xref: /openbmc/u-boot/include/configs/wb45n.h (revision 1a68faac)
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Configuation settings for the WB45N CPU Module.
4  */
5 
6 #ifndef __CONFIG_H__
7 #define __CONFIG_H__
8 
9 #include <asm/hardware.h>
10 
11 /* ARM asynchronous clock */
12 #define CONFIG_SYS_AT91_SLOW_CLOCK  32768
13 #define CONFIG_SYS_AT91_MAIN_CLOCK  12000000	/* 12 MHz crystal */
14 
15 #define CONFIG_CMDLINE_TAG	/* enable passing of ATAGs */
16 #define CONFIG_SETUP_MEMORY_TAGS
17 #define CONFIG_INITRD_TAG
18 #define CONFIG_SKIP_LOWLEVEL_INIT
19 
20 /* general purpose I/O */
21 #define CONFIG_ATMEL_LEGACY	/* required until (g)pio is fixed */
22 #define CONFIG_AT91_GPIO
23 
24 /* serial console */
25 #define CONFIG_ATMEL_USART
26 #define CONFIG_USART_BASE   ATMEL_BASE_DBGU
27 #define CONFIG_USART_ID     ATMEL_ID_SYS
28 
29 /*
30  * BOOTP options
31  */
32 #define CONFIG_BOOTP_BOOTFILESIZE
33 
34 /* SDRAM */
35 #define CONFIG_SYS_SDRAM_BASE       0x20000000
36 #define CONFIG_SYS_SDRAM_SIZE       0x04000000	/* 64 MB */
37 
38 #define CONFIG_SYS_INIT_SP_ADDR \
39     (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE)
40 
41 /* NAND flash */
42 #define CONFIG_SYS_MAX_NAND_DEVICE  1
43 #define CONFIG_SYS_NAND_BASE        0x40000000
44 /* our ALE is AD21 */
45 #define CONFIG_SYS_NAND_MASK_ALE    (1 << 21)
46 /* our CLE is AD22 */
47 #define CONFIG_SYS_NAND_MASK_CLE    (1 << 22)
48 #define CONFIG_SYS_NAND_ENABLE_PIN  AT91_PIN_PD4
49 #define CONFIG_SYS_NAND_READY_PIN   AT91_PIN_PD5
50 
51 #define CONFIG_RBTREE
52 #define CONFIG_LZO
53 
54 /* Ethernet */
55 #define CONFIG_MACB
56 #define CONFIG_RMII
57 #define CONFIG_NET_RETRY_COUNT      20
58 #define CONFIG_MACB_SEARCH_PHY
59 #define CONFIG_ETHADDR              C0:EE:40:00:00:00
60 #define CONFIG_ENV_OVERWRITE        1
61 
62 /* System */
63 #define CONFIG_SYS_LOAD_ADDR        0x22000000	/* load address */
64 #define CONFIG_SYS_MEMTEST_START    CONFIG_SYS_SDRAM_BASE
65 #define CONFIG_SYS_MEMTEST_END      0x23e00000
66 
67 #ifdef CONFIG_SYS_USE_NANDFLASH
68 /* bootstrap + u-boot + env + linux in nandflash */
69 #define CONFIG_ENV_OFFSET           0xa0000
70 #define CONFIG_ENV_OFFSET_REDUND    0xc0000
71 #define CONFIG_ENV_SIZE             0x20000	/* 1 block = 128 kB */
72 
73 #define CONFIG_BOOTCOMMAND  "nand read 0x22000000 0xe0000 0x280000; " \
74     "run _mtd; bootm"
75 
76 #define MTDIDS_DEFAULT      "nand0=atmel_nand"
77 #define MTDPARTS_DEFAULT    "mtdparts=atmel_nand:" \
78                             "128K(at91bs)," \
79                             "512K(u-boot)," \
80                             "128K(u-boot-env)," \
81                             "128K(redund-env)," \
82                             "2560K(kernel-a)," \
83                             "2560K(kernel-b)," \
84                             "38912K(rootfs-a)," \
85                             "38912K(rootfs-b)," \
86                             "46208K(user)," \
87                             "512K(logs)"
88 
89 #else
90 #error No boot method selected, please select 'CONFIG_SYS_USE_NANDFLASH'
91 #endif
92 
93 #define CONFIG_BOOTARGS     "console=ttyS0,115200 earlyprintk " \
94                             "rw noinitrd mem=64M "              \
95                             "rootfstype=ubifs root=ubi0:rootfs ubi.mtd=6"
96 
97 #define CONFIG_EXTRA_ENV_SETTINGS       \
98     "_mtd=mtdparts default; setenv bootargs ${bootargs} ${mtdparts}\0" \
99     "autoload=no\0" \
100     "autostart=no\0" \
101     "ethaddr=" __stringify(CONFIG_ETHADDR) "\0" \
102     "\0"
103 
104 #define CONFIG_SYS_CBSIZE   256
105 #define CONFIG_SYS_MAXARGS  16
106 
107 /*
108  * Size of malloc() pool
109  */
110 #define CONFIG_SYS_MALLOC_LEN       (512 * 1024 + 0x1000)
111 
112 /* SPL */
113 #define CONFIG_SPL_TEXT_BASE        0x300000
114 #define CONFIG_SPL_MAX_SIZE         0x6000
115 #define CONFIG_SPL_STACK            0x308000
116 
117 #define CONFIG_SPL_BSS_START_ADDR   0x20000000
118 #define CONFIG_SPL_BSS_MAX_SIZE     0x80000
119 #define CONFIG_SYS_SPL_MALLOC_START 0x20080000
120 #define CONFIG_SYS_SPL_MALLOC_SIZE  0x80000
121 
122 #define CONFIG_SYS_MONITOR_LEN      (512 << 10)
123 
124 #define CONFIG_SYS_MASTER_CLOCK     132096000
125 #define CONFIG_SYS_AT91_PLLA        0x20c73f03
126 #define CONFIG_SYS_MCKR             0x1301
127 #define CONFIG_SYS_MCKR_CSS         0x1302
128 
129 #define CONFIG_SPL_NAND_DRIVERS
130 #define CONFIG_SPL_NAND_BASE
131 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000
132 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
133 #define CONFIG_SYS_NAND_PAGE_SIZE   0x800
134 #define CONFIG_SYS_NAND_PAGE_COUNT  64
135 #define CONFIG_SYS_NAND_OOBSIZE     64
136 #define CONFIG_SYS_NAND_BLOCK_SIZE  0x20000
137 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0x0
138 
139 #endif				/* __CONFIG_H__ */
140