1 /* 2 * Aeronix Zipit Z2 configuration file 3 * 4 * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of 9 * the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #ifndef __CONFIG_H 23 #define __CONFIG_H 24 25 /* 26 * High Level Board Configuration Options 27 */ 28 #define CONFIG_CPU_PXA27X 1 /* Marvell PXA270 CPU */ 29 #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ 30 #define CONFIG_SYS_TEXT_BASE 0x0 31 32 #undef CONFIG_BOARD_LATE_INIT 33 #undef CONFIG_USE_IRQ 34 #undef CONFIG_SKIP_LOWLEVEL_INIT 35 36 /* 37 * Environment settings 38 */ 39 #define CONFIG_ENV_OVERWRITE 40 #define CONFIG_ENV_IS_IN_FLASH 1 41 #define CONFIG_ENV_ADDR 0x40000 42 #define CONFIG_ENV_SIZE 0x20000 43 44 #define CONFIG_SYS_MALLOC_LEN (128*1024) 45 #define CONFIG_ARCH_CPU_INIT 46 47 #define CONFIG_BOOTCOMMAND \ 48 "if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\ 49 "then " \ 50 "source 0xa0000000; " \ 51 "else " \ 52 "bootm 0x60000; " \ 53 "fi; " 54 #define CONFIG_BOOTARGS \ 55 "console=tty0 console=ttyS2,115200 fbcon=rotate:3" 56 #define CONFIG_TIMESTAMP 57 #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ 58 #define CONFIG_CMDLINE_TAG 59 #define CONFIG_SETUP_MEMORY_TAGS 60 #define CONFIG_SYS_TEXT_BASE 0x0 61 #define CONFIG_LZMA /* LZMA compression support */ 62 63 /* 64 * Serial Console Configuration 65 * STUART - the lower serial port on Colibri board 66 */ 67 #define CONFIG_PXA_SERIAL 68 #define CONFIG_STUART 1 69 #define CONFIG_BAUDRATE 115200 70 71 /* 72 * Bootloader Components Configuration 73 */ 74 #include <config_cmd_default.h> 75 76 #undef CONFIG_CMD_NET 77 #undef CONFIG_CMD_NFS 78 #define CONFIG_CMD_ENV 79 #undef CONFIG_CMD_IMLS 80 #define CONFIG_CMD_MMC 81 #define CONFIG_CMD_SPI 82 83 /* 84 * MMC Card Configuration 85 */ 86 #ifdef CONFIG_CMD_MMC 87 #define CONFIG_MMC 88 #define CONFIG_GENERIC_MMC 89 #define CONFIG_PXA_MMC_GENERIC 90 #define CONFIG_SYS_MMC_BASE 0xF0000000 91 #define CONFIG_CMD_FAT 92 #define CONFIG_CMD_EXT2 93 #define CONFIG_DOS_PARTITION 94 #endif 95 96 /* 97 * SPI and LCD 98 */ 99 #ifdef CONFIG_CMD_SPI 100 #define CONFIG_SOFT_SPI 101 #define CONFIG_LCD 102 #define CONFIG_LMS283GF05 103 #define CONFIG_VIDEO_LOGO 104 #define CONFIG_CMD_BMP 105 #define CONFIG_SPLASH_SCREEN 106 #define CONFIG_SPLASH_SCREEN_ALIGN 107 #define CONFIG_VIDEO_BMP_GZIP 108 #define CONFIG_VIDEO_BMP_RLE8 109 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) 110 #undef SPI_INIT 111 112 #define SPI_DELAY udelay(10) 113 #define SPI_SDA(val) zipitz2_spi_sda(val) 114 #define SPI_SCL(val) zipitz2_spi_scl(val) 115 #define SPI_READ zipitz2_spi_read() 116 #ifndef __ASSEMBLY__ 117 void zipitz2_spi_sda(int); 118 void zipitz2_spi_scl(int); 119 unsigned char zipitz2_spi_read(void); 120 #endif 121 #endif 122 123 /* 124 * KGDB 125 */ 126 #ifdef CONFIG_CMD_KGDB 127 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 128 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 129 #endif 130 131 /* 132 * HUSH Shell Configuration 133 */ 134 #define CONFIG_SYS_HUSH_PARSER 1 135 136 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 137 #ifdef CONFIG_SYS_HUSH_PARSER 138 #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ 139 #else 140 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 141 #endif 142 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 143 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 144 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 145 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 146 #define CONFIG_SYS_DEVICE_NULLDEV 1 147 148 /* 149 * Clock Configuration 150 */ 151 #undef CONFIG_SYS_CLKS_IN_HZ 152 #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ 153 #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ 154 155 /* 156 * Stack sizes 157 */ 158 #define CONFIG_STACKSIZE (128*1024) /* regular stack */ 159 #ifdef CONFIG_USE_IRQ 160 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ 161 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ 162 #endif 163 164 /* 165 * SRAM Map 166 */ 167 #define PHYS_SRAM 0x5c000000 /* SRAM Bank #1 */ 168 #define PHYS_SRAM_SIZE 0x00040000 /* 256k */ 169 170 /* 171 * DRAM Map 172 */ 173 #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ 174 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ 175 #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ 176 177 #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ 178 #define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ 179 180 #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ 181 #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ 182 183 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE 184 185 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 186 #define CONFIG_SYS_INIT_SP_ADDR (GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048) 187 188 /* 189 * NOR FLASH 190 */ 191 #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ 192 #define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ 193 #define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ 194 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 195 196 #define CONFIG_SYS_FLASH_CFI 197 #define CONFIG_FLASH_CFI_DRIVER 1 198 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 199 200 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 201 #define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE 202 203 #define CONFIG_SYS_MAX_FLASH_BANKS 1 204 #define CONFIG_SYS_MAX_FLASH_SECT 256 205 206 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 207 208 #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) 209 #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) 210 #define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ) 211 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ) 212 #define CONFIG_SYS_FLASH_PROTECTION 213 214 /* 215 * GPIO settings 216 */ 217 #define CONFIG_SYS_GAFR0_L_VAL 0x02000140 218 #define CONFIG_SYS_GAFR0_U_VAL 0x59188000 219 #define CONFIG_SYS_GAFR1_L_VAL 0x63900002 220 #define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 221 #define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa 222 #define CONFIG_SYS_GAFR2_U_VAL 0x29000308 223 #define CONFIG_SYS_GAFR3_L_VAL 0x54000000 224 #define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 225 #define CONFIG_SYS_GPCR0_VAL 0x00000000 226 #define CONFIG_SYS_GPCR1_VAL 0x00000020 227 #define CONFIG_SYS_GPCR2_VAL 0x00000000 228 #define CONFIG_SYS_GPCR3_VAL 0x00000000 229 #define CONFIG_SYS_GPDR0_VAL 0xdafcee00 230 #define CONFIG_SYS_GPDR1_VAL 0xffa3aaab 231 #define CONFIG_SYS_GPDR2_VAL 0x8fe9ffff 232 #define CONFIG_SYS_GPDR3_VAL 0x001b1f8a 233 #define CONFIG_SYS_GPSR0_VAL 0x06080400 234 #define CONFIG_SYS_GPSR1_VAL 0x007f0000 235 #define CONFIG_SYS_GPSR2_VAL 0x032a0000 236 #define CONFIG_SYS_GPSR3_VAL 0x00000180 237 238 #define CONFIG_SYS_PSSR_VAL 0x30 239 240 /* 241 * Clock settings 242 */ 243 #define CONFIG_SYS_CKEN 0x00511220 244 #define CONFIG_SYS_CCCR 0x00000190 245 246 /* 247 * Memory settings 248 */ 249 #define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 250 #define CONFIG_SYS_MSC1_VAL 0x0000ccd1 251 #define CONFIG_SYS_MSC2_VAL 0x0000b884 252 #define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 253 #define CONFIG_SYS_MDREFR_VAL 0x2011a01e 254 #define CONFIG_SYS_MDMRS_VAL 0x00000000 255 #define CONFIG_SYS_FLYCNFG_VAL 0x00010001 256 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 257 258 /* 259 * PCMCIA and CF Interfaces 260 */ 261 #define CONFIG_SYS_MECR_VAL 0x00000001 262 #define CONFIG_SYS_MCMEM0_VAL 0x00014307 263 #define CONFIG_SYS_MCMEM1_VAL 0x00014307 264 #define CONFIG_SYS_MCATT0_VAL 0x0001c787 265 #define CONFIG_SYS_MCATT1_VAL 0x0001c787 266 #define CONFIG_SYS_MCIO0_VAL 0x0001430f 267 #define CONFIG_SYS_MCIO1_VAL 0x0001430f 268 269 #endif /* __CONFIG_H */ 270