1 /* 2 * Aeronix Zipit Z2 configuration file 3 * 4 * Copyright (C) 2009-2010 Marek Vasut <marek.vasut@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of 9 * the License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 19 * MA 02111-1307 USA 20 */ 21 22 #ifndef __CONFIG_H 23 #define __CONFIG_H 24 25 /* 26 * High Level Board Configuration Options 27 */ 28 #define CONFIG_PXA27X 1 /* Marvell PXA270 CPU */ 29 #define CONFIG_ZIPITZ2 1 /* Zipit Z2 board */ 30 31 #undef BOARD_LATE_INIT 32 #undef CONFIG_SKIP_RELOCATE_UBOOT 33 #undef CONFIG_USE_IRQ 34 #undef CONFIG_SKIP_LOWLEVEL_INIT 35 36 /* 37 * Environment settings 38 */ 39 #define CONFIG_ENV_OVERWRITE 40 #define CONFIG_ENV_IS_IN_FLASH 1 41 #define CONFIG_ENV_ADDR 0x40000 42 #define CONFIG_ENV_SIZE 0x20000 43 44 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + CONFIG_STACKSIZE) 45 #define CONFIG_SYS_GBL_DATA_SIZE 512 46 47 #define CONFIG_BOOTCOMMAND \ 48 "if mmc init && fatload mmc 0 0xa0000000 uboot.script ; then " \ 49 "source 0xa0000000; " \ 50 "else " \ 51 "bootm 0x60000; " \ 52 "fi; " 53 #define CONFIG_BOOTARGS \ 54 "console=tty0 console=ttyS2,115200 fbcon=rotate:3" 55 #define CONFIG_TIMESTAMP 56 #define CONFIG_BOOTDELAY 2 /* Autoboot delay */ 57 #define CONFIG_CMDLINE_TAG 58 #define CONFIG_SETUP_MEMORY_TAGS 59 60 #define CONFIG_LZMA /* LZMA compression support */ 61 62 /* 63 * Serial Console Configuration 64 * STUART - the lower serial port on Colibri board 65 */ 66 #define CONFIG_PXA_SERIAL 67 #define CONFIG_STUART 1 68 #define CONFIG_BAUDRATE 115200 69 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 70 71 /* 72 * Bootloader Components Configuration 73 */ 74 #include <config_cmd_default.h> 75 76 #undef CONFIG_CMD_NET 77 #define CONFIG_CMD_ENV 78 #undef CONFIG_CMD_IMLS 79 #define CONFIG_CMD_MMC 80 #define CONFIG_CMD_SPI 81 82 /* 83 * MMC Card Configuration 84 */ 85 #ifdef CONFIG_CMD_MMC 86 #define CONFIG_MMC 87 #define CONFIG_PXA_MMC 88 #define CONFIG_SYS_MMC_BASE 0xF0000000 89 #define CONFIG_CMD_FAT 90 #define CONFIG_CMD_EXT2 91 #define CONFIG_DOS_PARTITION 92 #endif 93 94 /* 95 * SPI and LCD 96 */ 97 #ifdef CONFIG_CMD_SPI 98 #define CONFIG_SOFT_SPI 99 #define CONFIG_LCD 100 #define CONFIG_LMS283GF05 101 #define CONFIG_VIDEO_LOGO 102 #define CONFIG_CMD_BMP 103 #define CONFIG_SPLASH_SCREEN 104 #define CONFIG_SPLASH_SCREEN_ALIGN 105 #define CONFIG_VIDEO_BMP_GZIP 106 #define CONFIG_VIDEO_BMP_RLE8 107 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE (2 << 20) 108 #undef SPI_INIT 109 110 #define SPI_DELAY udelay(10) 111 #define SPI_SDA(val) zipitz2_spi_sda(val) 112 #define SPI_SCL(val) zipitz2_spi_scl(val) 113 #define SPI_READ zipitz2_spi_read() 114 #ifndef __ASSEMBLY__ 115 void zipitz2_spi_sda(int); 116 void zipitz2_spi_scl(int); 117 unsigned char zipitz2_spi_read(void); 118 #endif 119 #endif 120 121 /* 122 * KGDB 123 */ 124 #ifdef CONFIG_CMD_KGDB 125 #define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ 126 #define CONFIG_KGDB_SER_INDEX 2 /* which serial port to use */ 127 #endif 128 129 /* 130 * HUSH Shell Configuration 131 */ 132 #define CONFIG_SYS_HUSH_PARSER 1 133 #define CONFIG_SYS_PROMPT_HUSH_PS2 "> " 134 135 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 136 #ifdef CONFIG_SYS_HUSH_PARSER 137 #define CONFIG_SYS_PROMPT "$ " /* Monitor Command Prompt */ 138 #else 139 #define CONFIG_SYS_PROMPT "=> " /* Monitor Command Prompt */ 140 #endif 141 #define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ 142 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */ 143 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 144 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */ 145 #define CONFIG_SYS_DEVICE_NULLDEV 1 146 147 /* 148 * Clock Configuration 149 */ 150 #undef CONFIG_SYS_CLKS_IN_HZ 151 #define CONFIG_SYS_HZ 3250000 /* Timer @ 3250000 Hz */ 152 #define CONFIG_SYS_CPUSPEED 0x190 /* standard setting for 312MHz; L=16, N=1.5, A=0, SDCLK!=SystemBus */ 153 154 /* 155 * Stack sizes 156 */ 157 #define CONFIG_STACKSIZE (128*1024) /* regular stack */ 158 #ifdef CONFIG_USE_IRQ 159 #define CONFIG_STACKSIZE_IRQ (4*1024) /* IRQ stack */ 160 #define CONFIG_STACKSIZE_FIQ (4*1024) /* FIQ stack */ 161 #endif 162 163 /* 164 * DRAM Map 165 */ 166 #define CONFIG_NR_DRAM_BANKS 1 /* We have 1 bank of DRAM */ 167 #define PHYS_SDRAM_1 0xa0000000 /* SDRAM Bank #1 */ 168 #define PHYS_SDRAM_1_SIZE 0x02000000 /* 32 MB */ 169 170 #define CONFIG_SYS_DRAM_BASE 0xa0000000 /* CS0 */ 171 #define CONFIG_SYS_DRAM_SIZE 0x02000000 /* 32 MB DRAM */ 172 173 #define CONFIG_SYS_MEMTEST_START 0xa0400000 /* memtest works on */ 174 #define CONFIG_SYS_MEMTEST_END 0xa0800000 /* 4 ... 8 MB in DRAM */ 175 176 #define CONFIG_SYS_LOAD_ADDR CONFIG_SYS_DRAM_BASE 177 178 /* 179 * NOR FLASH 180 */ 181 #define PHYS_FLASH_1 0x00000000 /* Flash Bank #1 */ 182 #define PHYS_FLASH_SIZE 0x00800000 /* 8 MB */ 183 #define PHYS_FLASH_SECT_SIZE 0x00010000 /* 64 KB sectors */ 184 #define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1 185 186 #define CONFIG_SYS_FLASH_CFI 187 #define CONFIG_FLASH_CFI_DRIVER 1 188 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT 189 190 #define CONFIG_SYS_MONITOR_BASE PHYS_FLASH_1 191 #define CONFIG_SYS_MONITOR_LEN PHYS_FLASH_SECT_SIZE 192 193 #define CONFIG_SYS_MAX_FLASH_BANKS 1 194 #define CONFIG_SYS_MAX_FLASH_SECT 256 195 196 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 197 198 #define CONFIG_SYS_FLASH_ERASE_TOUT (2*CONFIG_SYS_HZ) 199 #define CONFIG_SYS_FLASH_WRITE_TOUT (2*CONFIG_SYS_HZ) 200 #define CONFIG_SYS_FLASH_LOCK_TOUT (2*CONFIG_SYS_HZ) 201 #define CONFIG_SYS_FLASH_UNLOCK_TOUT (2*CONFIG_SYS_HZ) 202 #define CONFIG_SYS_FLASH_PROTECTION 203 204 /* 205 * GPIO settings 206 */ 207 #define CONFIG_SYS_GAFR0_L_VAL 0x02000140 208 #define CONFIG_SYS_GAFR0_U_VAL 0x59188000 209 #define CONFIG_SYS_GAFR1_L_VAL 0x63900002 210 #define CONFIG_SYS_GAFR1_U_VAL 0xaaa03950 211 #define CONFIG_SYS_GAFR2_L_VAL 0x0aaaaaaa 212 #define CONFIG_SYS_GAFR2_U_VAL 0x29000308 213 #define CONFIG_SYS_GAFR3_L_VAL 0x54000000 214 #define CONFIG_SYS_GAFR3_U_VAL 0x000000d5 215 #define CONFIG_SYS_GPCR0_VAL 0x00000000 216 #define CONFIG_SYS_GPCR1_VAL 0x00000020 217 #define CONFIG_SYS_GPCR2_VAL 0x00000000 218 #define CONFIG_SYS_GPCR3_VAL 0x00000000 219 #define CONFIG_SYS_GPDR0_VAL 0xdafcee00 220 #define CONFIG_SYS_GPDR1_VAL 0xffa3aaab 221 #define CONFIG_SYS_GPDR2_VAL 0x8fe1ffff 222 #define CONFIG_SYS_GPDR3_VAL 0x001b1f8a 223 #define CONFIG_SYS_GPSR0_VAL 0x06080400 224 #define CONFIG_SYS_GPSR1_VAL 0x007f0000 225 #define CONFIG_SYS_GPSR2_VAL 0x032a0000 226 #define CONFIG_SYS_GPSR3_VAL 0x00000180 227 228 #define CONFIG_SYS_PSSR_VAL 0x30 229 230 /* 231 * Clock settings 232 */ 233 #define CONFIG_SYS_CKEN 0x00511220 234 #define CONFIG_SYS_CCCR 0x00000190 235 236 /* 237 * Memory settings 238 */ 239 #define CONFIG_SYS_MSC0_VAL 0x2ffc38f8 240 #define CONFIG_SYS_MSC1_VAL 0x0000ccd1 241 #define CONFIG_SYS_MSC2_VAL 0x0000b884 242 #define CONFIG_SYS_MDCNFG_VAL 0x08000ba9 243 #define CONFIG_SYS_MDREFR_VAL 0x2011a01e 244 #define CONFIG_SYS_MDMRS_VAL 0x00000000 245 #define CONFIG_SYS_FLYCNFG_VAL 0x00010001 246 #define CONFIG_SYS_SXCNFG_VAL 0x40044004 247 248 /* 249 * PCMCIA and CF Interfaces 250 */ 251 #define CONFIG_SYS_MECR_VAL 0x00000001 252 #define CONFIG_SYS_MCMEM0_VAL 0x00014307 253 #define CONFIG_SYS_MCMEM1_VAL 0x00014307 254 #define CONFIG_SYS_MCATT0_VAL 0x0001c787 255 #define CONFIG_SYS_MCATT1_VAL 0x0001c787 256 #define CONFIG_SYS_MCIO0_VAL 0x0001430f 257 #define CONFIG_SYS_MCIO1_VAL 0x0001430f 258 259 #endif /* __CONFIG_H */ 260