1 /* 2 * (C) Copyright 2012 Michal Simek <monstr@monstr.eu> 3 * (C) Copyright 2013 Xilinx, Inc. 4 * 5 * Common configuration options for all Zynq boards. 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_ZYNQ_COMMON_H 11 #define __CONFIG_ZYNQ_COMMON_H 12 13 /* CPU clock */ 14 #ifndef CONFIG_CPU_FREQ_HZ 15 # define CONFIG_CPU_FREQ_HZ 800000000 16 #endif 17 18 /* Cache options */ 19 #define CONFIG_CMD_CACHE 20 #define CONFIG_SYS_CACHELINE_SIZE 32 21 22 #define CONFIG_SYS_L2CACHE_OFF 23 #ifndef CONFIG_SYS_L2CACHE_OFF 24 # define CONFIG_SYS_L2_PL310 25 # define CONFIG_SYS_PL310_BASE 0xf8f02000 26 #endif 27 28 #define ZYNQ_SCUTIMER_BASEADDR 0xF8F00600 29 #define CONFIG_SYS_TIMERBASE ZYNQ_SCUTIMER_BASEADDR 30 #define CONFIG_SYS_TIMER_COUNTS_DOWN 31 #define CONFIG_SYS_TIMER_COUNTER (CONFIG_SYS_TIMERBASE + 0x4) 32 33 /* Serial drivers */ 34 #define CONFIG_BAUDRATE 115200 35 /* The following table includes the supported baudrates */ 36 #define CONFIG_SYS_BAUDRATE_TABLE \ 37 {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200, 230400} 38 39 /* DCC driver */ 40 #if defined(CONFIG_ZYNQ_DCC) 41 # define CONFIG_ARM_DCC 42 #else 43 # define CONFIG_ZYNQ_SERIAL 44 #endif 45 46 #define CONFIG_ZYNQ_GPIO 47 #define CONFIG_CMD_GPIO 48 49 /* Ethernet driver */ 50 #if defined(CONFIG_ZYNQ_GEM0) || defined(CONFIG_ZYNQ_GEM1) 51 # define CONFIG_ZYNQ_GEM 52 # define CONFIG_MII 53 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 54 # define CONFIG_PHYLIB 55 # define CONFIG_PHY_MARVELL 56 # define CONFIG_BOOTP_SERVERIP 57 # define CONFIG_BOOTP_BOOTPATH 58 # define CONFIG_BOOTP_GATEWAY 59 # define CONFIG_BOOTP_HOSTNAME 60 # define CONFIG_BOOTP_MAY_FAIL 61 # if !defined(CONFIG_ZYNQ_GEM_EMIO0) 62 # define CONFIG_ZYNQ_GEM_EMIO0 0 63 # endif 64 # if !defined(CONFIG_ZYNQ_GEM_EMIO1) 65 # define CONFIG_ZYNQ_GEM_EMIO1 0 66 # endif 67 #endif 68 69 /* SPI */ 70 #ifdef CONFIG_ZYNQ_SPI 71 # define CONFIG_SPI_FLASH 72 # define CONFIG_SPI_FLASH_SST 73 # define CONFIG_CMD_SF 74 #endif 75 76 /* NOR */ 77 #ifndef CONFIG_SYS_NO_FLASH 78 # define CONFIG_SYS_FLASH_BASE 0xE2000000 79 # define CONFIG_SYS_FLASH_SIZE (16 * 1024 * 1024) 80 # define CONFIG_SYS_MAX_FLASH_BANKS 1 81 # define CONFIG_SYS_MAX_FLASH_SECT 512 82 # define CONFIG_SYS_FLASH_ERASE_TOUT 1000 83 # define CONFIG_SYS_FLASH_WRITE_TOUT 5000 84 # define CONFIG_FLASH_SHOW_PROGRESS 10 85 # define CONFIG_SYS_FLASH_CFI 86 # undef CONFIG_SYS_FLASH_EMPTY_INFO 87 # define CONFIG_FLASH_CFI_DRIVER 88 # undef CONFIG_SYS_FLASH_PROTECTION 89 # define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 90 #endif 91 92 /* MMC */ 93 #if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) 94 # define CONFIG_MMC 95 # define CONFIG_GENERIC_MMC 96 # define CONFIG_SDHCI 97 # define CONFIG_ZYNQ_SDHCI 98 # define CONFIG_CMD_MMC 99 #endif 100 101 #ifdef CONFIG_ZYNQ_USB 102 # define CONFIG_USB_EHCI 103 # define CONFIG_CMD_USB 104 # define CONFIG_USB_STORAGE 105 # define CONFIG_USB_EHCI_ZYNQ 106 # define CONFIG_USB_ULPI_VIEWPORT 107 # define CONFIG_USB_ULPI 108 # define CONFIG_EHCI_IS_TDI 109 # define CONFIG_USB_MAX_CONTROLLER_COUNT 2 110 111 # define CONFIG_CI_UDC /* ChipIdea CI13xxx UDC */ 112 # define CONFIG_USB_GADGET 113 # define CONFIG_USB_GADGET_DUALSPEED 114 # define CONFIG_USBDOWNLOAD_GADGET 115 # define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x600000 116 # define DFU_DEFAULT_POLL_TIMEOUT 300 117 # define CONFIG_DFU_FUNCTION 118 # define CONFIG_DFU_RAM 119 # define CONFIG_USB_GADGET_VBUS_DRAW 2 120 # define CONFIG_G_DNL_VENDOR_NUM 0x03FD 121 # define CONFIG_G_DNL_PRODUCT_NUM 0x0300 122 # define CONFIG_G_DNL_MANUFACTURER "Xilinx" 123 # define CONFIG_USB_GADGET 124 # define CONFIG_USB_CABLE_CHECK 125 # define CONFIG_CMD_DFU 126 # define CONFIG_CMD_THOR_DOWNLOAD 127 # define CONFIG_THOR_FUNCTION 128 # define DFU_ALT_INFO_RAM \ 129 "dfu_ram_info=" \ 130 "set dfu_alt_info " \ 131 "${kernel_image} ram 0x3000000 0x500000\\\\;" \ 132 "${devicetree_image} ram 0x2A00000 0x20000\\\\;" \ 133 "${ramdisk_image} ram 0x2000000 0x600000\0" \ 134 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ 135 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" 136 137 # if defined(CONFIG_ZYNQ_SDHCI0) || defined(CONFIG_ZYNQ_SDHCI1) 138 # define CONFIG_DFU_MMC 139 # define DFU_ALT_INFO_MMC \ 140 "dfu_mmc_info=" \ 141 "set dfu_alt_info " \ 142 "${kernel_image} fat 0 1\\\\;" \ 143 "${devicetree_image} fat 0 1\\\\;" \ 144 "${ramdisk_image} fat 0 1\0" \ 145 "dfu_mmc=run dfu_mmc_info && dfu 0 mmc 0\0" \ 146 "thor_mmc=run dfu_mmc_info && thordown 0 mmc 0\0" 147 148 # define DFU_ALT_INFO \ 149 DFU_ALT_INFO_RAM \ 150 DFU_ALT_INFO_MMC 151 # else 152 # define DFU_ALT_INFO \ 153 DFU_ALT_INFO_RAM 154 # endif 155 #endif 156 157 #if !defined(DFU_ALT_INFO) 158 # define DFU_ALT_INFO 159 #endif 160 161 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQ_USB) 162 # define CONFIG_SUPPORT_VFAT 163 # define CONFIG_CMD_FAT 164 # define CONFIG_CMD_EXT2 165 # define CONFIG_FAT_WRITE 166 # define CONFIG_DOS_PARTITION 167 # define CONFIG_CMD_EXT4 168 # define CONFIG_CMD_EXT4_WRITE 169 # define CONFIG_CMD_FS_GENERIC 170 #endif 171 172 #define CONFIG_SYS_I2C_ZYNQ 173 /* I2C */ 174 #if defined(CONFIG_SYS_I2C_ZYNQ) 175 # define CONFIG_CMD_I2C 176 # define CONFIG_SYS_I2C 177 # define CONFIG_SYS_I2C_ZYNQ_SPEED 100000 178 # define CONFIG_SYS_I2C_ZYNQ_SLAVE 0 179 #endif 180 181 /* EEPROM */ 182 #ifdef CONFIG_ZYNQ_EEPROM 183 # define CONFIG_CMD_EEPROM 184 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1 185 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 186 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 187 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 188 # define CONFIG_SYS_EEPROM_SIZE 1024 /* Bytes */ 189 #endif 190 191 /* Total Size of Environment Sector */ 192 #define CONFIG_ENV_SIZE (128 << 10) 193 194 /* Allow to overwrite serial and ethaddr */ 195 #define CONFIG_ENV_OVERWRITE 196 197 /* Environment */ 198 #ifndef CONFIG_ENV_IS_NOWHERE 199 # ifndef CONFIG_SYS_NO_FLASH 200 # define CONFIG_ENV_IS_IN_FLASH 201 # elif defined(CONFIG_SYS_NO_FLASH) 202 # define CONFIG_ENV_IS_NOWHERE 203 # endif 204 205 # define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE 206 # define CONFIG_ENV_OFFSET 0xE0000 207 # define CONFIG_CMD_SAVEENV 208 #endif 209 210 /* Default environment */ 211 #define CONFIG_EXTRA_ENV_SETTINGS \ 212 "fit_image=fit.itb\0" \ 213 "load_addr=0x2000000\0" \ 214 "fit_size=0x800000\0" \ 215 "flash_off=0x100000\0" \ 216 "nor_flash_off=0xE2100000\0" \ 217 "fdt_high=0x20000000\0" \ 218 "initrd_high=0x20000000\0" \ 219 "norboot=echo Copying FIT from NOR flash to RAM... && " \ 220 "cp.b ${nor_flash_off} ${load_addr} ${fit_size} && " \ 221 "bootm ${load_addr}\0" \ 222 "sdboot=echo Copying FIT from SD to RAM... && " \ 223 "load mmc 0 ${load_addr} ${fit_image} && " \ 224 "bootm ${load_addr}\0" \ 225 "jtagboot=echo TFTPing FIT to RAM... && " \ 226 "tftpboot ${load_addr} ${fit_image} && " \ 227 "bootm ${load_addr}\0" \ 228 "usbboot=if usb start; then " \ 229 "echo Copying FIT from USB to RAM... && " \ 230 "load usb 0 ${load_addr} ${fit_image} && " \ 231 "bootm ${load_addr}\0" \ 232 "fi\0" \ 233 DFU_ALT_INFO 234 235 #define CONFIG_BOOTCOMMAND "run $modeboot" 236 #define CONFIG_BOOTDELAY 3 /* -1 to Disable autoboot */ 237 #define CONFIG_SYS_LOAD_ADDR 0 /* default? */ 238 239 /* Miscellaneous configurable options */ 240 #define CONFIG_SYS_PROMPT "zynq-uboot> " 241 #define CONFIG_SYS_HUSH_PARSER 242 243 #define CONFIG_CMDLINE_EDITING 244 #define CONFIG_AUTO_COMPLETE 245 #define CONFIG_BOARD_LATE_INIT 246 #define CONFIG_DISPLAY_BOARDINFO 247 #define CONFIG_SYS_LONGHELP 248 #define CONFIG_CLOCKS 249 #define CONFIG_CMD_CLK 250 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 251 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 252 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 253 sizeof(CONFIG_SYS_PROMPT) + 16) 254 255 /* Physical Memory map */ 256 #define CONFIG_SYS_TEXT_BASE 0x4000000 257 258 #define CONFIG_NR_DRAM_BANKS 1 259 #define CONFIG_SYS_SDRAM_BASE 0 260 261 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 262 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x1000) 263 264 #define CONFIG_SYS_MALLOC_LEN 0x1400000 265 #define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_SDRAM_BASE 266 #define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_MALLOC_LEN 267 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \ 268 CONFIG_SYS_INIT_RAM_SIZE - \ 269 GENERATED_GBL_DATA_SIZE) 270 271 /* Enable the PL to be downloaded */ 272 #define CONFIG_FPGA 273 #define CONFIG_FPGA_XILINX 274 #define CONFIG_FPGA_ZYNQPL 275 #define CONFIG_CMD_FPGA 276 #define CONFIG_CMD_FPGA_LOADMK 277 #define CONFIG_CMD_FPGA_LOADP 278 #define CONFIG_CMD_FPGA_LOADBP 279 #define CONFIG_CMD_FPGA_LOADFS 280 281 /* Open Firmware flat tree */ 282 #define CONFIG_OF_LIBFDT 283 284 /* FIT support */ 285 #define CONFIG_IMAGE_FORMAT_LEGACY /* enable also legacy image format */ 286 287 /* FDT support */ 288 #define CONFIG_DISPLAY_BOARDINFO_LATE 289 290 /* Extend size of kernel image for uncompression */ 291 #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) 292 293 /* Boot FreeBSD/vxWorks from an ELF image */ 294 #if defined(CONFIG_ZYNQ_BOOT_FREEBSD) 295 # define CONFIG_API 296 # define CONFIG_CMD_ELF 297 # define CONFIG_SYS_MMC_MAX_DEVICE 1 298 #endif 299 300 #define CONFIG_SYS_LDSCRIPT "arch/arm/mach-zynq/u-boot.lds" 301 302 /* Commands */ 303 #include <config_cmd_default.h> 304 305 #define CONFIG_CMD_PING 306 #define CONFIG_CMD_DHCP 307 #define CONFIG_CMD_MII 308 #define CONFIG_CMD_TFTPPUT 309 310 /* SPL part */ 311 #define CONFIG_CMD_SPL 312 #define CONFIG_SPL_FRAMEWORK 313 #define CONFIG_SPL_LIBCOMMON_SUPPORT 314 #define CONFIG_SPL_LIBGENERIC_SUPPORT 315 #define CONFIG_SPL_SERIAL_SUPPORT 316 #define CONFIG_SPL_BOARD_INIT 317 318 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-zynq/u-boot-spl.lds" 319 320 /* MMC support */ 321 #ifdef CONFIG_ZYNQ_SDHCI0 322 #define CONFIG_SPL_MMC_SUPPORT 323 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x300 /* address 0x60000 */ 324 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS 0x200 /* 256 KB */ 325 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 326 #define CONFIG_SPL_LIBDISK_SUPPORT 327 #define CONFIG_SPL_FAT_SUPPORT 328 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot-dtb.img" 329 #endif 330 331 /* Disable dcache for SPL just for sure */ 332 #ifdef CONFIG_SPL_BUILD 333 #define CONFIG_SYS_DCACHE_OFF 334 #undef CONFIG_FPGA 335 #endif 336 337 /* Address in RAM where the parameters must be copied by SPL. */ 338 #define CONFIG_SYS_SPL_ARGS_ADDR 0x10000000 339 340 #define CONFIG_SPL_FS_LOAD_ARGS_NAME "system.dtb" 341 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "uImage" 342 343 /* Not using MMC raw mode - just for compilation purpose */ 344 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 345 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 346 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 347 348 /* qspi mode is working fine */ 349 #ifdef CONFIG_ZYNQ_QSPI 350 #define CONFIG_SPL_SPI_SUPPORT 351 #define CONFIG_SPL_SPI_LOAD 352 #define CONFIG_SPL_SPI_FLASH_SUPPORT 353 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x100000 354 #endif 355 356 /* for booting directly linux */ 357 #define CONFIG_SPL_OS_BOOT 358 359 /* SP location before relocation, must use scratch RAM */ 360 #define CONFIG_SPL_TEXT_BASE 0x0 361 362 /* 3 * 64kB blocks of OCM - one is on the top because of bootrom */ 363 #define CONFIG_SPL_MAX_SIZE 0x30000 364 365 /* The highest 64k OCM address */ 366 #define OCM_HIGH_ADDR 0xffff0000 367 368 /* Just define any reasonable size */ 369 #define CONFIG_SPL_STACK_SIZE 0x1000 370 371 /* SPL stack position - and stack goes down */ 372 #define CONFIG_SPL_STACK (OCM_HIGH_ADDR + CONFIG_SPL_STACK_SIZE) 373 374 /* On the top of OCM space */ 375 #define CONFIG_SYS_SPL_MALLOC_START (CONFIG_SPL_STACK + \ 376 GENERATED_GBL_DATA_SIZE) 377 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x1000 378 379 /* BSS setup */ 380 #define CONFIG_SPL_BSS_START_ADDR 0x100000 381 #define CONFIG_SPL_BSS_MAX_SIZE 0x100000 382 383 #define CONFIG_SYS_UBOOT_START CONFIG_SYS_TEXT_BASE 384 385 #define CONFIG_SYS_GENERIC_BOARD 386 387 #endif /* __CONFIG_ZYNQ_COMMON_H */ 388