1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * Configuration settings for the CCV xPress board 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __XPRESS_CONFIG_H 9 #define __XPRESS_CONFIG_H 10 11 #include "mx6_common.h" 12 #include <asm/imx-common/gpio.h> 13 14 /* SPL options */ 15 #define CONFIG_SPL_LIBCOMMON_SUPPORT 16 #define CONFIG_SPL_MMC_SUPPORT 17 #include "imx6_spl.h" 18 19 #define CONFIG_DISPLAY_CPUINFO 20 #define CONFIG_DISPLAY_BOARDINFO 21 22 /* Size of malloc() pool */ 23 #define CONFIG_SYS_MALLOC_LEN (16 << 20) 24 25 #define CONFIG_BOARD_EARLY_INIT_F 26 #define CONFIG_BOARD_LATE_INIT 27 28 #define CONFIG_MXC_UART 29 #define CONFIG_MXC_UART_BASE UART1_BASE 30 31 /* MMC Configs */ 32 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 33 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 34 35 /* I2C configs */ 36 #define CONFIG_SYS_I2C 37 #define CONFIG_SYS_I2C_MXC 38 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 39 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 40 #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ 41 #define CONFIG_SYS_I2C_SPEED 100000 42 43 /* Miscellaneous configurable options */ 44 #define CONFIG_SYS_MEMTEST_START 0x80000000 45 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) 46 47 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 48 #define CONFIG_SYS_HZ 1000 49 50 #define CONFIG_SYS_CONSOLE_INFO_QUIET 51 #define CONFIG_CMDLINE_EDITING 52 53 /* Physical Memory Map */ 54 #define CONFIG_NR_DRAM_BANKS 1 55 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 56 #define PHYS_SDRAM_SIZE (128 << 20) 57 58 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 59 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 60 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 61 62 #define CONFIG_SYS_INIT_SP_OFFSET \ 63 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 64 #define CONFIG_SYS_INIT_SP_ADDR \ 65 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 66 67 /* FLASH and environment organization */ 68 #define CONFIG_SYS_NO_FLASH 69 70 /* Environment is in stored in the eMMC boot partition */ 71 #define CONFIG_ENV_SIZE (16 << 10) 72 #define CONFIG_ENV_IS_IN_MMC 73 #define CONFIG_ENV_OFFSET (512 << 10) 74 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */ 75 #define CONFIG_SYS_MMC_ENV_PART 1 /* boot parition */ 76 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */ 77 78 #define CONFIG_CMD_BMODE 79 80 /* USB Configs */ 81 #define CONFIG_USB_EHCI 82 #define CONFIG_USB_EHCI_MX6 83 #define CONFIG_USB_STORAGE 84 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 85 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 86 #define CONFIG_MXC_USB_FLAGS 0 87 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 88 89 #define CONFIG_FEC_MXC 90 #define CONFIG_MII 91 #define CONFIG_FEC_ENET_DEV 0 92 #define IMX_FEC_BASE ENET_BASE_ADDR 93 #define CONFIG_FEC_MXC_PHYADDR 0x0 94 #define CONFIG_FEC_XCV_TYPE RMII 95 #define CONFIG_ETHPRIME "FEC" 96 #define CONFIG_PHYLIB 97 #define CONFIG_PHY_SMSC 98 99 #define CONFIG_IMX_THERMAL 100 101 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 102 103 #define CONFIG_UBOOT_SECTOR_START 0x2 104 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe 105 106 #define CONFIG_EXTRA_ENV_SETTINGS \ 107 "script=boot.scr\0" \ 108 "image=zImage\0" \ 109 "console=ttymxc0\0" \ 110 "fdt_high=0xffffffff\0" \ 111 "initrd_high=0xffffffff\0" \ 112 "fdt_file=undefined\0" \ 113 "fdt_addr=0x83000000\0" \ 114 "boot_fdt=try\0" \ 115 "ip_dyn=yes\0" \ 116 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 117 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 118 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 119 "mmcautodetect=yes\0" \ 120 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 121 "root=${mmcroot}\0" \ 122 "loadbootscript=" \ 123 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 124 "bootscript=echo Running bootscript from mmc ...; " \ 125 "source\0" \ 126 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 127 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 128 "mmcboot=echo Booting from mmc ...; " \ 129 "run mmcargs; " \ 130 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 131 "if run loadfdt; then " \ 132 "bootz ${loadaddr} - ${fdt_addr}; " \ 133 "else " \ 134 "if test ${boot_fdt} = try; then " \ 135 "bootz; " \ 136 "else " \ 137 "echo WARN: Cannot load the DT; " \ 138 "fi; " \ 139 "fi; " \ 140 "else " \ 141 "bootz; " \ 142 "fi;\0" \ 143 "uboot=ccv/u-boot.imx\0" \ 144 "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ 145 "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ 146 "update_uboot=if tftp ${uboot}; then " \ 147 "if itest ${filesize} > 0; then " \ 148 "mmc dev 0 1;" \ 149 "setexpr blkc ${filesize} / 0x200;" \ 150 "setexpr blkc ${blkc} + 1;" \ 151 "if itest ${blkc} <= ${uboot_size}; then " \ 152 "mmc write ${loadaddr} ${uboot_start} " \ 153 "${blkc};" \ 154 "fi;" \ 155 "fi; fi;" \ 156 "setenv filesize; setenv blkc\0" \ 157 "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0" 158 159 #endif /* __XPRESS_CONFIG_H */ 160