xref: /openbmc/u-boot/include/configs/wandboard.h (revision 699c4e59)
1 /*
2  * Copyright (C) 2013 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Wandboard.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include <config_distro_defaults.h>
13 #include "mx6_common.h"
14 
15 #define CONFIG_SPL_LIBCOMMON_SUPPORT
16 #define CONFIG_SPL_MMC_SUPPORT
17 #include "imx6_spl.h"
18 
19 #define MACH_TYPE_WANDBOARD		4412
20 #define CONFIG_MACH_TYPE		MACH_TYPE_WANDBOARD
21 
22 /* Size of malloc() pool */
23 #define CONFIG_SYS_MALLOC_LEN		(10 * SZ_1M)
24 
25 #define CONFIG_BOARD_EARLY_INIT_F
26 #define CONFIG_BOARD_LATE_INIT
27 
28 #define CONFIG_MXC_UART
29 #define CONFIG_MXC_UART_BASE		UART1_BASE
30 
31 /* SATA Configs */
32 
33 #define CONFIG_CMD_SATA
34 #ifdef CONFIG_CMD_SATA
35 #define CONFIG_DWC_AHSATA
36 #define CONFIG_SYS_SATA_MAX_DEVICE	1
37 #define CONFIG_DWC_AHSATA_PORT_ID	0
38 #define CONFIG_DWC_AHSATA_BASE_ADDR	SATA_ARB_BASE_ADDR
39 #define CONFIG_LBA48
40 #define CONFIG_LIBATA
41 #endif
42 
43 /* Command definition */
44 #define CONFIG_CMD_BMODE
45 
46 #define CONFIG_SYS_MEMTEST_START	0x10000000
47 #define CONFIG_SYS_MEMTEST_END		(CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
48 
49 /* I2C Configs */
50 #define CONFIG_SYS_I2C
51 #define CONFIG_SYS_I2C_MXC
52 #define CONFIG_SYS_I2C_MXC_I2C1		/* enable I2C bus 1 */
53 #define CONFIG_SYS_I2C_MXC_I2C2		/* enable I2C bus 2 */
54 #define CONFIG_SYS_I2C_MXC_I2C3		/* enable I2C bus 3 */
55 #define CONFIG_SYS_I2C_SPEED		100000
56 
57 /* MMC Configuration */
58 #define CONFIG_SYS_FSL_USDHC_NUM	2
59 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
60 
61 /* USB Configs */
62 #define CONFIG_USB_EHCI
63 #define CONFIG_USB_EHCI_MX6
64 #define CONFIG_USB_STORAGE
65 #define CONFIG_USB_MAX_CONTROLLER_COUNT	2
66 #define CONFIG_MXC_USB_PORTSC		(PORT_PTS_UTMI | PORT_PTS_PTW)
67 #define CONFIG_MXC_USB_FLAGS		0
68 
69 /* Ethernet Configuration */
70 #define CONFIG_FEC_MXC
71 #define CONFIG_MII
72 #define IMX_FEC_BASE			ENET_BASE_ADDR
73 #define CONFIG_FEC_XCV_TYPE		RGMII
74 #define CONFIG_ETHPRIME			"FEC"
75 #define CONFIG_FEC_MXC_PHYADDR		1
76 #define CONFIG_PHYLIB
77 #define CONFIG_PHY_ATHEROS
78 
79 /* Framebuffer */
80 #define CONFIG_VIDEO
81 #define CONFIG_VIDEO_IPUV3
82 #define CONFIG_CFB_CONSOLE
83 #define CONFIG_VGA_AS_SINGLE_DEVICE
84 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
85 #define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
86 #define CONFIG_VIDEO_BMP_RLE8
87 #define CONFIG_SPLASH_SCREEN
88 #define CONFIG_SPLASH_SCREEN_ALIGN
89 #define CONFIG_BMP_16BPP
90 #define CONFIG_VIDEO_LOGO
91 #define CONFIG_VIDEO_BMP_LOGO
92 #define CONFIG_IPUV3_CLK 260000000
93 #define CONFIG_CMD_HDMIDETECT
94 #define CONFIG_IMX_HDMI
95 #define CONFIG_IMX_VIDEO_SKIP
96 
97 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
98 #define CONFIG_EXTRA_ENV_SETTINGS \
99 	"console=ttymxc0,115200\0" \
100 	"splashpos=m,m\0" \
101 	"fdtfile=undefined\0" \
102 	"fdt_high=0xffffffff\0" \
103 	"initrd_high=0xffffffff\0" \
104 	"fdt_addr_r=0x18000000\0" \
105 	"fdt_addr=0x18000000\0" \
106 	"ip_dyn=yes\0" \
107 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
108 	"update_sd_firmware_filename=u-boot.imx\0" \
109 	"update_sd_firmware=" \
110 		"if test ${ip_dyn} = yes; then " \
111 			"setenv get_cmd dhcp; " \
112 		"else " \
113 			"setenv get_cmd tftp; " \
114 		"fi; " \
115 		"if mmc dev ${mmcdev}; then "	\
116 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
117 				"setexpr fw_sz ${filesize} / 0x200; " \
118 				"setexpr fw_sz ${fw_sz} + 1; "	\
119 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
120 			"fi; "	\
121 		"fi\0" \
122 	"videoargs=" \
123 		"setenv nextcon 0; " \
124 		"if hdmidet; then " \
125 			"setenv bootargs ${bootargs} " \
126 				"video=mxcfb${nextcon}:dev=hdmi,1280x720M@60," \
127 					"if=RGB24; " \
128 			"setenv fbmen fbmem=28M; " \
129 			"setexpr nextcon ${nextcon} + 1; " \
130 		"else " \
131 			"echo - no HDMI monitor;" \
132 		"fi; " \
133 		"i2c dev 1; " \
134 		"if i2c probe 0x10; then " \
135 			"setenv bootargs ${bootargs} " \
136 				"video=mxcfb${nextcon}:dev=lcd,800x480@60," \
137 					"if=RGB666,bpp=32; " \
138 			"if test 0 -eq ${nextcon}; then " \
139 				"setenv fbmem fbmem=10M; " \
140 			"else " \
141 				"setenv fbmem ${fbmem},10M; " \
142 			"fi; " \
143 			"setexpr nextcon ${nextcon} + 1; " \
144 		"else " \
145 			"echo '- no FWBADAPT-7WVGA-LCD-F07A-0102 display';" \
146 		"fi; " \
147 		"setenv bootargs ${bootargs} ${fbmem}\0" \
148 	"findfdt="\
149 		"if test $board_name = C1 && test $board_rev = MX6Q ; then " \
150 			"setenv fdtfile imx6q-wandboard.dtb; fi; " \
151 		"if test $board_name = C1 && test $board_rev = MX6DL ; then " \
152 			"setenv fdtfile imx6dl-wandboard.dtb; fi; " \
153 		"if test $board_name = B1 && test $board_rev = MX6Q ; then " \
154 			"setenv fdtfile imx6q-wandboard-revb1.dtb; fi; " \
155 		"if test $board_name = B1 && test $board_rev = MX6DL ; then " \
156 			"setenv fdtfile imx6dl-wandboard-revb1.dtb; fi; " \
157 		"if test $fdtfile = undefined; then " \
158 			"echo WARNING: Could not determine dtb to use; fi; \0" \
159 	"kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
160 	"pxefile_addr_r=" __stringify(CONFIG_LOADADDR) "\0" \
161 	"ramdisk_addr_r=0x13000000\0" \
162 	"ramdiskaddr=0x13000000\0" \
163 	"scriptaddr=" __stringify(CONFIG_LOADADDR) "\0" \
164 	BOOTENV
165 
166 #define BOOT_TARGET_DEVICES(func) \
167 	func(MMC, mmc, 0) \
168 	func(MMC, mmc, 1) \
169 	func(USB, usb, 0) \
170 	func(PXE, pxe, na) \
171 	func(DHCP, dhcp, na)
172 
173 #define CONFIG_BOOTCOMMAND \
174 	   "run findfdt; " \
175 	   "run distro_bootcmd"
176 
177 #include <config_distro_bootcmd.h>
178 
179 /* Physical Memory Map */
180 #define CONFIG_NR_DRAM_BANKS		1
181 #define PHYS_SDRAM			MMDC0_ARB_BASE_ADDR
182 
183 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
184 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
185 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
186 
187 #define CONFIG_SYS_INIT_SP_OFFSET \
188 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
189 #define CONFIG_SYS_INIT_SP_ADDR \
190 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
191 
192 /* Environment organization */
193 #define CONFIG_ENV_SIZE			(8 * 1024)
194 
195 #define CONFIG_ENV_IS_IN_MMC
196 #define CONFIG_ENV_OFFSET		(768 * 1024)
197 #define CONFIG_SYS_MMC_ENV_DEV		0
198 
199 #endif			       /* __CONFIG_H * */
200