1 /* 2 * WORK Microwave work_92105 board configuration file 3 * 4 * (C) Copyright 2014 DENX Software Engineering GmbH 5 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_WORK_92105_H__ 11 #define __CONFIG_WORK_92105_H__ 12 13 /* SoC and board defines */ 14 #include <linux/sizes.h> 15 #include <asm/arch/cpu.h> 16 17 /* 18 * Define work_92105 machine type by hand -- done only for compatibility 19 * with original board code 20 */ 21 #define CONFIG_MACH_TYPE 736 22 23 #define CONFIG_SYS_ICACHE_OFF 24 #define CONFIG_SYS_DCACHE_OFF 25 #if !defined(CONFIG_SPL_BUILD) 26 #define CONFIG_SKIP_LOWLEVEL_INIT 27 #endif 28 #define CONFIG_BOARD_EARLY_INIT_R 29 30 /* generate LPC32XX-specific SPL image */ 31 #define CONFIG_LPC32XX_SPL 32 33 /* 34 * Memory configurations 35 */ 36 #define CONFIG_NR_DRAM_BANKS 1 37 #define CONFIG_SYS_MALLOC_LEN SZ_1M 38 #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE 39 #define CONFIG_SYS_SDRAM_SIZE SZ_128M 40 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) 41 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M) 42 43 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) 44 45 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ 46 - GENERATED_GBL_DATA_SIZE) 47 48 /* 49 * Serial Driver 50 */ 51 #define CONFIG_SYS_LPC32XX_UART 5 /* UART5 - NS16550 */ 52 53 /* 54 * Ethernet Driver 55 */ 56 57 #define CONFIG_PHY_SMSC 58 #define CONFIG_LPC32XX_ETH 59 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 60 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */ 61 62 /* 63 * I2C driver 64 */ 65 66 #define CONFIG_SYS_I2C_LPC32XX 67 #define CONFIG_SYS_I2C 68 #define CONFIG_SYS_I2C_SPEED 350000 69 70 /* 71 * I2C EEPROM 72 */ 73 74 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 75 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 76 77 /* 78 * I2C RTC 79 */ 80 81 #define CONFIG_RTC_DS1374 82 83 /* 84 * U-Boot General Configurations 85 */ 86 #define CONFIG_SYS_CBSIZE 1024 87 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 88 89 /* 90 * NAND chip timings for FIXME: which one? 91 */ 92 93 #define CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY 333333333 94 #define CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY 10000000 95 #define CONFIG_LPC32XX_NAND_MLC_NAND_TA 18181818 96 #define CONFIG_LPC32XX_NAND_MLC_RD_HIGH 31250000 97 #define CONFIG_LPC32XX_NAND_MLC_RD_LOW 45454545 98 #define CONFIG_LPC32XX_NAND_MLC_WR_HIGH 40000000 99 #define CONFIG_LPC32XX_NAND_MLC_WR_LOW 83333333 100 101 /* 102 * NAND 103 */ 104 105 /* driver configuration */ 106 #define CONFIG_SYS_NAND_SELF_INIT 107 #define CONFIG_SYS_MAX_NAND_DEVICE 1 108 #define CONFIG_SYS_MAX_NAND_CHIPS 1 109 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE 110 #define CONFIG_NAND_LPC32XX_MLC 111 112 /* 113 * GPIO 114 */ 115 116 #define CONFIG_LPC32XX_GPIO 117 118 /* 119 * SSP/SPI/DISPLAY 120 */ 121 122 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000 123 /* 124 * Environment 125 */ 126 127 #define CONFIG_ENV_SIZE 0x00020000 128 #define CONFIG_ENV_OFFSET 0x00100000 129 #define CONFIG_ENV_OFFSET_REDUND 0x00120000 130 #define CONFIG_ENV_ADDR 0x80000100 131 132 /* 133 * Boot Linux 134 */ 135 #define CONFIG_CMDLINE_TAG 136 #define CONFIG_SETUP_MEMORY_TAGS 137 #define CONFIG_INITRD_TAG 138 139 #define CONFIG_BOOTFILE "uImage" 140 #define CONFIG_LOADADDR 0x80008000 141 142 /* 143 * SPL 144 */ 145 146 /* SPL will be executed at offset 0 */ 147 #define CONFIG_SPL_TEXT_BASE 0x00000000 148 /* SPL will use SRAM as stack */ 149 #define CONFIG_SPL_STACK 0x0000FFF8 150 /* Use the framework and generic lib */ 151 /* SPL will use serial */ 152 /* SPL will load U-Boot from NAND offset 0x40000 */ 153 #define CONFIG_SPL_NAND_DRIVERS 154 #define CONFIG_SPL_NAND_BASE 155 #define CONFIG_SPL_NAND_BOOT 156 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000 157 #define CONFIG_SPL_PAD_TO 0x20000 158 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */ 159 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */ 160 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 161 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 162 163 /* 164 * Include SoC specific configuration 165 */ 166 #include <asm/arch/config.h> 167 168 #endif /* __CONFIG_WORK_92105_H__*/ 169