1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Configuation settings for the WB45N CPU Module. 4 */ 5 6 #ifndef __CONFIG_H__ 7 #define __CONFIG_H__ 8 9 #include <asm/hardware.h> 10 11 /* ARM asynchronous clock */ 12 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 13 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ 14 15 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 16 #define CONFIG_SETUP_MEMORY_TAGS 17 #define CONFIG_INITRD_TAG 18 #define CONFIG_SKIP_LOWLEVEL_INIT 19 20 /* general purpose I/O */ 21 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 22 #define CONFIG_AT91_GPIO 23 24 /* serial console */ 25 #define CONFIG_ATMEL_USART 26 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 27 #define CONFIG_USART_ID ATMEL_ID_SYS 28 29 /* 30 * BOOTP options 31 */ 32 #define CONFIG_BOOTP_BOOTFILESIZE 33 34 /* SDRAM */ 35 #define CONFIG_SYS_SDRAM_BASE 0x20000000 36 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 MB */ 37 38 #define CONFIG_SYS_INIT_SP_ADDR \ 39 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 40 41 /* NAND flash */ 42 #define CONFIG_SYS_MAX_NAND_DEVICE 1 43 #define CONFIG_SYS_NAND_BASE 0x40000000 44 /* our ALE is AD21 */ 45 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 46 /* our CLE is AD22 */ 47 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 48 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 49 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 50 51 /* PMECC & PMERRLOC */ 52 #define CONFIG_ATMEL_NAND_HWECC 1 53 #define CONFIG_ATMEL_NAND_HW_PMECC 1 54 #define CONFIG_PMECC_CAP 4 55 #define CONFIG_PMECC_SECTOR_SIZE 512 56 57 #define CONFIG_RBTREE 58 #define CONFIG_LZO 59 60 /* Ethernet */ 61 #define CONFIG_MACB 62 #define CONFIG_RMII 63 #define CONFIG_NET_RETRY_COUNT 20 64 #define CONFIG_MACB_SEARCH_PHY 65 #define CONFIG_ETHADDR C0:EE:40:00:00:00 66 #define CONFIG_ENV_OVERWRITE 1 67 68 /* System */ 69 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 70 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 71 #define CONFIG_SYS_MEMTEST_END 0x23e00000 72 73 #ifdef CONFIG_SYS_USE_NANDFLASH 74 /* bootstrap + u-boot + env + linux in nandflash */ 75 #define CONFIG_ENV_OFFSET 0xa0000 76 #define CONFIG_ENV_OFFSET_REDUND 0xc0000 77 #define CONFIG_ENV_SIZE 0x20000 /* 1 block = 128 kB */ 78 79 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xe0000 0x280000; " \ 80 "run _mtd; bootm" 81 82 #define MTDIDS_DEFAULT "nand0=atmel_nand" 83 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:" \ 84 "128K(at91bs)," \ 85 "512K(u-boot)," \ 86 "128K(u-boot-env)," \ 87 "128K(redund-env)," \ 88 "2560K(kernel-a)," \ 89 "2560K(kernel-b)," \ 90 "38912K(rootfs-a)," \ 91 "38912K(rootfs-b)," \ 92 "46208K(user)," \ 93 "512K(logs)" 94 95 #else 96 #error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH' 97 #endif 98 99 #define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \ 100 "rw noinitrd mem=64M " \ 101 "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6" 102 103 #define CONFIG_EXTRA_ENV_SETTINGS \ 104 "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \ 105 "autoload=no\0" \ 106 "autostart=no\0" \ 107 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \ 108 "\0" 109 110 #define CONFIG_SYS_CBSIZE 256 111 #define CONFIG_SYS_MAXARGS 16 112 113 /* 114 * Size of malloc() pool 115 */ 116 #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) 117 118 /* SPL */ 119 #define CONFIG_SPL_TEXT_BASE 0x300000 120 #define CONFIG_SPL_MAX_SIZE 0x6000 121 #define CONFIG_SPL_STACK 0x308000 122 123 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 124 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 125 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 126 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 127 128 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 129 130 #define CONFIG_SYS_MASTER_CLOCK 132096000 131 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 132 #define CONFIG_SYS_MCKR 0x1301 133 #define CONFIG_SYS_MCKR_CSS 0x1302 134 135 #define CONFIG_SPL_NAND_DRIVERS 136 #define CONFIG_SPL_NAND_BASE 137 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 138 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 139 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 140 #define CONFIG_SYS_NAND_PAGE_COUNT 64 141 #define CONFIG_SYS_NAND_OOBSIZE 64 142 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 143 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 144 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER 145 146 #endif /* __CONFIG_H__ */ 147