1 /* 2 * WORK Microwave work_92105 board configuration file 3 * 4 * (C) Copyright 2014 DENX Software Engineering GmbH 5 * Written-by: Albert ARIBAUD <albert.aribaud@3adev.fr> 6 * 7 * SPDX-License-Identifier: GPL-2.0+ 8 */ 9 10 #ifndef __CONFIG_WORK_92105_H__ 11 #define __CONFIG_WORK_92105_H__ 12 13 /* SoC and board defines */ 14 #include <linux/sizes.h> 15 #include <asm/arch/cpu.h> 16 17 /* 18 * Define work_92105 machine type by hand -- done only for compatibility 19 * with original board code 20 */ 21 #define CONFIG_MACH_TYPE 736 22 23 #define CONFIG_SYS_ICACHE_OFF 24 #define CONFIG_SYS_DCACHE_OFF 25 #if !defined(CONFIG_SPL_BUILD) 26 #define CONFIG_SKIP_LOWLEVEL_INIT 27 #endif 28 #define CONFIG_BOARD_EARLY_INIT_R 29 30 /* generate LPC32XX-specific SPL image */ 31 #define CONFIG_LPC32XX_SPL 32 33 /* 34 * Memory configurations 35 */ 36 #define CONFIG_NR_DRAM_BANKS 1 37 #define CONFIG_SYS_MALLOC_LEN SZ_1M 38 #define CONFIG_SYS_SDRAM_BASE EMC_DYCS0_BASE 39 #define CONFIG_SYS_SDRAM_SIZE SZ_128M 40 #define CONFIG_SYS_TEXT_BASE 0x80100000 41 #define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE + SZ_32K) 42 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - SZ_1M) 43 44 #define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_32K) 45 46 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + SZ_512K \ 47 - GENERATED_GBL_DATA_SIZE) 48 49 /* 50 * Serial Driver 51 */ 52 #define CONFIG_SYS_LPC32XX_UART 5 /* UART5 - NS16550 */ 53 54 /* 55 * Ethernet Driver 56 */ 57 58 #define CONFIG_PHY_SMSC 59 #define CONFIG_LPC32XX_ETH 60 #define CONFIG_PHY_ADDR 0 61 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN 62 /* FIXME: remove "Waiting for PHY auto negotiation to complete..." message */ 63 64 /* 65 * I2C driver 66 */ 67 68 #define CONFIG_SYS_I2C_LPC32XX 69 #define CONFIG_SYS_I2C 70 #define CONFIG_SYS_I2C_SPEED 350000 71 72 /* 73 * I2C EEPROM 74 */ 75 76 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x56 77 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 78 79 /* 80 * I2C RTC 81 */ 82 83 #define CONFIG_RTC_DS1374 84 85 /* 86 * U-Boot General Configurations 87 */ 88 #define CONFIG_SYS_LONGHELP 89 #define CONFIG_SYS_CBSIZE 1024 90 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 91 92 #define CONFIG_AUTO_COMPLETE 93 #define CONFIG_CMDLINE_EDITING 94 95 /* 96 * NAND chip timings for FIXME: which one? 97 */ 98 99 #define CONFIG_LPC32XX_NAND_MLC_TCEA_DELAY 333333333 100 #define CONFIG_LPC32XX_NAND_MLC_BUSY_DELAY 10000000 101 #define CONFIG_LPC32XX_NAND_MLC_NAND_TA 18181818 102 #define CONFIG_LPC32XX_NAND_MLC_RD_HIGH 31250000 103 #define CONFIG_LPC32XX_NAND_MLC_RD_LOW 45454545 104 #define CONFIG_LPC32XX_NAND_MLC_WR_HIGH 40000000 105 #define CONFIG_LPC32XX_NAND_MLC_WR_LOW 83333333 106 107 /* 108 * NAND 109 */ 110 111 /* driver configuration */ 112 #define CONFIG_SYS_NAND_SELF_INIT 113 #define CONFIG_SYS_MAX_NAND_DEVICE 1 114 #define CONFIG_SYS_MAX_NAND_CHIPS 1 115 #define CONFIG_SYS_NAND_BASE MLC_NAND_BASE 116 #define CONFIG_NAND_LPC32XX_MLC 117 118 /* 119 * GPIO 120 */ 121 122 #define CONFIG_LPC32XX_GPIO 123 124 /* 125 * SSP/SPI/DISPLAY 126 */ 127 128 #define CONFIG_LPC32XX_SSP 129 #define CONFIG_LPC32XX_SSP_TIMEOUT 100000 130 /* 131 * Environment 132 */ 133 134 #define CONFIG_ENV_SIZE 0x00020000 135 #define CONFIG_ENV_OFFSET 0x00100000 136 #define CONFIG_ENV_OFFSET_REDUND 0x00120000 137 #define CONFIG_ENV_ADDR 0x80000100 138 139 /* 140 * Boot Linux 141 */ 142 #define CONFIG_CMDLINE_TAG 143 #define CONFIG_SETUP_MEMORY_TAGS 144 #define CONFIG_INITRD_TAG 145 146 #define CONFIG_BOOTFILE "uImage" 147 #define CONFIG_LOADADDR 0x80008000 148 149 /* 150 * SPL 151 */ 152 153 /* SPL will be executed at offset 0 */ 154 #define CONFIG_SPL_TEXT_BASE 0x00000000 155 /* SPL will use SRAM as stack */ 156 #define CONFIG_SPL_STACK 0x0000FFF8 157 /* Use the framework and generic lib */ 158 #define CONFIG_SPL_FRAMEWORK 159 /* SPL will use serial */ 160 /* SPL will load U-Boot from NAND offset 0x40000 */ 161 #define CONFIG_SPL_NAND_DRIVERS 162 #define CONFIG_SPL_NAND_BASE 163 #define CONFIG_SPL_NAND_BOOT 164 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x00040000 165 #define CONFIG_SPL_PAD_TO 0x20000 166 /* U-Boot will be 0x40000 bytes, loaded and run at CONFIG_SYS_TEXT_BASE */ 167 #define CONFIG_SYS_MONITOR_LEN 0x40000 /* actually, MAX size */ 168 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE 169 #define CONFIG_SYS_NAND_U_BOOT_DST CONFIG_SYS_TEXT_BASE 170 171 /* 172 * Include SoC specific configuration 173 */ 174 #include <asm/arch/config.h> 175 176 #endif /* __CONFIG_WORK_92105_H__*/ 177