1 /*
2  * (C) Copyright 2011 ARM Limited
3  * (C) Copyright 2010 Linaro
4  * Matt Waddel, <matt.waddel@linaro.org>
5  *
6  * Configuration for Versatile Express. Parts were derived from other ARM
7  *   configurations.
8  *
9  * SPDX-License-Identifier:	GPL-2.0+
10  */
11 
12 #ifndef __VEXPRESS_COMMON_H
13 #define __VEXPRESS_COMMON_H
14 
15 /*
16  * Definitions copied from linux kernel:
17  * arch/arm/mach-vexpress/include/mach/motherboard.h
18  */
19 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
20 /* CS register bases for the original memory map. */
21 #define V2M_PA_CS0		0x40000000
22 #define V2M_PA_CS1		0x44000000
23 #define V2M_PA_CS2		0x48000000
24 #define V2M_PA_CS3		0x4c000000
25 #define V2M_PA_CS7		0x10000000
26 
27 #define V2M_PERIPH_OFFSET(x)	(x << 12)
28 #define V2M_SYSREGS		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(0))
29 #define V2M_SYSCTL		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
30 #define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
31 
32 #define V2M_BASE		0x60000000
33 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
34 /* CS register bases for the extended memory map. */
35 #define V2M_PA_CS0		0x08000000
36 #define V2M_PA_CS1		0x0c000000
37 #define V2M_PA_CS2		0x14000000
38 #define V2M_PA_CS3		0x18000000
39 #define V2M_PA_CS7		0x1c000000
40 
41 #define V2M_PERIPH_OFFSET(x)	(x << 16)
42 #define V2M_SYSREGS		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(1))
43 #define V2M_SYSCTL		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(2))
44 #define V2M_SERIAL_BUS_PCI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(3))
45 
46 #define V2M_BASE		0x80000000
47 #endif
48 
49 /*
50  * Physical addresses, offset from V2M_PA_CS0-3
51  */
52 #define V2M_NOR0		(V2M_PA_CS0)
53 #define V2M_NOR1		(V2M_PA_CS1)
54 #define V2M_SRAM		(V2M_PA_CS2)
55 #define V2M_VIDEO_SRAM		(V2M_PA_CS3 + 0x00000000)
56 #define V2M_ISP1761		(V2M_PA_CS3 + 0x03000000)
57 
58 /* Common peripherals relative to CS7. */
59 #define V2M_AACI		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(4))
60 #define V2M_MMCI		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(5))
61 #define V2M_KMI0		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(6))
62 #define V2M_KMI1		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(7))
63 
64 #define V2M_UART0		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(9))
65 #define V2M_UART1		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(10))
66 #define V2M_UART2		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(11))
67 #define V2M_UART3		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(12))
68 
69 #define V2M_WDT			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(15))
70 
71 #define V2M_TIMER01		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(17))
72 #define V2M_TIMER23		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(18))
73 
74 #define V2M_SERIAL_BUS_DVI	(V2M_PA_CS7 + V2M_PERIPH_OFFSET(22))
75 #define V2M_RTC			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(23))
76 
77 #define V2M_CF			(V2M_PA_CS7 + V2M_PERIPH_OFFSET(26))
78 
79 #define V2M_CLCD		(V2M_PA_CS7 + V2M_PERIPH_OFFSET(31))
80 #define V2M_SIZE_CS7		V2M_PERIPH_OFFSET(32)
81 
82 /* System register offsets. */
83 #define V2M_SYS_CFGDATA		(V2M_SYSREGS + 0x0a0)
84 #define V2M_SYS_CFGCTRL		(V2M_SYSREGS + 0x0a4)
85 #define V2M_SYS_CFGSTAT		(V2M_SYSREGS + 0x0a8)
86 
87 /*
88  * Configuration
89  */
90 #define SYS_CFG_START		(1 << 31)
91 #define SYS_CFG_WRITE		(1 << 30)
92 #define SYS_CFG_OSC		(1 << 20)
93 #define SYS_CFG_VOLT		(2 << 20)
94 #define SYS_CFG_AMP		(3 << 20)
95 #define SYS_CFG_TEMP		(4 << 20)
96 #define SYS_CFG_RESET		(5 << 20)
97 #define SYS_CFG_SCC		(6 << 20)
98 #define SYS_CFG_MUXFPGA		(7 << 20)
99 #define SYS_CFG_SHUTDOWN	(8 << 20)
100 #define SYS_CFG_REBOOT		(9 << 20)
101 #define SYS_CFG_DVIMODE		(11 << 20)
102 #define SYS_CFG_POWER		(12 << 20)
103 #define SYS_CFG_SITE_MB		(0 << 16)
104 #define SYS_CFG_SITE_DB1	(1 << 16)
105 #define SYS_CFG_SITE_DB2	(2 << 16)
106 #define SYS_CFG_STACK(n)	((n) << 12)
107 
108 #define SYS_CFG_ERR		(1 << 1)
109 #define SYS_CFG_COMPLETE	(1 << 0)
110 
111 /* Board info register */
112 #define SYS_ID				V2M_SYSREGS
113 #define CONFIG_REVISION_TAG		1
114 
115 #define CONFIG_SYS_MEMTEST_START	V2M_BASE
116 #define CONFIG_SYS_MEMTEST_END		0x20000000
117 
118 #define CONFIG_CMDLINE_TAG		1	/* enable passing of ATAGs */
119 #define CONFIG_SETUP_MEMORY_TAGS	1
120 #define CONFIG_SYS_L2CACHE_OFF		1
121 #define CONFIG_INITRD_TAG		1
122 
123 /* Size of malloc() pool */
124 #define CONFIG_SYS_MALLOC_LEN		(CONFIG_ENV_SIZE + 128 * 1024)
125 
126 #define SCTL_BASE			V2M_SYSCTL
127 #define VEXPRESS_FLASHPROG_FLVPPEN	(1 << 0)
128 
129 #define CONFIG_SYS_TIMER_RATE		1000000
130 #define CONFIG_SYS_TIMER_COUNTER	(V2M_TIMER01 + 0x4)
131 #define CONFIG_SYS_TIMER_COUNTS_DOWN
132 
133 /* PL011 Serial Configuration */
134 #define CONFIG_PL011_CLOCK		24000000
135 #define CONFIG_PL01x_PORTS		{(void *)CONFIG_SYS_SERIAL0, \
136 					 (void *)CONFIG_SYS_SERIAL1}
137 
138 #define CONFIG_SYS_BAUDRATE_TABLE	{ 9600, 19200, 38400, 57600, 115200 }
139 #define CONFIG_SYS_SERIAL0		V2M_UART0
140 #define CONFIG_SYS_SERIAL1		V2M_UART1
141 
142 #define CONFIG_ARM_PL180_MMCI
143 #define CONFIG_ARM_PL180_MMCI_BASE	V2M_MMCI
144 #define CONFIG_SYS_MMC_MAX_BLK_COUNT	127
145 #define CONFIG_ARM_PL180_MMCI_CLOCK_FREQ 6250000
146 
147 /* BOOTP options */
148 #define CONFIG_BOOTP_BOOTFILESIZE
149 
150 /* Miscellaneous configurable options */
151 #define CONFIG_SYS_LOAD_ADDR		(V2M_BASE + 0x8000)
152 #define LINUX_BOOT_PARAM_ADDR		(V2M_BASE + 0x2000)
153 
154 /* Physical Memory Map */
155 #define CONFIG_NR_DRAM_BANKS		2
156 #define PHYS_SDRAM_1			(V2M_BASE)	/* SDRAM Bank #1 */
157 #define PHYS_SDRAM_2			(((unsigned int)V2M_BASE) + \
158 					((unsigned int)0x20000000))
159 #define PHYS_SDRAM_1_SIZE		0x20000000	/* 512 MB */
160 #define PHYS_SDRAM_2_SIZE		0x20000000	/* 512 MB */
161 
162 /* additions for new relocation code */
163 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
164 #define CONFIG_SYS_INIT_RAM_SIZE		0x1000
165 #define CONFIG_SYS_GBL_DATA_OFFSET	(CONFIG_SYS_SDRAM_BASE + \
166 					 CONFIG_SYS_INIT_RAM_SIZE - \
167 					 GENERATED_GBL_DATA_SIZE)
168 #define CONFIG_SYS_INIT_SP_ADDR		CONFIG_SYS_GBL_DATA_OFFSET
169 
170 /* Basic environment settings */
171 #define BOOT_TARGET_DEVICES(func) \
172         func(MMC, mmc, 1) \
173         func(MMC, mmc, 0) \
174         func(PXE, pxe, na) \
175         func(DHCP, dhcp, na)
176 #include <config_distro_bootcmd.h>
177 
178 #ifdef CONFIG_VEXPRESS_ORIGINAL_MEMORY_MAP
179 #define CONFIG_PLATFORM_ENV_SETTINGS \
180 		"loadaddr=0x80008000\0" \
181 		"ramdisk_addr_r=0x61000000\0" \
182 		"kernel_addr=0x44100000\0" \
183 		"ramdisk_addr=0x44800000\0" \
184 		"maxramdisk=0x1800000\0" \
185 		"pxefile_addr_r=0x88000000\0" \
186 		"scriptaddr=0x88000000\0" \
187 		"kernel_addr_r=0x80008000\0"
188 #elif defined(CONFIG_VEXPRESS_EXTENDED_MEMORY_MAP)
189 #define CONFIG_PLATFORM_ENV_SETTINGS \
190 		"loadaddr=0xa0008000\0" \
191 		"ramdisk_addr_r=0x81000000\0" \
192 		"kernel_addr=0x0c100000\0" \
193 		"ramdisk_addr=0x0c800000\0" \
194 		"maxramdisk=0x1800000\0" \
195 		"pxefile_addr_r=0xa8000000\0" \
196 		"scriptaddr=0xa8000000\0" \
197 		"kernel_addr_r=0xa0008000\0"
198 #endif
199 #define CONFIG_EXTRA_ENV_SETTINGS \
200 		CONFIG_PLATFORM_ENV_SETTINGS \
201                 BOOTENV \
202 		"console=ttyAMA0,38400n8\0" \
203 		"dram=1024M\0" \
204 		"root=/dev/sda1 rw\0" \
205 		"mtd=armflash:1M@0x800000(uboot),7M@0x1000000(kernel)," \
206 			"24M@0x2000000(initrd)\0" \
207 		"flashargs=setenv bootargs root=${root} console=${console} " \
208 			"mem=${dram} mtdparts=${mtd} mmci.fmax=190000 " \
209 			"devtmpfs.mount=0  vmalloc=256M\0" \
210 		"bootflash=run flashargs; " \
211 			"cp ${ramdisk_addr} ${ramdisk_addr_r} ${maxramdisk}; " \
212 			"bootm ${kernel_addr} ${ramdisk_addr_r}\0"
213 
214 /* FLASH and environment organization */
215 #define PHYS_FLASH_SIZE			0x04000000	/* 64MB */
216 #define CONFIG_SYS_FLASH_CFI		1
217 #define CONFIG_FLASH_CFI_DRIVER		1
218 #define CONFIG_SYS_FLASH_SIZE		0x04000000
219 #define CONFIG_SYS_MAX_FLASH_BANKS	2
220 #define CONFIG_SYS_FLASH_BASE0		V2M_NOR0
221 #define CONFIG_SYS_FLASH_BASE1		V2M_NOR1
222 #define CONFIG_SYS_MONITOR_BASE		CONFIG_SYS_FLASH_BASE0
223 
224 /* Timeout values in ticks */
225 #define CONFIG_SYS_FLASH_ERASE_TOUT	(2 * CONFIG_SYS_HZ) /* Erase Timeout */
226 #define CONFIG_SYS_FLASH_WRITE_TOUT	(2 * CONFIG_SYS_HZ) /* Write Timeout */
227 
228 /* 255 0x40000 sectors + first or last sector may have 4 erase regions = 259 */
229 #define CONFIG_SYS_MAX_FLASH_SECT	259		/* Max sectors */
230 #define FLASH_MAX_SECTOR_SIZE		0x00040000	/* 256 KB sectors */
231 
232 /* Room required on the stack for the environment data */
233 #define CONFIG_ENV_SIZE			FLASH_MAX_SECTOR_SIZE
234 
235 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
236 
237 /*
238  * Amount of flash used for environment:
239  * We don't know which end has the small erase blocks so we use the penultimate
240  * sector location for the environment
241  */
242 #define CONFIG_ENV_SECT_SIZE		FLASH_MAX_SECTOR_SIZE
243 #define CONFIG_ENV_OVERWRITE		1
244 
245 /* Store environment at top of flash */
246 #define CONFIG_ENV_OFFSET		(PHYS_FLASH_SIZE - \
247 					(2 * CONFIG_ENV_SECT_SIZE))
248 #define CONFIG_ENV_ADDR			(CONFIG_SYS_FLASH_BASE1 + \
249 					 CONFIG_ENV_OFFSET)
250 #define CONFIG_SYS_FLASH_PROTECTION	/* The devices have real protection */
251 #define CONFIG_SYS_FLASH_EMPTY_INFO	/* flinfo indicates empty blocks */
252 #define CONFIG_SYS_FLASH_BANKS_LIST	{ CONFIG_SYS_FLASH_BASE0, \
253 					  CONFIG_SYS_FLASH_BASE1 }
254 
255 /* Monitor Command Prompt */
256 #define CONFIG_SYS_CBSIZE		512	/* Console I/O Buffer Size */
257 
258 #endif /* VEXPRESS_COMMON_H */
259