xref: /openbmc/u-boot/include/configs/zipitz2.h (revision 4aac44be)
1 /*
2  * Aeronix Zipit Z2 configuration file
3  *
4  * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com>
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 /*
13  * High Level Board Configuration Options
14  */
15 #define	CONFIG_CPU_PXA27X		1	/* Marvell PXA270 CPU */
16 #define	CONFIG_SYS_TEXT_BASE		0x0
17 
18 #undef	CONFIG_SKIP_LOWLEVEL_INIT
19 #define	CONFIG_PREBOOT
20 
21 /*
22  * Environment settings
23  */
24 #define	CONFIG_ENV_OVERWRITE
25 #define CONFIG_ENV_IS_IN_FLASH		1
26 #define CONFIG_ENV_ADDR			0x40000
27 #define CONFIG_ENV_SIZE			0x10000
28 
29 #define	CONFIG_SYS_MALLOC_LEN		(128*1024)
30 #define	CONFIG_ARCH_CPU_INIT
31 
32 #define	CONFIG_BOOTCOMMAND						\
33 	"if mmc rescan && ext2load mmc 0 0xa0000000 boot/uboot.script ;"\
34 	"then "								\
35 		"source 0xa0000000; "					\
36 	"else "								\
37 		"bootm 0x50000; "					\
38 	"fi; "
39 #define	CONFIG_BOOTARGS							\
40 	"console=tty0 console=ttyS2,115200 fbcon=rotate:3"
41 #define	CONFIG_TIMESTAMP
42 #define	CONFIG_CMDLINE_TAG
43 #define	CONFIG_SETUP_MEMORY_TAGS
44 #define	CONFIG_SYS_TEXT_BASE		0x0
45 #define	CONFIG_LZMA			/* LZMA compression support */
46 
47 /*
48  * Serial Console Configuration
49  * STUART - the lower serial port on Colibri board
50  */
51 #define	CONFIG_STUART			1
52 #define CONFIG_CONS_INDEX		2
53 #define	CONFIG_BAUDRATE			115200
54 
55 /*
56  * Bootloader Components Configuration
57  */
58 #define	CONFIG_CMD_ENV
59 
60 /*
61  * MMC Card Configuration
62  */
63 #ifdef	CONFIG_CMD_MMC
64 #define	CONFIG_PXA_MMC_GENERIC
65 #define	CONFIG_SYS_MMC_BASE		0xF0000000
66 #endif
67 
68 /*
69  * SPI and LCD
70  */
71 #ifdef	CONFIG_CMD_SPI
72 #define	CONFIG_SOFT_SPI
73 #define	CONFIG_LCD_ROTATION
74 #define	CONFIG_PXA_LCD
75 #define	CONFIG_LMS283GF05
76 
77 #define	SPI_DELAY	udelay(10)
78 #define	SPI_SDA(val)	zipitz2_spi_sda(val)
79 #define	SPI_SCL(val)	zipitz2_spi_scl(val)
80 #define	SPI_READ	zipitz2_spi_read()
81 #ifndef	__ASSEMBLY__
82 void zipitz2_spi_sda(int);
83 void zipitz2_spi_scl(int);
84 unsigned char zipitz2_spi_read(void);
85 #endif
86 #endif
87 
88 #define	CONFIG_SYS_LONGHELP				/* undef to save memory	*/
89 #define	CONFIG_SYS_CBSIZE		256		/* Console I/O Buffer Size */
90 #define	CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)	/* Print Buffer Size */
91 #define	CONFIG_SYS_MAXARGS		16		/* max number of command args */
92 #define	CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE	/* Boot Argument Buffer Size */
93 #define	CONFIG_SYS_DEVICE_NULLDEV	1
94 
95 /*
96  * Clock Configuration
97  */
98 #define CONFIG_SYS_CPUSPEED		0x190		/* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */
99 
100 /*
101  * SRAM Map
102  */
103 #define	PHYS_SRAM			0x5c000000	/* SRAM Bank #1 */
104 #define	PHYS_SRAM_SIZE			0x00040000	/* 256k */
105 
106 /*
107  * DRAM Map
108  */
109 #define	CONFIG_NR_DRAM_BANKS		1		/* We have 1 bank of DRAM */
110 #define	PHYS_SDRAM_1			0xa0000000	/* SDRAM Bank #1 */
111 #define	PHYS_SDRAM_1_SIZE		0x02000000	/* 32 MB */
112 
113 #define	CONFIG_SYS_DRAM_BASE		0xa0000000	/* CS0 */
114 #define	CONFIG_SYS_DRAM_SIZE		0x02000000	/* 32 MB DRAM */
115 
116 #define CONFIG_SYS_MEMTEST_START	0xa0400000	/* memtest works on */
117 #define CONFIG_SYS_MEMTEST_END		0xa0800000	/* 4 ... 8 MB in DRAM */
118 
119 #define	CONFIG_SYS_LOAD_ADDR		CONFIG_SYS_DRAM_BASE
120 
121 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
122 #define	CONFIG_SYS_INIT_SP_ADDR		(GENERATED_GBL_DATA_SIZE + PHYS_SRAM + 2048)
123 
124 /*
125  * NOR FLASH
126  */
127 #define PHYS_FLASH_1			0x00000000	/* Flash Bank #1 */
128 #define PHYS_FLASH_SIZE			0x00800000	/* 8 MB */
129 #define PHYS_FLASH_SECT_SIZE		0x00010000	/* 64 KB sectors */
130 #define CONFIG_SYS_FLASH_BASE		PHYS_FLASH_1
131 
132 #define CONFIG_SYS_FLASH_CFI
133 #define CONFIG_FLASH_CFI_DRIVER		1
134 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_16BIT
135 
136 #define CONFIG_SYS_MONITOR_BASE		PHYS_FLASH_1
137 #define CONFIG_SYS_MONITOR_LEN		PHYS_FLASH_SECT_SIZE
138 
139 #define CONFIG_SYS_MAX_FLASH_BANKS	1
140 #define CONFIG_SYS_MAX_FLASH_SECT	256
141 
142 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE	1
143 
144 #define CONFIG_SYS_FLASH_ERASE_TOUT	240000
145 #define CONFIG_SYS_FLASH_WRITE_TOUT	240000
146 #define CONFIG_SYS_FLASH_LOCK_TOUT	240000
147 #define CONFIG_SYS_FLASH_UNLOCK_TOUT	240000
148 #define CONFIG_SYS_FLASH_PROTECTION
149 
150 /*
151  * GPIO settings
152  */
153 #define CONFIG_SYS_GAFR0_L_VAL	0x02000140
154 #define CONFIG_SYS_GAFR0_U_VAL	0x59188000
155 #define CONFIG_SYS_GAFR1_L_VAL	0x63900002
156 #define CONFIG_SYS_GAFR1_U_VAL	0xaaa03950
157 #define CONFIG_SYS_GAFR2_L_VAL	0x0aaaaaaa
158 #define CONFIG_SYS_GAFR2_U_VAL	0x29000308
159 #define CONFIG_SYS_GAFR3_L_VAL	0x54000000
160 #define CONFIG_SYS_GAFR3_U_VAL	0x000000d5
161 #define CONFIG_SYS_GPCR0_VAL	0x00000000
162 #define CONFIG_SYS_GPCR1_VAL	0x00000020
163 #define CONFIG_SYS_GPCR2_VAL	0x00000000
164 #define CONFIG_SYS_GPCR3_VAL	0x00000000
165 #define CONFIG_SYS_GPDR0_VAL	0xdafcee00
166 #define CONFIG_SYS_GPDR1_VAL	0xffa3aaab
167 #define CONFIG_SYS_GPDR2_VAL	0x8fe9ffff
168 #define CONFIG_SYS_GPDR3_VAL	0x001b1f8a
169 #define CONFIG_SYS_GPSR0_VAL	0x06080400
170 #define CONFIG_SYS_GPSR1_VAL	0x007f0000
171 #define CONFIG_SYS_GPSR2_VAL	0x032a0000
172 #define CONFIG_SYS_GPSR3_VAL	0x00000180
173 
174 #define CONFIG_SYS_PSSR_VAL	0x30
175 
176 /*
177  * Clock settings
178  */
179 #define CONFIG_SYS_CKEN		0x00511220
180 #define CONFIG_SYS_CCCR		0x00000190
181 
182 /*
183  * Memory settings
184  */
185 #define CONFIG_SYS_MSC0_VAL	0x2ffc38f8
186 #define CONFIG_SYS_MSC1_VAL	0x0000ccd1
187 #define CONFIG_SYS_MSC2_VAL	0x0000b884
188 #define CONFIG_SYS_MDCNFG_VAL	0x08000ba9
189 #define CONFIG_SYS_MDREFR_VAL	0x2011a01e
190 #define CONFIG_SYS_MDMRS_VAL	0x00000000
191 #define CONFIG_SYS_FLYCNFG_VAL	0x00010001
192 #define CONFIG_SYS_SXCNFG_VAL	0x40044004
193 
194 /*
195  * PCMCIA and CF Interfaces
196  */
197 #define CONFIG_SYS_MECR_VAL	0x00000001
198 #define CONFIG_SYS_MCMEM0_VAL	0x00014307
199 #define CONFIG_SYS_MCMEM1_VAL	0x00014307
200 #define CONFIG_SYS_MCATT0_VAL	0x0001c787
201 #define CONFIG_SYS_MCATT1_VAL	0x0001c787
202 #define CONFIG_SYS_MCIO0_VAL	0x0001430f
203 #define CONFIG_SYS_MCIO1_VAL	0x0001430f
204 
205 #include "pxa-common.h"
206 
207 #endif	/* __CONFIG_H */
208