xref: /openbmc/u-boot/include/dp83848.h (revision ee52b188)
1 /*
2  * DP83848 ethernet Physical layer
3  *
4  * Copyright (C) 2007 Sergey Kubushyn <ksi@koi8.net>
5  *
6  *
7  * This program is free software; you can redistribute it and/or
8  * modify it under the terms of the GNU General Public License
9  * as published by the Free Software Foundation; either version
10  * 2 of the License, or (at your option) any later version.
11  */
12 
13 
14 /* National Semiconductor PHYSICAL LAYER TRANSCEIVER DP83848 */
15 
16 #define DP83848_CTL_REG		0x0	/* Basic Mode Control Reg */
17 #define DP83848_STAT_REG		0x1	/* Basic Mode Status Reg */
18 #define DP83848_PHYID1_REG		0x2	/* PHY Idendifier Reg 1 */
19 #define DP83848_PHYID2_REG		0x3	/* PHY Idendifier Reg 2 */
20 #define DP83848_ANA_REG			0x4	/* Auto_Neg Advt Reg  */
21 #define DP83848_ANLPA_REG		0x5	/* Auto_neg Link Partner Ability Reg */
22 #define DP83848_ANE_REG			0x6	/* Auto-neg Expansion Reg  */
23 #define DP83848_PHY_STAT_REG		0x10	/* PHY Status Register  */
24 #define DP83848_PHY_INTR_CTRL_REG	0x11	/* PHY Interrupt Control Register */
25 #define DP83848_PHY_CTRL_REG		0x19	/* PHY Status Register  */
26 
27 /*--Bit definitions: DP83848_CTL_REG */
28 #define DP83848_RESET		(1 << 15)  /* 1= S/W Reset */
29 #define DP83848_LOOPBACK	(1 << 14)  /* 1=loopback Enabled */
30 #define DP83848_SPEED_SELECT	(1 << 13)
31 #define DP83848_AUTONEG		(1 << 12)
32 #define DP83848_POWER_DOWN	(1 << 11)
33 #define DP83848_ISOLATE		(1 << 10)
34 #define DP83848_RESTART_AUTONEG	(1 << 9)
35 #define DP83848_DUPLEX_MODE	(1 << 8)
36 #define DP83848_COLLISION_TEST	(1 << 7)
37 
38 /*--Bit definitions: DP83848_STAT_REG */
39 #define DP83848_100BASE_T4	(1 << 15)
40 #define DP83848_100BASE_TX_FD	(1 << 14)
41 #define DP83848_100BASE_TX_HD	(1 << 13)
42 #define DP83848_10BASE_T_FD	(1 << 12)
43 #define DP83848_10BASE_T_HD	(1 << 11)
44 #define DP83848_MF_PREAMB_SUPPR	(1 << 6)
45 #define DP83848_AUTONEG_COMP	(1 << 5)
46 #define DP83848_RMT_FAULT	(1 << 4)
47 #define DP83848_AUTONEG_ABILITY	(1 << 3)
48 #define DP83848_LINK_STATUS	(1 << 2)
49 #define DP83848_JABBER_DETECT	(1 << 1)
50 #define DP83848_EXTEND_CAPAB	(1 << 0)
51 
52 /*--definitions: DP83848_PHYID1 */
53 #define DP83848_PHYID1_OUI	0x2000
54 #define DP83848_PHYID2_OUI	0x5c90
55 
56 /*--Bit definitions: DP83848_ANAR, DP83848_ANLPAR */
57 #define DP83848_NP		(1 << 15)
58 #define DP83848_ACK		(1 << 14)
59 #define DP83848_RF		(1 << 13)
60 #define DP83848_PAUSE		(1 << 10)
61 #define DP83848_T4		(1 << 9)
62 #define DP83848_TX_FDX		(1 << 8)
63 #define DP83848_TX_HDX		(1 << 7)
64 #define DP83848_10_FDX		(1 << 6)
65 #define DP83848_10_HDX		(1 << 5)
66 #define DP83848_AN_IEEE_802_3	0x0001
67 
68 /*--Bit definitions: DP83848_ANER */
69 #define DP83848_PDF		(1 << 4)
70 #define DP83848_LP_NP_ABLE	(1 << 3)
71 #define DP83848_NP_ABLE		(1 << 2)
72 #define DP83848_PAGE_RX		(1 << 1)
73 #define DP83848_LP_AN_ABLE	(1 << 0)
74 
75 /*--Bit definitions: DP83848_PHY_STAT */
76 #define DP83848_RX_ERR_LATCH		(1 << 13)
77 #define DP83848_POLARITY_STAT		(1 << 12)
78 #define DP83848_FALSE_CAR_SENSE		(1 << 11)
79 #define DP83848_SIG_DETECT		(1 << 10)
80 #define DP83848_DESCRAM_LOCK		(1 << 9)
81 #define DP83848_PAGE_RCV		(1 << 8)
82 #define DP83848_PHY_RMT_FAULT		(1 << 6)
83 #define DP83848_JABBER			(1 << 5)
84 #define DP83848_AUTONEG_COMPLETE	(1 << 4)
85 #define DP83848_LOOPBACK_STAT		(1 << 3)
86 #define DP83848_DUPLEX			(1 << 2)
87 #define DP83848_SPEED			(1 << 1)
88 #define DP83848_LINK			(1 << 0)
89