1 /* 2 * Copyright (C) 2015-2016 Stefan Roese <sr@denx.de> 3 * 4 * Configuration settings for the CCV xPress board 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 #ifndef __XPRESS_CONFIG_H 9 #define __XPRESS_CONFIG_H 10 11 #include "mx6_common.h" 12 #include <asm/imx-common/gpio.h> 13 14 /* SPL options */ 15 #include "imx6_spl.h" 16 17 /* Size of malloc() pool */ 18 #define CONFIG_SYS_MALLOC_LEN (16 << 20) 19 20 #define CONFIG_BOARD_EARLY_INIT_F 21 #define CONFIG_BOARD_LATE_INIT 22 23 #define CONFIG_MXC_UART 24 #define CONFIG_MXC_UART_BASE UART1_BASE 25 26 /* MMC Configs */ 27 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 28 #define CONFIG_SUPPORT_EMMC_BOOT /* eMMC specific */ 29 30 /* I2C configs */ 31 #define CONFIG_SYS_I2C 32 #define CONFIG_SYS_I2C_MXC 33 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 34 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 35 #define CONFIG_SYS_I2C_MXC_I2C4 /* enable I2C bus 4 */ 36 #define CONFIG_SYS_I2C_SPEED 100000 37 38 /* Miscellaneous configurable options */ 39 #define CONFIG_SYS_MEMTEST_START 0x80000000 40 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000000) 41 42 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 43 #define CONFIG_SYS_HZ 1000 44 45 #define CONFIG_SYS_CONSOLE_INFO_QUIET 46 #define CONFIG_CMDLINE_EDITING 47 48 /* Physical Memory Map */ 49 #define CONFIG_NR_DRAM_BANKS 1 50 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 51 #define PHYS_SDRAM_SIZE (128 << 20) 52 53 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 54 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 55 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 56 57 #define CONFIG_SYS_INIT_SP_OFFSET \ 58 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 59 #define CONFIG_SYS_INIT_SP_ADDR \ 60 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 61 62 /* FLASH and environment organization */ 63 #define CONFIG_SYS_NO_FLASH 64 65 /* Environment is in stored in the eMMC boot partition */ 66 #define CONFIG_ENV_SIZE (16 << 10) 67 #define CONFIG_ENV_IS_IN_MMC 68 #define CONFIG_ENV_OFFSET (512 << 10) 69 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC2 */ 70 #define CONFIG_SYS_MMC_ENV_PART 1 /* boot parition */ 71 #define CONFIG_MMCROOT "/dev/mmcblk0p2" /* USDHC2 */ 72 73 #define CONFIG_CMD_BMODE 74 75 /* USB Configs */ 76 #define CONFIG_USB_EHCI 77 #define CONFIG_USB_EHCI_MX6 78 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 79 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 80 #define CONFIG_MXC_USB_FLAGS 0 81 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 82 83 #define CONFIG_FEC_MXC 84 #define CONFIG_MII 85 #define CONFIG_FEC_ENET_DEV 0 86 #define IMX_FEC_BASE ENET_BASE_ADDR 87 #define CONFIG_FEC_MXC_PHYADDR 0x0 88 #define CONFIG_FEC_XCV_TYPE RMII 89 #define CONFIG_ETHPRIME "FEC" 90 #define CONFIG_PHYLIB 91 #define CONFIG_PHY_SMSC 92 93 #define CONFIG_IMX_THERMAL 94 95 #define CONFIG_SYS_MMC_IMG_LOAD_PART 1 96 97 #define CONFIG_UBOOT_SECTOR_START 0x2 98 #define CONFIG_UBOOT_SECTOR_COUNT 0x3fe 99 100 #define CONFIG_EXTRA_ENV_SETTINGS \ 101 "script=boot.scr\0" \ 102 "image=zImage\0" \ 103 "console=ttymxc0\0" \ 104 "fdt_high=0xffffffff\0" \ 105 "initrd_high=0xffffffff\0" \ 106 "fdt_file=undefined\0" \ 107 "fdt_addr=0x83000000\0" \ 108 "boot_fdt=try\0" \ 109 "ip_dyn=yes\0" \ 110 "mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \ 111 "mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \ 112 "mmcroot=" CONFIG_MMCROOT " rootwait rw\0" \ 113 "mmcautodetect=yes\0" \ 114 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 115 "root=${mmcroot}\0" \ 116 "loadbootscript=" \ 117 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 118 "bootscript=echo Running bootscript from mmc ...; " \ 119 "source\0" \ 120 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 121 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 122 "mmcboot=echo Booting from mmc ...; " \ 123 "run mmcargs; " \ 124 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 125 "if run loadfdt; then " \ 126 "bootz ${loadaddr} - ${fdt_addr}; " \ 127 "else " \ 128 "if test ${boot_fdt} = try; then " \ 129 "bootz; " \ 130 "else " \ 131 "echo WARN: Cannot load the DT; " \ 132 "fi; " \ 133 "fi; " \ 134 "else " \ 135 "bootz; " \ 136 "fi;\0" \ 137 "uboot=ccv/u-boot.imx\0" \ 138 "uboot_start="__stringify(CONFIG_UBOOT_SECTOR_START)"\0" \ 139 "uboot_size="__stringify(CONFIG_UBOOT_SECTOR_COUNT)"\0" \ 140 "update_uboot=if tftp ${uboot}; then " \ 141 "if itest ${filesize} > 0; then " \ 142 "mmc dev 0 1;" \ 143 "setexpr blkc ${filesize} / 0x200;" \ 144 "setexpr blkc ${blkc} + 1;" \ 145 "if itest ${blkc} <= ${uboot_size}; then " \ 146 "mmc write ${loadaddr} ${uboot_start} " \ 147 "${blkc};" \ 148 "fi;" \ 149 "fi; fi;" \ 150 "setenv filesize; setenv blkc\0" \ 151 "update_bootpart=mmc bootbus 0 2 1 2;mmc partconf 0 1 1 0\0" 152 153 #endif /* __XPRESS_CONFIG_H */ 154