xref: /openbmc/u-boot/include/configs/vf610twr.h (revision b5493d17)
1 /*
2  * Copyright 2013 Freescale Semiconductor, Inc.
3  *
4  * Configuration settings for the Freescale Vybrid vf610twr board.
5  *
6  * SPDX-License-Identifier:	GPL-2.0+
7  */
8 
9 #ifndef __CONFIG_H
10 #define __CONFIG_H
11 
12 #include <asm/arch/imx-regs.h>
13 #include <config_cmd_default.h>
14 
15 #define CONFIG_VF610
16 
17 #define CONFIG_SYS_GENERIC_BOARD
18 #define CONFIG_DISPLAY_CPUINFO
19 #define CONFIG_DISPLAY_BOARDINFO
20 
21 #define CONFIG_MACH_TYPE		4146
22 
23 #define CONFIG_SKIP_LOWLEVEL_INIT
24 
25 /* Enable passing of ATAGs */
26 #define CONFIG_CMDLINE_TAG
27 
28 #define CONFIG_CMD_FUSE
29 #ifdef CONFIG_CMD_FUSE
30 #define CONFIG_MXC_OCOTP
31 #endif
32 
33 /* Size of malloc() pool */
34 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 2 * 1024 * 1024)
35 
36 #define CONFIG_BOARD_EARLY_INIT_F
37 
38 #define CONFIG_FSL_LPUART
39 #define LPUART_BASE			UART1_BASE
40 
41 /* Allow to overwrite serial and ethaddr */
42 #define CONFIG_ENV_OVERWRITE
43 #define CONFIG_SYS_UART_PORT		(1)
44 #define CONFIG_BAUDRATE			115200
45 
46 #undef CONFIG_CMD_IMLS
47 
48 /* NAND support */
49 #define CONFIG_CMD_NAND
50 #define CONFIG_CMD_NAND_TRIMFFS
51 
52 #ifdef CONFIG_CMD_NAND
53 #define CONFIG_NAND_VF610_NFC
54 #define CONFIG_SYS_NAND_SELF_INIT
55 #define CONFIG_USE_ARCH_MEMCPY
56 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
57 #define CONFIG_SYS_MAX_NAND_DEVICE	1
58 #define CONFIG_SYS_NAND_BASE		NFC_BASE_ADDR
59 
60 /* UBI */
61 #define CONFIG_CMD_UBI
62 #define CONFIG_CMD_UBIFS
63 #define CONFIG_CMD_MTDPARTS
64 #define CONFIG_RBTREE
65 #define CONFIG_LZO
66 #define CONFIG_MTD_DEVICE
67 #define CONFIG_MTD_PARTITIONS
68 
69 /* Dynamic MTD partition support */
70 #define CONFIG_CMD_MTDPARTS
71 #define CONFIG_MTD_PARTITIONS
72 #define CONFIG_MTD_DEVICE
73 #define MTDIDS_DEFAULT			"nand0=fsl_nfc"
74 #define MTDPARTS_DEFAULT		"mtdparts=fsl_nfc:"		\
75 					"128k(vf-bcb)ro,"		\
76 					"1408k(u-boot)ro,"		\
77 					"512k(u-boot-env),"		\
78 					"4m(kernel),"			\
79 					"512k(fdt),"		\
80 					"-(rootfs)"
81 #endif
82 
83 #define CONFIG_MMC
84 #define CONFIG_FSL_ESDHC
85 #define CONFIG_SYS_FSL_ESDHC_ADDR	0
86 #define CONFIG_SYS_FSL_ESDHC_NUM	1
87 
88 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
89 
90 #define CONFIG_CMD_MMC
91 #define CONFIG_GENERIC_MMC
92 #define CONFIG_CMD_FAT
93 #define CONFIG_DOS_PARTITION
94 
95 #define CONFIG_CMD_PING
96 #define CONFIG_CMD_DHCP
97 #define CONFIG_CMD_MII
98 #define CONFIG_CMD_NET
99 #define CONFIG_FEC_MXC
100 #define CONFIG_MII
101 #define IMX_FEC_BASE			ENET_BASE_ADDR
102 #define CONFIG_FEC_XCV_TYPE		RMII
103 #define CONFIG_FEC_MXC_PHYADDR          0
104 #define CONFIG_PHYLIB
105 #define CONFIG_PHY_MICREL
106 
107 /* QSPI Configs*/
108 #define CONFIG_FSL_QSPI
109 
110 #ifdef CONFIG_FSL_QSPI
111 #define CONFIG_CMD_SF
112 #define CONFIG_SPI_FLASH
113 #define CONFIG_SPI_FLASH_SPANSION
114 #define FSL_QSPI_FLASH_SIZE		(1 << 24)
115 #define FSL_QSPI_FLASH_NUM		2
116 #define CONFIG_SYS_FSL_QSPI_LE
117 #endif
118 
119 /* I2C Configs */
120 #define CONFIG_CMD_I2C
121 #define CONFIG_SYS_I2C
122 #define CONFIG_SYS_I2C_MXC
123 #define CONFIG_SYS_SPD_BUS_NUM		0
124 
125 #define CONFIG_BOOTDELAY		3
126 
127 #define CONFIG_LOADADDR			0x82000000
128 
129 /* We boot from the gfxRAM area of the OCRAM. */
130 #define CONFIG_SYS_TEXT_BASE		0x3f408000
131 #define CONFIG_BOARD_SIZE_LIMIT		524288
132 
133 #define CONFIG_EXTRA_ENV_SETTINGS \
134 	"script=boot.scr\0" \
135 	"image=zImage\0" \
136 	"console=ttyLP1\0" \
137 	"fdt_high=0xffffffff\0" \
138 	"initrd_high=0xffffffff\0" \
139 	"fdt_file=vf610-twr.dtb\0" \
140 	"fdt_addr=0x81000000\0" \
141 	"boot_fdt=try\0" \
142 	"ip_dyn=yes\0" \
143 	"mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
144 	"mmcpart=1\0" \
145 	"mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
146 	"update_sd_firmware_filename=u-boot.imx\0" \
147 	"update_sd_firmware=" \
148 		"if test ${ip_dyn} = yes; then " \
149 			"setenv get_cmd dhcp; " \
150 		"else " \
151 			"setenv get_cmd tftp; " \
152 		"fi; " \
153 		"if mmc dev ${mmcdev}; then "	\
154 			"if ${get_cmd} ${update_sd_firmware_filename}; then " \
155 				"setexpr fw_sz ${filesize} / 0x200; " \
156 				"setexpr fw_sz ${fw_sz} + 1; "	\
157 				"mmc write ${loadaddr} 0x2 ${fw_sz}; " \
158 			"fi; "	\
159 		"fi\0" \
160 	"mmcargs=setenv bootargs console=${console},${baudrate} " \
161 		"root=${mmcroot}\0" \
162 	"loadbootscript=" \
163 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
164 	"bootscript=echo Running bootscript from mmc ...; " \
165 		"source\0" \
166 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
167 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
168 	"mmcboot=echo Booting from mmc ...; " \
169 		"run mmcargs; " \
170 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
171 			"if run loadfdt; then " \
172 				"bootz ${loadaddr} - ${fdt_addr}; " \
173 			"else " \
174 				"if test ${boot_fdt} = try; then " \
175 					"bootz; " \
176 				"else " \
177 					"echo WARN: Cannot load the DT; " \
178 				"fi; " \
179 			"fi; " \
180 		"else " \
181 			"bootz; " \
182 		"fi;\0" \
183 	"netargs=setenv bootargs console=${console},${baudrate} " \
184 		"root=/dev/nfs " \
185 	"ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
186 		"netboot=echo Booting from net ...; " \
187 		"run netargs; " \
188 		"if test ${ip_dyn} = yes; then " \
189 			"setenv get_cmd dhcp; " \
190 		"else " \
191 			"setenv get_cmd tftp; " \
192 		"fi; " \
193 		"${get_cmd} ${image}; " \
194 		"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
195 			"if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
196 				"bootz ${loadaddr} - ${fdt_addr}; " \
197 			"else " \
198 				"if test ${boot_fdt} = try; then " \
199 					"bootz; " \
200 				"else " \
201 					"echo WARN: Cannot load the DT; " \
202 				"fi; " \
203 			"fi; " \
204 		"else " \
205 			"bootz; " \
206 		"fi;\0"
207 
208 #define CONFIG_BOOTCOMMAND \
209 	   "mmc dev ${mmcdev}; if mmc rescan; then " \
210 		   "if run loadbootscript; then " \
211 			   "run bootscript; " \
212 		   "else " \
213 			   "if run loadimage; then " \
214 				   "run mmcboot; " \
215 			   "else run netboot; " \
216 			   "fi; " \
217 		   "fi; " \
218 	   "else run netboot; fi"
219 
220 /* Miscellaneous configurable options */
221 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
222 #define CONFIG_SYS_HUSH_PARSER		/* use "hush" command parser */
223 #define CONFIG_SYS_PROMPT_HUSH_PS2	"> "
224 #undef CONFIG_AUTO_COMPLETE
225 #define CONFIG_SYS_CBSIZE		256	/* Console I/O Buffer Size */
226 #define CONFIG_SYS_PBSIZE		\
227 			(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
228 #define CONFIG_SYS_MAXARGS		16	/* max number of command args */
229 #define CONFIG_SYS_BARGSIZE		CONFIG_SYS_CBSIZE
230 
231 #define CONFIG_CMD_MEMTEST
232 #define CONFIG_SYS_MEMTEST_START	0x80010000
233 #define CONFIG_SYS_MEMTEST_END		0x87C00000
234 
235 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
236 
237 /*
238  * Stack sizes
239  * The stack sizes are set up in start.S using the settings below
240  */
241 #define CONFIG_STACKSIZE		(128 * 1024)	/* regular stack */
242 
243 /* Physical memory map */
244 #define CONFIG_NR_DRAM_BANKS		1
245 #define PHYS_SDRAM			(0x80000000)
246 #define PHYS_SDRAM_SIZE			(128 * 1024 * 1024)
247 
248 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM
249 #define CONFIG_SYS_INIT_RAM_ADDR	IRAM_BASE_ADDR
250 #define CONFIG_SYS_INIT_RAM_SIZE	IRAM_SIZE
251 
252 #define CONFIG_SYS_INIT_SP_OFFSET \
253 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
254 #define CONFIG_SYS_INIT_SP_ADDR \
255 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
256 
257 /* FLASH and environment organization */
258 #define CONFIG_SYS_NO_FLASH
259 
260 #ifdef CONFIG_ENV_IS_IN_MMC
261 #define CONFIG_ENV_SIZE			(8 * 1024)
262 
263 #define CONFIG_ENV_OFFSET		(12 * 64 * 1024)
264 #define CONFIG_SYS_MMC_ENV_DEV		0
265 #endif
266 
267 #ifdef CONFIG_ENV_IS_IN_NAND
268 #define CONFIG_ENV_SIZE			(64 * 2048)
269 #define CONFIG_ENV_SECT_SIZE		(64 * 2048)
270 #define CONFIG_ENV_RANGE		(512 * 1024)
271 #define CONFIG_ENV_OFFSET		0x180000
272 #endif
273 
274 #define CONFIG_OF_LIBFDT
275 #define CONFIG_CMD_BOOTZ
276 
277 #endif
278