1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Configuation settings for the WB45N CPU Module. 4 */ 5 6 #ifndef __CONFIG_H__ 7 #define __CONFIG_H__ 8 9 #include <asm/hardware.h> 10 11 /* ARM asynchronous clock */ 12 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768 13 #define CONFIG_SYS_AT91_MAIN_CLOCK 12000000 /* 12 MHz crystal */ 14 15 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 16 #define CONFIG_SETUP_MEMORY_TAGS 17 #define CONFIG_INITRD_TAG 18 #define CONFIG_SKIP_LOWLEVEL_INIT 19 20 /* general purpose I/O */ 21 #define CONFIG_ATMEL_LEGACY /* required until (g)pio is fixed */ 22 #define CONFIG_AT91_GPIO 23 24 /* serial console */ 25 #define CONFIG_ATMEL_USART 26 #define CONFIG_USART_BASE ATMEL_BASE_DBGU 27 #define CONFIG_USART_ID ATMEL_ID_SYS 28 29 /* 30 * BOOTP options 31 */ 32 #define CONFIG_BOOTP_BOOTFILESIZE 33 34 /* SDRAM */ 35 #define CONFIG_NR_DRAM_BANKS 1 36 #define CONFIG_SYS_SDRAM_BASE 0x20000000 37 #define CONFIG_SYS_SDRAM_SIZE 0x04000000 /* 64 MB */ 38 39 #define CONFIG_SYS_INIT_SP_ADDR \ 40 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 41 42 /* NAND flash */ 43 #define CONFIG_SYS_MAX_NAND_DEVICE 1 44 #define CONFIG_SYS_NAND_BASE 0x40000000 45 /* our ALE is AD21 */ 46 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) 47 /* our CLE is AD22 */ 48 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) 49 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PD4 50 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PD5 51 52 /* PMECC & PMERRLOC */ 53 #define CONFIG_ATMEL_NAND_HWECC 1 54 #define CONFIG_ATMEL_NAND_HW_PMECC 1 55 #define CONFIG_PMECC_CAP 4 56 #define CONFIG_PMECC_SECTOR_SIZE 512 57 58 #define CONFIG_CMD_MTDPARTS 59 #define CONFIG_RBTREE 60 #define CONFIG_LZO 61 62 /* Ethernet */ 63 #define CONFIG_MACB 64 #define CONFIG_RMII 65 #define CONFIG_NET_RETRY_COUNT 20 66 #define CONFIG_MACB_SEARCH_PHY 67 #define CONFIG_ETHADDR C0:EE:40:00:00:00 68 #define CONFIG_ENV_OVERWRITE 1 69 70 /* System */ 71 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 72 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 73 #define CONFIG_SYS_MEMTEST_END 0x23e00000 74 75 #ifdef CONFIG_SYS_USE_NANDFLASH 76 /* bootstrap + u-boot + env + linux in nandflash */ 77 #define CONFIG_ENV_OFFSET 0xa0000 78 #define CONFIG_ENV_OFFSET_REDUND 0xc0000 79 #define CONFIG_ENV_SIZE 0x20000 /* 1 block = 128 kB */ 80 81 #define CONFIG_BOOTCOMMAND "nand read 0x22000000 0xe0000 0x280000; " \ 82 "run _mtd; bootm" 83 84 #define MTDIDS_DEFAULT "nand0=atmel_nand" 85 #define MTDPARTS_DEFAULT "mtdparts=atmel_nand:" \ 86 "128K(at91bs)," \ 87 "512K(u-boot)," \ 88 "128K(u-boot-env)," \ 89 "128K(redund-env)," \ 90 "2560K(kernel-a)," \ 91 "2560K(kernel-b)," \ 92 "38912K(rootfs-a)," \ 93 "38912K(rootfs-b)," \ 94 "46208K(user)," \ 95 "512K(logs)" 96 97 #else 98 #error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH' 99 #endif 100 101 #define CONFIG_BOOTARGS "console=ttyS0,115200 earlyprintk " \ 102 "rw noinitrd mem=64M " \ 103 "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6" 104 105 #define CONFIG_EXTRA_ENV_SETTINGS \ 106 "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \ 107 "autoload=no\0" \ 108 "autostart=no\0" \ 109 "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \ 110 "\0" 111 112 #define CONFIG_SYS_CBSIZE 256 113 #define CONFIG_SYS_MAXARGS 16 114 115 /* 116 * Size of malloc() pool 117 */ 118 #define CONFIG_SYS_MALLOC_LEN (512 * 1024 + 0x1000) 119 120 /* SPL */ 121 #define CONFIG_SPL_TEXT_BASE 0x300000 122 #define CONFIG_SPL_MAX_SIZE 0x6000 123 #define CONFIG_SPL_STACK 0x308000 124 125 #define CONFIG_SPL_BSS_START_ADDR 0x20000000 126 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 127 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000 128 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x80000 129 130 #define CONFIG_SYS_MONITOR_LEN (512 << 10) 131 132 #define CONFIG_SYS_MASTER_CLOCK 132096000 133 #define CONFIG_SYS_AT91_PLLA 0x20c73f03 134 #define CONFIG_SYS_MCKR 0x1301 135 #define CONFIG_SYS_MCKR_CSS 0x1302 136 137 #define CONFIG_SPL_NAND_DRIVERS 138 #define CONFIG_SPL_NAND_BASE 139 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 140 #define CONFIG_SYS_NAND_5_ADDR_CYCLE 141 #define CONFIG_SYS_NAND_PAGE_SIZE 0x800 142 #define CONFIG_SYS_NAND_PAGE_COUNT 64 143 #define CONFIG_SYS_NAND_OOBSIZE 64 144 #define CONFIG_SYS_NAND_BLOCK_SIZE 0x20000 145 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0x0 146 #define CONFIG_SPL_GENERATE_ATMEL_PMECC_HEADER 147 148 #endif /* __CONFIG_H__ */ 149