xref: /openbmc/u-boot/include/configs/zmx25.h (revision f9727161)
1 /*
2  * (c) 2011 Graf-Syteco, Matthias Weisser
3  * <weisserm@arcor.de>
4  *
5  * Configuation settings for the zmx25 board
6  *
7  * SPDX-License-Identifier:	GPL-2.0+
8  */
9 
10 #ifndef __CONFIG_H
11 #define __CONFIG_H
12 
13 #define CONFIG_ARM926EJS			/* arm926ejs CPU core */
14 #define CONFIG_MX25
15 #define CONFIG_SYS_HZ			1000
16 #define CONFIG_SYS_TEXT_BASE		0xA0000000
17 
18 #define CONFIG_MACH_TYPE	MACH_TYPE_ZMX25
19 /*
20  * Environment settings
21  */
22 #define CONFIG_EXTRA_ENV_SETTINGS \
23 	"gs_fast_boot=setenv bootdelay 5\0" \
24 	"gs_slow_boot=setenv bootdelay 10\0" \
25 	"bootcmd=dcache off; mw.l 0x81000000 0 1024; usb start;" \
26 		"fatls usb 0; fatload usb 0 0x81000000 zmx25-init.bin;" \
27 		"bootm 0x81000000; bootelf 0x81000000\0"
28 
29 #define CONFIG_CMDLINE_TAG		/* enable passing of ATAGs	*/
30 #define CONFIG_SETUP_MEMORY_TAGS
31 #define CONFIG_INITRD_TAG
32 #define CONFIG_BOARD_LATE_INIT
33 
34 /*
35  * Compressions
36  */
37 #define CONFIG_LZO
38 
39 /*
40  * Hardware drivers
41  */
42 
43 /*
44  * GPIO
45  */
46 #define CONFIG_MXC_GPIO
47 
48 /*
49  * Serial
50  */
51 #define CONFIG_MXC_UART
52 #define CONFIG_MXC_UART_BASE	UART2_BASE
53 #define CONFIG_CONS_INDEX	1	/* use UART2 for console */
54 #define CONFIG_BAUDRATE		115200	/* Default baud rate */
55 
56 /*
57  * Ethernet
58  */
59 #define CONFIG_FEC_MXC
60 #define CONFIG_FEC_MXC_PHYADDR		0x00
61 #define CONFIG_MII
62 
63 /*
64  * BOOTP options
65  */
66 #define CONFIG_BOOTP_BOOTFILESIZE
67 #define CONFIG_BOOTP_BOOTPATH
68 #define CONFIG_BOOTP_GATEWAY
69 #define CONFIG_BOOTP_HOSTNAME
70 
71 /*
72  * Command line configuration.
73  */
74 #include <config_cmd_default.h>
75 #define CONFIG_CMD_NET
76 #define CONFIG_CMD_CACHE
77 
78 /*
79  * Additional command
80  */
81 #define CONFIG_CMD_DHCP
82 #define CONFIG_CMD_PING
83 #define CONFIG_CMD_ELF
84 #define CONFIG_CMD_FAT
85 #define CONFIG_CMD_USB
86 
87 #define CONFIG_SYS_HUSH_PARSER
88 
89 /*
90  * USB
91  */
92 #ifdef CONFIG_CMD_USB
93 #define CONFIG_USB_EHCI			/* Enable EHCI USB support */
94 #define CONFIG_USB_EHCI_MXC
95 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
96 #define CONFIG_MXC_USB_PORT	1
97 #define CONFIG_MXC_USB_PORTSC	MXC_EHCI_MODE_SERIAL
98 #define CONFIG_MXC_USB_FLAGS	(MXC_EHCI_INTERNAL_PHY | MXC_EHCI_IPPUE_DOWN)
99 #define CONFIG_EHCI_IS_TDI
100 #define CONFIG_USB_STORAGE
101 #define CONFIG_DOS_PARTITION
102 #define CONFIG_SUPPORT_VFAT
103 #endif /* CONFIG_CMD_USB */
104 
105 /* SDRAM */
106 #define CONFIG_NR_DRAM_BANKS	1
107 #define PHYS_SDRAM		0x80000000	/* start address of LPDDRRAM */
108 #define PHYS_SDRAM_SIZE		0x04000000	/* 64 megs */
109 
110 #define CONFIG_SYS_SDRAM_BASE	PHYS_SDRAM
111 #define CONFIG_SYS_INIT_SP_ADDR	0x78020000	/* end of internal SRAM */
112 
113 /*
114  * FLASH and environment organization
115  */
116 #define CONFIG_SYS_FLASH_BASE		0xA0000000
117 #define CONFIG_SYS_MAX_FLASH_BANKS	1
118 #define CONFIG_SYS_MAX_FLASH_SECT	256
119 
120 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE + 0x00040000)
121 #define CONFIG_ENV_IS_IN_FLASH		1
122 #define CONFIG_ENV_SECT_SIZE		(128 * 1024)
123 #define CONFIG_ENV_SIZE			(128 * 1024)
124 
125 /*
126  * CFI FLASH driver setup
127  */
128 #define CONFIG_SYS_FLASH_CFI
129 #define CONFIG_FLASH_CFI_DRIVER
130 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	/* ~10x faster */
131 
132 #define CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_SDRAM_BASE
133 
134 #define CONFIG_SYS_MEMTEST_START	(PHYS_SDRAM + (512*1024))
135 #define CONFIG_SYS_MEMTEST_END		(PHYS_SDRAM + PHYS_SDRAM_SIZE)
136 
137 #define CONFIG_SYS_PROMPT	"zmx25> "
138 #define CONFIG_SYS_CBSIZE	256
139 #define CONFIG_SYS_MAXARGS	16
140 #define CONFIG_SYS_PBSIZE	(CONFIG_SYS_CBSIZE + \
141 				sizeof(CONFIG_SYS_PROMPT) + 16)
142 #define CONFIG_SYS_LONGHELP
143 #define CONFIG_CMDLINE_EDITING
144 
145 #define CONFIG_PREBOOT  ""
146 
147 #define CONFIG_BOOTDELAY	5
148 #define CONFIG_AUTOBOOT_KEYED
149 #define CONFIG_AUTOBOOT_PROMPT "boot in %d s\n", bootdelay
150 #define CONFIG_AUTOBOOT_DELAY_STR	"delaygs"
151 #define CONFIG_AUTOBOOT_STOP_STR	"stopgs"
152 
153 /*
154  * Size of malloc() pool
155  */
156 #define CONFIG_SYS_MALLOC_LEN		(0x400000 - 0x8000)
157 
158 #endif	/* __CONFIG_H */
159