1 /* 2 * Copyright (C) 2014 O.S. Systems Software LTDA. 3 * Copyright (C) 2014 Kynetics LLC. 4 * Copyright (C) 2014 Revolution Robotics, Inc. 5 * 6 * Author: Otavio Salvador <otavio@ossystems.com.br> 7 * 8 * Configuration settings for the WaRP Board 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include "mx6_common.h" 17 18 /* Size of malloc() pool */ 19 #define CONFIG_SYS_MALLOC_LEN (35 * SZ_1M) /* Increase due to DFU */ 20 21 #define CONFIG_BOARD_EARLY_INIT_F 22 #define CONFIG_BOARD_LATE_INIT 23 24 #define CONFIG_MXC_UART 25 #define CONFIG_MXC_UART_BASE UART1_IPS_BASE_ADDR 26 27 /* MMC Configs */ 28 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC2_BASE_ADDR 29 #define CONFIG_SYS_FSL_ESDHC_FORCE_VSELECT 30 #define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE 31 #define CONFIG_SUPPORT_EMMC_BOOT 32 33 /* Command definition */ 34 #undef CONFIG_CMD_NFS 35 36 /* Watchdog */ 37 #define CONFIG_HW_WATCHDOG 38 #define CONFIG_IMX_WATCHDOG 39 #define CONFIG_WATCHDOG_TIMEOUT_MSECS 30000 /* 30s */ 40 41 #define CONFIG_SYS_MEMTEST_START 0x80000000 42 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + SZ_256M) 43 44 #define CONFIG_STACKSIZE SZ_128K 45 46 /* Physical Memory Map */ 47 #define CONFIG_NR_DRAM_BANKS 1 48 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 49 #define PHYS_SDRAM_SIZE SZ_512M 50 51 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 52 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 53 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 54 55 #define CONFIG_SYS_INIT_SP_OFFSET \ 56 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 57 #define CONFIG_SYS_INIT_SP_ADDR \ 58 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 59 60 #define CONFIG_ENV_OFFSET (6 * SZ_64K) 61 #define CONFIG_ENV_SIZE SZ_8K 62 #define CONFIG_ENV_IS_IN_MMC 63 #define CONFIG_SYS_MMC_ENV_DEV 0 64 65 /* VDD voltage 1.65 - 1.95 */ 66 #define CONFIG_SYS_SD_VOLTAGE 0x00000080 67 68 /* USB Configs */ 69 #define CONFIG_CMD_USB 70 #ifdef CONFIG_CMD_USB 71 #define CONFIG_USB_EHCI 72 #define CONFIG_USB_EHCI_MX6 73 #define CONFIG_USB_STORAGE 74 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 75 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 76 #define CONFIG_MXC_USB_FLAGS 0 77 #define CONFIG_USB_MAX_CONTROLLER_COUNT 1 /* Only OTG2 port enabled */ 78 #endif 79 80 #define CONFIG_CI_UDC 81 #define CONFIG_USBD_HS 82 #define CONFIG_USB_GADGET_DUALSPEED 83 84 #define CONFIG_USB_GADGET 85 #define CONFIG_CMD_USB_MASS_STORAGE 86 #define CONFIG_USB_GADGET_MASS_STORAGE 87 #define CONFIG_USBDOWNLOAD_GADGET 88 #define CONFIG_USB_GADGET_VBUS_DRAW 2 89 90 #define CONFIG_G_DNL_VENDOR_NUM 0x0525 91 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 92 #define CONFIG_G_DNL_MANUFACTURER "FSL" 93 94 #define CONFIG_CMD_DFU 95 #define CONFIG_DFU_FUNCTION 96 #define CONFIG_DFU_MMC 97 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_16M 98 #define DFU_DEFAULT_POLL_TIMEOUT 300 99 100 /* Fuses */ 101 #define CONFIG_CMD_FUSE 102 #define CONFIG_MXC_OCOTP 103 104 #define CONFIG_EXTRA_ENV_SETTINGS \ 105 "script=boot.scr\0" \ 106 "image=zImage\0" \ 107 "console=ttymxc0\0" \ 108 "fdt_high=0xffffffff\0" \ 109 "initrd_high=0xffffffff\0" \ 110 "fdt_file=imx6sl-warp.dtb\0" \ 111 "fdt_addr=0x88000000\0" \ 112 "initrd_addr=0x83800000\0" \ 113 "boot_fdt=try\0" \ 114 "ip_dyn=yes\0" \ 115 "mmcdev=0\0" \ 116 "mmcpart=1\0" \ 117 "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ 118 "dfu_alt_info=boot raw 0x2 0x400 mmcpart 1\0" \ 119 "mmcargs=setenv bootargs console=${console},${baudrate} " \ 120 "root=${mmcroot}\0" \ 121 "loadbootscript=" \ 122 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \ 123 "bootscript=echo Running bootscript from mmc ...; " \ 124 "source\0" \ 125 "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \ 126 "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \ 127 "mmcboot=echo Booting from mmc ...; " \ 128 "run mmcargs; " \ 129 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 130 "if run loadfdt; then " \ 131 "bootz ${loadaddr} - ${fdt_addr}; " \ 132 "else " \ 133 "if test ${boot_fdt} = try; then " \ 134 "bootz; " \ 135 "else " \ 136 "echo WARN: Cannot load the DT; " \ 137 "fi; " \ 138 "fi; " \ 139 "else " \ 140 "bootz; " \ 141 "fi;\0" \ 142 "netargs=setenv bootargs console=${console},${baudrate} " \ 143 "root=/dev/nfs " \ 144 "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \ 145 "netboot=echo Booting from net ...; " \ 146 "run netargs; " \ 147 "if test ${ip_dyn} = yes; then " \ 148 "setenv get_cmd dhcp; " \ 149 "else " \ 150 "setenv get_cmd tftp; " \ 151 "fi; " \ 152 "${get_cmd} ${image}; " \ 153 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \ 154 "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \ 155 "bootz ${loadaddr} - ${fdt_addr}; " \ 156 "else " \ 157 "if test ${boot_fdt} = try; then " \ 158 "bootz; " \ 159 "else " \ 160 "echo WARN: Cannot load the DT; " \ 161 "fi; " \ 162 "fi; " \ 163 "else " \ 164 "bootz; " \ 165 "fi;\0" 166 167 #define CONFIG_BOOTCOMMAND \ 168 "mmc dev ${mmcdev};" \ 169 "mmc dev ${mmcdev}; if mmc rescan; then " \ 170 "if run loadbootscript; then " \ 171 "run bootscript; " \ 172 "else " \ 173 "if run loadimage; then " \ 174 "run mmcboot; " \ 175 "else run netboot; " \ 176 "fi; " \ 177 "fi; " \ 178 "else run netboot; fi" 179 180 #endif /* __CONFIG_H */ 181