> 5 */ 6 7 #ifndef __DWMMC_HW_H 8 #define __DWMMC_HW_H 9 10 #include <asm/io.h> 11 #include <mmc.h> 12 13 #define DWMCI_CTRL 0x000 14 #define DWMCI_PWREN 0x004 15 #define DWMCI_CLKDIV 0x008 16 #define DWMCI_CLKSRC 0x00C 17 #define DWMCI_CLKENA 0x010 18 #define DWMCI_TMOUT 0x014 19 #define DWMCI_CTYPE 0x018 20 #define DWMCI_BLKSIZ 0x01C 21 #define DWMCI_BYTCNT 0x020 22 #define DWMCI_INTMASK 0x024 23 #define DWMCI_CMDARG 0x028 24 #define DWMCI_CMD 0x02C 25 #define DWMCI_RESP0 0x030 26 #define DWMCI_RESP1 0x034 27 #define DWMCI_RESP2 0x038 28 #define DWMCI_RESP3 0x03C 29 #define DWMCI_MINTSTS 0x040 30 #define DWMCI_RINTSTS 0x044 31 #define DWMCI_STATUS 0x048 32 #define DWMCI_FIFOTH 0x04C 33 #define DWMCI_CDETECT 0x050 34 #define DWMCI_WRTPRT 0x054 35 #define DWMCI_GPIO 0x058 36 #define DWMCI_TCMCNT 0x05C 37 #define DWMCI_TBBCNT 0x060 38 #define DWMCI_DEBNCE 0x064 39 #define DWMCI_USRID 0x068 40 #define DWMCI_VERID 0x06C 41 #define DWMCI_HCON 0x070 42 #define DWMCI_UHS_REG 0x074 43 #define DWMCI_BMOD 0x080 44 #define DWMCI_PLDMND 0x084 45 #define DWMCI_DBADDR 0x088 46 #define DWMCI_IDSTS 0x08C 47 #define DWMCI_IDINTEN 0x090 48 #define DWMCI_DSCADDR 0x094 49 #define DWMCI_BUFADDR 0x098 50 #define DWMCI_DATA 0x200 51 52 /* Interrupt Mask register */ 53 #define DWMCI_INTMSK_ALL 0xffffffff 54 #define DWMCI_INTMSK_RE (1 << 1) 55 #define DWMCI_INTMSK_CDONE (1 << 2) 56 #define DWMCI_INTMSK_DTO (1 << 3) 57 #define DWMCI_INTMSK_TXDR (1 << 4) 58 #define DWMCI_INTMSK_RXDR (1 << 5) 59 #define DWMCI_INTMSK_RCRC (1 << 6) 60 #define DWMCI_INTMSK_DCRC (1 << 7) 61 #define DWMCI_INTMSK_RTO (1 << 8) 62 #define DWMCI_INTMSK_DRTO (1 << 9) 63 #define DWMCI_INTMSK_HTO (1 << 10) 64 #define DWMCI_INTMSK_FRUN (1 << 11) 65 #define DWMCI_INTMSK_HLE (1 << 12) 66 #define DWMCI_INTMSK_SBE (1 << 13) 67 #define DWMCI_INTMSK_ACD (1 << 14) 68 #define DWMCI_INTMSK_EBE (1 << 15) 69 70 /* Raw interrupt Regsiter */ 71 #define DWMCI_DATA_ERR (DWMCI_INTMSK_EBE | DWMCI_INTMSK_SBE | DWMCI_INTMSK_HLE |\ 72 DWMCI_INTMSK_FRUN | DWMCI_INTMSK_EBE | DWMCI_INTMSK_DCRC) 73 #define DWMCI_DATA_TOUT (DWMCI_INTMSK_HTO | DWMCI_INTMSK_DRTO) 74 /* CTRL register */ 75 #define DWMCI_CTRL_RESET (1 << 0) 76 #define DWMCI_CTRL_FIFO_RESET (1 << 1) 77 #define DWMCI_CTRL_DMA_RESET (1 << 2) 78 #define DWMCI_DMA_EN (1 << 5) 79 #define DWMCI_CTRL_SEND_AS_CCSD (1 << 10) 80 #define DWMCI_IDMAC_EN (1 << 25) 81 #define DWMCI_RESET_ALL (DWMCI_CTRL_RESET | DWMCI_CTRL_FIFO_RESET |\ 82 DWMCI_CTRL_DMA_RESET) 83 84 /* CMD register */ 85 #define DWMCI_CMD_RESP_EXP (1 << 6) 86 #define DWMCI_CMD_RESP_LENGTH (1 << 7) 87 #define DWMCI_CMD_CHECK_CRC (1 << 8) 88 #define DWMCI_CMD_DATA_EXP (1 << 9) 89 #define DWMCI_CMD_RW (1 << 10) 90 #define DWMCI_CMD_SEND_STOP (1 << 12) 91 #define DWMCI_CMD_ABORT_STOP (1 << 14) 92 #define DWMCI_CMD_PRV_DAT_WAIT (1 << 13) 93 #define DWMCI_CMD_UPD_CLK (1 << 21) 94 #define DWMCI_CMD_USE_HOLD_REG (1 << 29) 95 #define DWMCI_CMD_START (1 << 31) 96 97 /* CLKENA register */ 98 #define DWMCI_CLKEN_ENABLE (1 << 0) 99 #define DWMCI_CLKEN_LOW_PWR (1 << 16) 100 101 /* Card-type registe */ 102 #define DWMCI_CTYPE_1BIT 0 103 #define DWMCI_CTYPE_4BIT (1 << 0) 104 #define DWMCI_CTYPE_8BIT (1 << 16) 105 106 /* Status Register */ 107 #define DWMCI_FIFO_EMPTY (1 << 2) 108 #define DWMCI_FIFO_FULL (1 << 3) 109 #define DWMCI_BUSY (1 << 9) 110 #define DWMCI_FIFO_MASK 0x1fff 111 #define DWMCI_FIFO_SHIFT 17 112 113 /* FIFOTH Register */ 114 #define MSIZE(x) ((x) << 28) 115 #define RX_WMARK(x) ((x) << 16) 116 #define TX_WMARK(x) (x) 117 #define RX_WMARK_SHIFT 16 118 #define RX_WMARK_MASK (0xfff << RX_WMARK_SHIFT) 119 120 #define DWMCI_IDMAC_OWN (1 << 31) 121 #define DWMCI_IDMAC_CH (1 << 4) 122 #define DWMCI_IDMAC_FS (1 << 3) 123 #define DWMCI_IDMAC_LD (1 << 2) 124 125 /* Bus Mode Register */ 126 #define DWMCI_BMOD_IDMAC_RESET (1 << 0) 127 #define DWMCI_BMOD_IDMAC_FB (1 << 1) 128 #define DWMCI_BMOD_IDMAC_EN (1 << 7) 129 130 /* UHS register */ 131 #define DWMCI_DDR_MODE (1 << 16) 132 133 /* Internal IDMAC interrupt defines */ 134 #define DWMCI_IDINTEN_RI BIT(1) 135 #define DWMCI_IDINTEN_TI BIT(0) 136 137 #define DWMCI_IDINTEN_MASK (DWMCI_IDINTEN_TI | \ 138 DWMCI_IDINTEN_RI) 139 140 /* quirks */ 141 #define DWMCI_QUIRK_DISABLE_SMU (1 << 0) 142 143 /** 144 * struct dwmci_host - Information about a designware MMC host 145 * 146 * @name: Device name 147 * @ioaddr: Base I/O address of controller 148 * @quirks: Quick flags - see DWMCI_QUIRK_... 149 * @caps: Capabilities - see MMC_MODE_... 150 * @bus_hz: Bus speed in Hz, if @get_mmc_clk() is NULL 151 * @div: Arbitrary clock divider value for use by controller 152 * @dev_index: Arbitrary device index for use by controller 153 * @dev_id: Arbitrary device ID for use by controller 154 * @buswidth: Bus width in bits (8 or 4) 155 * @fifoth_val: Value for FIFOTH register (or 0 to leave unset) 156 * @mmc: Pointer to generic MMC structure for this device 157 * @priv: Private pointer for use by controller 158 */ 159 struct dwmci_host { 160 const char *name; 161 void *ioaddr; 162 unsigned int quirks; 163 unsigned int caps; 164 unsigned int version; 165 unsigned int clock; 166 unsigned int bus_hz; 167 unsigned int div; 168 int dev_index; 169 int dev_id; 170 int buswidth; 171 u32 fifoth_val; 172 struct mmc *mmc; 173 void *priv; 174 175 void (*clksel)(struct dwmci_host *host); 176 void (*board_init)(struct dwmci_host *host); 177 178 /** 179 * Get / set a particular MMC clock frequency 180 * 181 * This is used to request the current clock frequency of the clock 182 * that drives the DWMMC peripheral. The caller will then use this 183 * information to work out the divider it needs to achieve the 184 * required MMC bus clock frequency. If you want to handle the 185 * clock external to DWMMC, use @freq to select the frequency and 186 * return that value too. Then DWMMC will put itself in bypass mode. 187 * 188 * @host: DWMMC host 189 * @freq: Frequency the host is trying to achieve 190 */ 191 unsigned int (*get_mmc_clk)(struct dwmci_host *host, uint freq); 192 #ifndef CONFIG_BLK 193 struct mmc_config cfg; 194 #endif 195 196 /* use fifo mode to read and write data */ 197 bool fifo_mode; 198 }; 199 200 struct dwmci_idmac { 201 u32 flags; 202 u32 cnt; 203 u32 addr; 204 u32 next_addr; 205 } __aligned(ARCH_DMA_MINALIGN); 206 207 static inline void dwmci_writel(struct dwmci_host *host, int reg, u32 val) 208 { 209 writel(val, host->ioaddr + reg); 210 } 211 212 static inline void dwmci_writew(struct dwmci_host *host, int reg, u16 val) 213 { 214 writew(val, host->ioaddr + reg); 215 } 216 217 static inline void dwmci_writeb(struct dwmci_host *host, int reg, u8 val) 218 { 219 writeb(val, host->ioaddr + reg); 220 } 221 static inline u32 dwmci_readl(struct dwmci_host *host, int reg) 222 { 223 return readl(host->ioaddr + reg); 224 } 225 226 static inline u16 dwmci_readw(struct dwmci_host *host, int reg) 227 { 228 return readw(host->ioaddr + reg); 229 } 230 231 static inline u8 dwmci_readb(struct dwmci_host *host, int reg) 232 { 233 return readb(host->ioaddr + reg); 234 } 235 236 #ifdef CONFIG_BLK 237 /** 238 * dwmci_setup_cfg() - Set up the configuration for DWMMC 239 * 240 * This is used to set up a DWMMC device when you are using CONFIG_BLK. 241 * 242 * This should be called from your MMC driver's probe() method once you have 243 * the information required. 244 * 245 * Generally your driver will have a platform data structure which holds both 246 * the configuration (struct mmc_config) and the MMC device info (struct mmc). 247 * For example: 248 * 249 * struct rockchip_mmc_plat { 250 * struct mmc_config cfg; 251 * struct mmc mmc; 252 * }; 253 * 254 * ... 255 * 256 * Inside U_BOOT_DRIVER(): 257 * .platdata_auto_alloc_size = sizeof(struct rockchip_mmc_plat), 258 * 259 * To access platform data: 260 * struct rockchip_mmc_plat *plat = dev_get_platdata(dev); 261 * 262 * See rockchip_dw_mmc.c for an example. 263 * 264 * @cfg: Configuration structure to fill in (generally &plat->mmc) 265 * @host: DWMMC host 266 * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) 267 * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) 268 */ 269 void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host, 270 u32 max_clk, u32 min_clk); 271 272 /** 273 * dwmci_bind() - Set up a new MMC block device 274 * 275 * This is used to set up a DWMMC block device when you are using CONFIG_BLK. 276 * It should be called from your driver's bind() method. 277 * 278 * See rockchip_dw_mmc.c for an example. 279 * 280 * @dev: Device to set up 281 * @mmc: Pointer to mmc structure (normally &plat->mmc) 282 * @cfg: Empty configuration structure (generally &plat->cfg). This is 283 * normally all zeroes at this point. The only purpose of passing 284 * this in is to set mmc->cfg to it. 285 * @return 0 if OK, -ve if the block device could not be created 286 */ 287 int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg); 288 289 #else 290 /** 291 * add_dwmci() - Add a new DWMMC interface 292 * 293 * This is used when you are not using CONFIG_BLK. Convert your driver over! 294 * 295 * @host: DWMMC host structure 296 * @max_clk: Maximum supported clock speed in HZ (e.g. 150000000) 297 * @min_clk: Minimum supported clock speed in HZ (e.g. 400000) 298 * @return 0 if OK, -ve on error 299 */ 300 int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk); 301 #endif /* !CONFIG_BLK */ 302 303 #ifdef CONFIG_DM_MMC 304 /* Export the operations to drivers */ 305 int dwmci_probe(struct udevice *dev); 306 extern const struct dm_mmc_ops dm_dwmci_ops; 307 #endif 308 309 #endif /* __DWMMC_HW_H */ 310