1 /*
2  * Configuration for Xilinx ZynqMP
3  * (C) Copyright 2014 - 2015 Xilinx, Inc.
4  * Michal Simek <michal.simek@xilinx.com>
5  *
6  * Based on Configuration for Versatile Express
7  *
8  * SPDX-License-Identifier:	GPL-2.0+
9  */
10 
11 #ifndef __XILINX_ZYNQMP_H
12 #define __XILINX_ZYNQMP_H
13 
14 #define CONFIG_REMAKE_ELF
15 
16 /* #define CONFIG_ARMV8_SWITCH_TO_EL1 */
17 
18 #define CONFIG_SYS_NO_FLASH
19 
20 /* Generic Interrupt Controller Definitions */
21 #define CONFIG_GICV2
22 #define GICD_BASE	0xF9010000
23 #define GICC_BASE	0xF9020000
24 
25 #define CONFIG_SYS_ALT_MEMTEST
26 #define CONFIG_SYS_MEMTEST_SCRATCH	0xfffc0000
27 
28 #ifndef CONFIG_NR_DRAM_BANKS
29 # define CONFIG_NR_DRAM_BANKS		2
30 #endif
31 #define CONFIG_SYS_MEMTEST_START	0
32 #define CONFIG_SYS_MEMTEST_END		1000
33 
34 /* Have release address at the end of 256MB for now */
35 #define CPU_RELEASE_ADDR	0xFFFFFF0
36 
37 /* Cache Definitions */
38 #define CONFIG_SYS_CACHELINE_SIZE	64
39 
40 #if !defined(CONFIG_IDENT_STRING)
41 # define CONFIG_IDENT_STRING		" Xilinx ZynqMP"
42 #endif
43 
44 #define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_TEXT_BASE
45 
46 /* Generic Timer Definitions - setup in EL3. Setup by ATF for other cases */
47 #if !defined(COUNTER_FREQUENCY)
48 # define COUNTER_FREQUENCY		100000000
49 #endif
50 
51 /* Size of malloc() pool */
52 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 0x2000000)
53 
54 /* Serial setup */
55 #define CONFIG_ARM_DCC
56 #define CONFIG_CPU_ARMV8
57 #define CONFIG_ZYNQ_SERIAL
58 
59 #define CONFIG_CONS_INDEX		0
60 #define CONFIG_BAUDRATE			115200
61 #define CONFIG_SYS_BAUDRATE_TABLE \
62 	{ 4800, 9600, 19200, 38400, 57600, 115200 }
63 
64 /* Command line configuration */
65 #define CONFIG_CMD_ENV
66 #define CONFIG_DOS_PARTITION
67 #define CONFIG_EFI_PARTITION
68 #define CONFIG_MP
69 
70 /* BOOTP options */
71 #define CONFIG_BOOTP_BOOTFILESIZE
72 #define CONFIG_BOOTP_BOOTPATH
73 #define CONFIG_BOOTP_GATEWAY
74 #define CONFIG_BOOTP_HOSTNAME
75 #define CONFIG_BOOTP_MAY_FAIL
76 #define CONFIG_BOOTP_SERVERIP
77 
78 #if defined(CONFIG_ZYNQ_SDHCI)
79 # define CONFIG_MMC
80 # define CONFIG_GENERIC_MMC
81 # define CONFIG_SDHCI
82 # ifndef CONFIG_ZYNQ_SDHCI_MAX_FREQ
83 #  define CONFIG_ZYNQ_SDHCI_MAX_FREQ	200000000
84 # endif
85 #endif
86 
87 #if defined(CONFIG_ZYNQ_SDHCI) || defined(CONFIG_ZYNQMP_USB)
88 # define CONFIG_FAT_WRITE
89 #endif
90 
91 #ifdef CONFIG_NAND_ARASAN
92 # define CONFIG_CMD_NAND
93 # define CONFIG_CMD_NAND_LOCK_UNLOCK
94 # define CONFIG_SYS_MAX_NAND_DEVICE	1
95 # define CONFIG_SYS_NAND_SELF_INIT
96 # define CONFIG_SYS_NAND_ONFI_DETECTION
97 # define CONFIG_MTD_DEVICE
98 #endif
99 
100 /* Miscellaneous configurable options */
101 #define CONFIG_SYS_LOAD_ADDR		0x8000000
102 
103 #if defined(CONFIG_ZYNQMP_USB)
104 #define CONFIG_USB_XHCI_DWC3
105 #define CONFIG_USB_XHCI
106 #define CONFIG_USB_MAX_CONTROLLER_COUNT         1
107 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      2
108 #define CONFIG_USB_STORAGE
109 #define CONFIG_USB_XHCI_ZYNQMP
110 
111 #define CONFIG_SYS_DFU_DATA_BUF_SIZE	0x1800000
112 #define DFU_DEFAULT_POLL_TIMEOUT	300
113 #define CONFIG_USB_FUNCTION_DFU
114 #define CONFIG_DFU_RAM
115 #define CONFIG_USB_CABLE_CHECK
116 #define CONFIG_CMD_THOR_DOWNLOAD
117 #define CONFIG_USB_FUNCTION_THOR
118 #define CONFIG_THOR_RESET_OFF
119 #define DFU_ALT_INFO_RAM \
120 	"dfu_ram_info=" \
121 	"setenv dfu_alt_info " \
122 	"Image ram $kernel_addr $kernel_size\\\\;" \
123 	"system.dtb ram $fdt_addr $fdt_size\0" \
124 	"dfu_ram=run dfu_ram_info && dfu 0 ram 0\0" \
125 	"thor_ram=run dfu_ram_info && thordown 0 ram 0\0"
126 
127 #define DFU_ALT_INFO  \
128 		DFU_ALT_INFO_RAM
129 #endif
130 
131 #if !defined(DFU_ALT_INFO)
132 # define DFU_ALT_INFO
133 #endif
134 
135 /* Initial environment variables */
136 #define CONFIG_EXTRA_ENV_SETTINGS \
137 	"kernel_addr=0x80000\0" \
138 	"fdt_addr=0x7000000\0" \
139 	"fdt_high=0x10000000\0" \
140 	CONFIG_KERNEL_FDT_OFST_SIZE \
141 	"sdbootdev=0\0"\
142 	"sdboot=mmc dev $sdbootdev && mmcinfo && load mmc $sdbootdev:$partid $fdt_addr system.dtb && " \
143 		"load mmc $sdbootdev:$partid $kernel_addr Image && " \
144 		"booti $kernel_addr - $fdt_addr\0" \
145 	DFU_ALT_INFO
146 
147 #define CONFIG_PREBOOT		"run bootargs"
148 #define CONFIG_BOOTCOMMAND	"run $modeboot"
149 #define CONFIG_BOOTDELAY	3
150 
151 #define CONFIG_BOARD_LATE_INIT
152 
153 /* Do not preserve environment */
154 #define CONFIG_ENV_IS_NOWHERE		1
155 #define CONFIG_ENV_SIZE			0x1000
156 
157 /* Monitor Command Prompt */
158 /* Console I/O Buffer Size */
159 #define CONFIG_SYS_CBSIZE		2048
160 #define CONFIG_SYS_PBSIZE		(CONFIG_SYS_CBSIZE + \
161 					sizeof(CONFIG_SYS_PROMPT) + 16)
162 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
163 #define CONFIG_SYS_LONGHELP
164 #define CONFIG_CMDLINE_EDITING
165 #define CONFIG_SYS_MAXARGS		64
166 
167 /* Ethernet driver */
168 #if defined(CONFIG_ZYNQ_GEM)
169 # define CONFIG_NET_MULTI
170 # define CONFIG_MII
171 # define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
172 # define CONFIG_PHY_MARVELL
173 # define CONFIG_PHY_NATSEMI
174 # define CONFIG_PHY_TI
175 # define CONFIG_PHY_GIGE
176 # define PHY_ANEG_TIMEOUT       20000
177 #endif
178 
179 /* I2C */
180 #if defined(CONFIG_SYS_I2C_ZYNQ)
181 # define CONFIG_SYS_I2C
182 # define CONFIG_SYS_I2C_ZYNQ_SPEED		100000
183 # define CONFIG_SYS_I2C_ZYNQ_SLAVE		0
184 #endif
185 
186 /* EEPROM */
187 #ifdef CONFIG_ZYNQMP_EEPROM
188 # define CONFIG_CMD_EEPROM
189 # define CONFIG_SYS_I2C_EEPROM_ADDR_LEN		2
190 # define CONFIG_SYS_I2C_EEPROM_ADDR		0x54
191 # define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS	4
192 # define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS	5
193 # define CONFIG_SYS_EEPROM_SIZE			(64 * 1024)
194 #endif
195 
196 #ifdef CONFIG_AHCI
197 #define CONFIG_LIBATA
198 #define CONFIG_SCSI_AHCI
199 #define CONFIG_SCSI_AHCI_PLAT
200 #define CONFIG_SYS_SCSI_MAX_SCSI_ID	2
201 #define CONFIG_SYS_SCSI_MAX_LUN		1
202 #define CONFIG_SYS_SCSI_MAX_DEVICE	(CONFIG_SYS_SCSI_MAX_SCSI_ID * \
203 					 CONFIG_SYS_SCSI_MAX_LUN)
204 #define CONFIG_SCSI
205 #endif
206 
207 #define CONFIG_SYS_BOOTM_LEN	(60 * 1024 * 1024)
208 
209 #define CONFIG_CMD_BOOTI
210 #define CONFIG_CMD_UNZIP
211 
212 #define CONFIG_BOARD_EARLY_INIT_R
213 #define CONFIG_CLOCKS
214 
215 #endif /* __XILINX_ZYNQMP_H */
216