1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Configuration for Xilinx ZynqMP 4 * (C) Copyright 2014 - 2015 Xilinx, Inc. 5 * Michal Simek <michal.simek@xilinx.com> 6 * 7 * Based on Configuration for Versatile Express 8 */ 9 10 #ifndef __XILINX_ZYNQMP_H 11 #define __XILINX_ZYNQMP_H 12 13 #define CONFIG_REMAKE_ELF 14 15 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */ 16 17 /* Generic Interrupt Controller Definitions */ 18 #define CONFIG_GICV2 19 #define GICD_BASE 0xF9010000 20 #define GICC_BASE 0xF9020000 21 22 #ifndef CONFIG_SYS_MEMTEST_SCRATCH 23 # define CONFIG_SYS_MEMTEST_SCRATCH 0x10800000 24 #endif 25 26 #ifndef CONFIG_NR_DRAM_BANKS 27 # define CONFIG_NR_DRAM_BANKS 2 28 #endif 29 #define CONFIG_SYS_MEMTEST_START 0 30 #define CONFIG_SYS_MEMTEST_END 1000 31 32 #define CONFIG_SYS_INIT_SP_ADDR CONFIG_SYS_TEXT_BASE 33 34 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */ 35 #if !defined(COUNTER_FREQUENCY) 36 # define COUNTER_FREQUENCY 100000000 37 #endif 38 39 /* Size of malloc() pool */ 40 #define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 0x2000000) 41 42 /* Serial setup */ 43 #define CONFIG_ARM_DCC 44 #define CONFIG_CPU_ARMV8 45 46 #define CONFIG_SYS_BAUDRATE_TABLE \ 47 { 4800, 9600, 19200, 38400, 57600, 115200 } 48 49 /* BOOTP options */ 50 #define CONFIG_BOOTP_BOOTFILESIZE 51 #define CONFIG_BOOTP_MAY_FAIL 52 53 #if defined(CONFIG_MMC_SDHCI_ZYNQ) 54 # define CONFIG_SUPPORT_EMMC_BOOT 55 #endif 56 57 #ifdef CONFIG_NAND_ARASAN 58 # define CONFIG_SYS_MAX_NAND_DEVICE 1 59 # define CONFIG_SYS_NAND_ONFI_DETECTION 60 #endif 61 62 #if defined(CONFIG_SPL_BUILD) 63 #define CONFIG_ZYNQMP_PSU_INIT_ENABLED 64 #endif 65 66 /* Miscellaneous configurable options */ 67 #define CONFIG_SYS_LOAD_ADDR 0x8000000 68 69 #if defined(CONFIG_ZYNQMP_USB) 70 #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 71 #define DFU_DEFAULT_POLL_TIMEOUT 300 72 #define CONFIG_USB_CABLE_CHECK 73 #define CONFIG_THOR_RESET_OFF 74 #define DFU_ALT_INFO_RAM \ 75 "dfu_ram_info=" \ 76 "setenv dfu_alt_info " \ 77 "Image ram $kernel_addr $kernel_size\\\\;" \ 78 "system.dtb ram $fdt_addr $fdt_size\0" \ 79 "dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \ 80 "thor_ram=run dfu_ram_info && thordown 0 ram 0\0" 81 82 #define DFU_ALT_INFO \ 83 DFU_ALT_INFO_RAM 84 85 #ifndef CONFIG_SPL_BUILD 86 # define PARTS_DEFAULT \ 87 "partitions=uuid_disk=${uuid_gpt_disk};" \ 88 "name=""boot"",size=16M,uuid=${uuid_gpt_boot};" \ 89 "name=""Linux"",size=-M,uuid=${uuid_gpt_Linux}\0" 90 #endif 91 #endif 92 93 #if !defined(DFU_ALT_INFO) 94 # define DFU_ALT_INFO 95 #endif 96 97 #if !defined(PARTS_DEFAULT) 98 # define PARTS_DEFAULT 99 #endif 100 101 /* Monitor Command Prompt */ 102 /* Console I/O Buffer Size */ 103 #define CONFIG_SYS_CBSIZE 2048 104 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 105 #define CONFIG_PANIC_HANG 106 #define CONFIG_SYS_MAXARGS 64 107 108 /* Ethernet driver */ 109 #if defined(CONFIG_ZYNQ_GEM) 110 # define CONFIG_MII 111 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 112 # define PHY_ANEG_TIMEOUT 20000 113 #endif 114 115 /* I2C */ 116 #if defined(CONFIG_SYS_I2C_ZYNQ) 117 # define CONFIG_SYS_I2C 118 #endif 119 120 /* EEPROM */ 121 #ifdef CONFIG_ZYNQMP_EEPROM 122 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 123 # define CONFIG_SYS_I2C_EEPROM_ADDR 0x54 124 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 4 125 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 5 126 # define CONFIG_SYS_EEPROM_SIZE (64 * 1024) 127 #endif 128 129 #ifdef CONFIG_SATA_CEVA 130 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 131 #define CONFIG_SYS_SCSI_MAX_LUN 1 132 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 133 CONFIG_SYS_SCSI_MAX_LUN) 134 #endif 135 136 #define CONFIG_SYS_BOOTM_LEN (60 * 1024 * 1024) 137 138 #define CONFIG_CLOCKS 139 140 #define ENV_MEM_LAYOUT_SETTINGS \ 141 "fdt_high=10000000\0" \ 142 "initrd_high=10000000\0" \ 143 "fdt_addr_r=0x40000000\0" \ 144 "pxefile_addr_r=0x10000000\0" \ 145 "kernel_addr_r=0x18000000\0" \ 146 "scriptaddr=0x02000000\0" \ 147 "ramdisk_addr_r=0x02100000\0" \ 148 149 #if defined(CONFIG_MMC_SDHCI_ZYNQ) 150 # define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) func(MMC, mmc, 1) 151 #else 152 # define BOOT_TARGET_DEVICES_MMC(func) 153 #endif 154 155 #if defined(CONFIG_SATA_CEVA) 156 # define BOOT_TARGET_DEVICES_SCSI(func) func(SCSI, scsi, 0) 157 #else 158 # define BOOT_TARGET_DEVICES_SCSI(func) 159 #endif 160 161 #if defined(CONFIG_ZYNQMP_USB) 162 # define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) func(USB, usb, 1) 163 #else 164 # define BOOT_TARGET_DEVICES_USB(func) 165 #endif 166 167 #if defined(CONFIG_CMD_PXE) && defined(CONFIG_CMD_DHCP) 168 # define BOOT_TARGET_DEVICES_PXE(func) func(PXE, pxe, na) 169 #else 170 # define BOOT_TARGET_DEVICES_PXE(func) 171 #endif 172 173 #if defined(CONFIG_CMD_DHCP) 174 # define BOOT_TARGET_DEVICES_DHCP(func) func(DHCP, dhcp, na) 175 #else 176 # define BOOT_TARGET_DEVICES_DHCP(func) 177 #endif 178 179 #define BOOT_TARGET_DEVICES(func) \ 180 BOOT_TARGET_DEVICES_MMC(func) \ 181 BOOT_TARGET_DEVICES_USB(func) \ 182 BOOT_TARGET_DEVICES_SCSI(func) \ 183 BOOT_TARGET_DEVICES_PXE(func) \ 184 BOOT_TARGET_DEVICES_DHCP(func) 185 186 #include <config_distro_bootcmd.h> 187 188 /* Initial environment variables */ 189 #ifndef CONFIG_EXTRA_ENV_SETTINGS 190 #define CONFIG_EXTRA_ENV_SETTINGS \ 191 ENV_MEM_LAYOUT_SETTINGS \ 192 BOOTENV \ 193 DFU_ALT_INFO 194 #endif 195 196 /* SPL can't handle all huge variables - define just DFU */ 197 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) 198 #undef CONFIG_EXTRA_ENV_SETTINGS 199 # define CONFIG_EXTRA_ENV_SETTINGS \ 200 "dfu_alt_info_ram=uboot.bin ram 0x8000000 0x1000000;" \ 201 "atf-uboot.ub ram 0x10000000 0x1000000;" \ 202 "Image ram 0x80000 0x3f80000;" \ 203 "system.dtb ram 0x4000000 0x100000\0" \ 204 "dfu_bufsiz=0x1000\0" 205 #endif 206 207 #define CONFIG_SPL_TEXT_BASE 0xfffc0000 208 #define CONFIG_SPL_STACK 0xfffffffc 209 #define CONFIG_SPL_MAX_SIZE 0x40000 210 211 /* Just random location in OCM */ 212 #define CONFIG_SPL_BSS_START_ADDR 0x0 213 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 214 215 #if defined(CONFIG_SPL_SPI_FLASH_SUPPORT) 216 # define CONFIG_SYS_SPI_KERNEL_OFFS 0x80000 217 # define CONFIG_SYS_SPI_ARGS_OFFS 0xa0000 218 # define CONFIG_SYS_SPI_ARGS_SIZE 0xa0000 219 220 # define CONFIG_SYS_SPI_U_BOOT_OFFS 0x170000 221 #endif 222 223 /* u-boot is like dtb */ 224 #define CONFIG_SPL_FS_LOAD_ARGS_NAME "u-boot.bin" 225 #define CONFIG_SYS_SPL_ARGS_ADDR 0x8000000 226 227 /* ATF is my kernel image */ 228 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME "atf-uboot.ub" 229 230 /* FIT load address for RAM boot */ 231 #define CONFIG_SPL_LOAD_FIT_ADDRESS 0x10000000 232 233 /* MMC support */ 234 #ifdef CONFIG_MMC_SDHCI_ZYNQ 235 # define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1 236 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR 0 /* unused */ 237 # define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS 0 /* unused */ 238 # define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0 /* unused */ 239 # define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img" 240 #endif 241 242 #if defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_DFU_SUPPORT) 243 # undef CONFIG_CMD_BOOTD 244 # define CONFIG_SPL_ENV_SUPPORT 245 # define CONFIG_SPL_HASH_SUPPORT 246 # define CONFIG_ENV_MAX_ENTRIES 10 247 #endif 248 249 #define CONFIG_SYS_SPL_MALLOC_START 0x20000000 250 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000 251 252 #ifdef CONFIG_SPL_SYS_MALLOC_SIMPLE 253 # error "Disable CONFIG_SPL_SYS_MALLOC_SIMPLE. Full malloc needs to be used" 254 #endif 255 256 #define CONFIG_BOARD_EARLY_INIT_F 257 258 #endif /* __XILINX_ZYNQMP_H */ 259