1 /* 2 * Configuration settings for the VInCo platform. 3 * 4 * Based on the settings for the SAMA5-EK board 5 * Copyright (C) 2014 Atmel 6 * Bo Shen <voice.shen@atmel.com> 7 * Copyright (C) 2015 Free Electrons 8 * Gregory CLEMENT gregory.clement@free-electrons.com 9 * 10 * SPDX-License-Identifier: GPL-2.0+ 11 */ 12 13 #ifndef __CONFIG_H 14 #define __CONFIG_H 15 16 #include "at91-sama5_common.h" 17 18 /* The value in the common file is too far away for the VInCo platform */ 19 #ifdef CONFIG_SYS_TEXT_BASE 20 #undef CONFIG_SYS_TEXT_BASE 21 #endif 22 #define CONFIG_SYS_TEXT_BASE 0x20f00000 23 24 /* serial console */ 25 #define CONFIG_ATMEL_USART 26 #define CONFIG_USART_BASE 0xfc00c000 27 #define CONFIG_USART_ID 30 28 29 /* Timer */ 30 #define CONFIG_SYS_TIMER_COUNTER 0xfc06863c 31 32 /* SDRAM */ 33 #define CONFIG_NR_DRAM_BANKS 1 34 #define CONFIG_SYS_SDRAM_BASE 0x20000000 35 #define CONFIG_SYS_SDRAM_SIZE 0x4000000 36 37 #define CONFIG_SYS_INIT_SP_ADDR \ 38 (CONFIG_SYS_SDRAM_BASE + 4 * 1024 - GENERATED_GBL_DATA_SIZE) 39 40 #define CONFIG_SYS_LOAD_ADDR 0x22000000 /* load address */ 41 42 /* SerialFlash */ 43 44 #ifdef CONFIG_CMD_SF 45 #define CONFIG_ATMEL_SPI 46 #define CONFIG_ATMEL_SPI0 47 #define CONFIG_SPI_FLASH_STMICRO 48 #define CONFIG_SF_DEFAULT_BUS 0 49 #define CONFIG_SF_DEFAULT_CS 0 50 #define CONFIG_SF_DEFAULT_SPEED 50000000 51 #define CONFIG_ENV_SPI_MAX_HZ 50000000 52 #define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0) 53 #define CONFIG_ENV_SPI_MODE (SPI_MODE_0) 54 #endif 55 56 /* MMC */ 57 58 #ifdef CONFIG_CMD_MMC 59 #define CONFIG_SUPPORT_EMMC_BOOT 60 #define CONFIG_GENERIC_ATMEL_MCI 61 #define ATMEL_BASE_MMCI 0xfc000000 62 #define CONFIG_SYS_MMC_CLK_OD 500000 63 64 /* For generating MMC partitions */ 65 #define CONFIG_RANDOM_UUID 66 67 #endif 68 69 /* USB device */ 70 #define CONFIG_USBNET_MANUFACTURER "L+G VInCo" 71 72 /* Ethernet Hardware */ 73 #define CONFIG_PHY_SMSC 74 #define CONFIG_MACB 75 #define CONFIG_RMII 76 #define CONFIG_NET_RETRY_COUNT 20 77 #define CONFIG_MACB_SEARCH_PHY 78 79 #ifdef CONFIG_SPI_BOOT 80 /* bootstrap + u-boot + env + linux in serial flash */ 81 #define CONFIG_ENV_SPI_BUS CONFIG_SF_DEFAULT_BUS 82 #define CONFIG_ENV_SPI_CS CONFIG_SF_DEFAULT_CS 83 /* Use our own mapping for the VInCo platform */ 84 #undef CONFIG_ENV_OFFSET 85 #undef CONFIG_ENV_SIZE 86 87 #define CONFIG_ENV_OFFSET 0x10000 88 #define CONFIG_ENV_SIZE 0x10000 89 90 /* Update the bootcommand according to our mapping for the VInCo platform */ 91 #undef CONFIG_BOOTCOMMAND 92 #define CONFIG_BOOTCOMMAND "mmc dev 0 0;" \ 93 "mmc read ${loadaddr} ${k_offset} ${k_blksize};" \ 94 "mmc read ${oftaddr} ${dtb_offset} ${dtb_blksize};" \ 95 "bootz ${loadaddr} - ${oftaddr}" 96 97 #define CONFIG_EXTRA_ENV_SETTINGS \ 98 "kernel_start=0x20000\0" \ 99 "kernel_size=0x800000\0" \ 100 "mmcblksize=0x200\0" \ 101 "oftaddr=0x21000000\0" \ 102 "loadaddr=0x22000000\0" \ 103 "update_uboot=tftp ${loadaddr} u-boot.bin;sf probe 0;" \ 104 "sf erase 0x20000 0x4B000; sf write ${loadaddr} 0x20000 0x4B000\0" \ 105 "create_partition=setexpr dtb_start ${kernel_start} + 0x400000;" \ 106 "setexpr rootfs_start ${kernel_start} + ${kernel_size};" \ 107 "setenv partitions 'name=kernel,size=${kernel_size}," \ 108 "start=${kernel_start};name=rootfs,size=-';" \ 109 "gpt write mmc 0 ${partitions} \0"\ 110 "f2blk_size=setexpr fileblksize ${filesize} / ${mmcblksize};" \ 111 "setexpr fileblksize ${fileblksize} + 1\0" \ 112 "store_kernel=tftp ${loadaddr} zImage; run f2blk_size;" \ 113 "setexpr k_blksize ${fileblksize};" \ 114 "setexpr k_offset ${kernel_start} / ${mmcblksize};" \ 115 "mmc write ${fileaddr} ${k_offset} ${fileblksize}\0" \ 116 "store_dtb=tftp ${loadaddr} at91-vinco.dtb; run f2blk_size;" \ 117 "setexpr dtb_blksize ${fileblksize};" \ 118 "setexpr dtb_offset ${dtb_start} / ${mmcblksize};" \ 119 "mmc write ${fileaddr} ${dtb_offset} ${fileblksize}\0" \ 120 "store_rootfs=tftp ${loadaddr} vinco-gateway-image-vinco.ext4;" \ 121 "setexpr rootfs_offset ${rootfs_start} / ${mmcblksize};" \ 122 "mmc write ${fileaddr} ${rootfs_offset} ${fileblksize}\0" \ 123 "bootdelay=0\0" 124 125 #endif 126 127 #endif 128