1 /* 2 * Copyright (C) 2016 samtec automotive software & electronics gmbh 3 * 4 * Configuration settings for the Samtec VIN|ING 2000 board. 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 #ifndef __CONFIG_H 10 #define __CONFIG_H 11 12 #include "mx6_common.h" 13 14 #ifdef CONFIG_SPL 15 #include "imx6_spl.h" 16 #endif 17 18 /* Size of malloc() pool */ 19 #define CONFIG_SYS_MALLOC_LEN (3 * SZ_1M) 20 21 #define CONFIG_MXC_UART 22 #define CONFIG_MXC_UART_BASE UART1_BASE 23 24 #define BOOT_TARGET_DEVICES(func) \ 25 func(MMC, mmc, 0) \ 26 func(MMC, mmc, 1) \ 27 func(USB, usb, 0) \ 28 func(PXE, pxe, na) \ 29 func(DHCP, dhcp, na) 30 #include <config_distro_bootcmd.h> 31 32 /* Miscellaneous configurable options */ 33 #define CONFIG_SYS_MEMTEST_START 0x80000000 34 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START + 0x10000) 35 36 /* Physical Memory Map */ 37 #define CONFIG_NR_DRAM_BANKS 1 38 #define PHYS_SDRAM MMDC0_ARB_BASE_ADDR 39 40 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 41 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 42 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 43 44 #define CONFIG_SYS_INIT_SP_OFFSET \ 45 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 46 #define CONFIG_SYS_INIT_SP_ADDR \ 47 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 48 49 /* MMC Configuration */ 50 #define CONFIG_SYS_FSL_ESDHC_ADDR USDHC4_BASE_ADDR 51 52 /* I2C Configs */ 53 #define CONFIG_SYS_I2C 54 #define CONFIG_SYS_I2C_MXC 55 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 56 #define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */ 57 #define CONFIG_SYS_I2C_SPEED 100000 58 59 /* PMIC */ 60 #define CONFIG_POWER 61 #define CONFIG_POWER_I2C 62 #define CONFIG_POWER_PFUZE100 63 #define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08 64 65 /* Network */ 66 #define CONFIG_FEC_MXC 67 #define CONFIG_MII 68 69 #define IMX_FEC_BASE ENET_BASE_ADDR 70 #define CONFIG_FEC_MXC_PHYADDR 0x0 71 72 #define CONFIG_FEC_XCV_TYPE RMII 73 #define CONFIG_ETHPRIME "FEC" 74 75 #define CONFIG_PHY_ATHEROS 76 77 #ifdef CONFIG_CMD_USB 78 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET 79 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 80 #define CONFIG_MXC_USB_FLAGS 0 81 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 82 #endif 83 84 #ifdef CONFIG_CMD_PCI 85 #define CONFIG_PCI_SCAN_SHOW 86 #define CONFIG_PCIE_IMX 87 #define CONFIG_PCIE_IMX_PERST_GPIO IMX_GPIO_NR(4, 6) 88 #endif 89 90 #define CONFIG_IMX_THERMAL 91 92 #define CONFIG_PWM_IMX 93 #define CONFIG_IMX6_PWM_PER_CLK 66000000 94 95 #define CONFIG_ENV_OFFSET (8 * SZ_64K) 96 #define CONFIG_ENV_SIZE SZ_8K 97 #define CONFIG_ENV_OFFSET_REDUND (9 * SZ_64K) 98 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 99 100 #ifdef CONFIG_ENV_IS_IN_MMC 101 #define CONFIG_SUPPORT_EMMC_BOOT 102 #define CONFIG_SUPPORT_EMMC_RPMB 103 #define CONFIG_SYS_MMC_ENV_DEV 0 /* USDHC4 eMMC */ 104 /* 0=user, 1=boot0, 2=boot1, * 4..7=general0..3. */ 105 #define CONFIG_SYS_MMC_ENV_PART 1 /* boot0 */ 106 #endif 107 108 #endif /* __CONFIG_H */ 109