1 /* 2 * (C) Copyright 2008 Stefan Roese <sr@denx.de>, DENX Software Engineering 3 * 4 * This program is free software; you can redistribute it and/or 5 * modify it under the terms of the GNU General Public License as 6 * published by the Free Software Foundation; either version 2 of 7 * the License, or (at your option) any later version. 8 * 9 * This program is distributed in the hope that it will be useful, 10 * but WITHOUT ANY WARRANTY; without even the implied warranty of 11 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 12 * GNU General Public License for more details. 13 * 14 * You should have received a copy of the GNU General Public License 15 * along with this program; if not, write to the Free Software 16 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, 17 * MA 02111-1307 USA 18 */ 19 20 /* 21 * This file contains the configuration parameters for the VCT board 22 * family: 23 * 24 * vct_premium 25 * vct_premium_small 26 * vct_premium_onenand 27 * vct_premium_onenand_small 28 * vct_platinum 29 * vct_platinum_small 30 * vct_platinum_onenand 31 * vct_platinum_onenand_small 32 * vct_platinumavc 33 * vct_platinumavc_small 34 * vct_platinumavc_onenand 35 * vct_platinumavc_onenand_small 36 */ 37 38 #ifndef __CONFIG_H 39 #define __CONFIG_H 40 41 #define CONFIG_MIPS32 /* MIPS 4Kc CPU core */ 42 #define CPU_CLOCK_RATE 324000000 /* Clock for the MIPS core */ 43 #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) 44 #define CONFIG_SYS_HZ 1000 45 46 #define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */ 47 48 #define CONFIG_SYS_MONITOR_BASE TEXT_BASE 49 #define CONFIG_SYS_MONITOR_LEN (256 << 10) 50 #define CONFIG_STACKSIZE (256 << 10) 51 #define CONFIG_SYS_MALLOC_LEN (1 << 20) 52 #define CONFIG_SYS_BOOTPARAMS_LEN (128 << 10) 53 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 54 55 #if !defined(CONFIG_VCT_NAND) && !defined(CONFIG_VCT_ONENAND) 56 #define CONFIG_VCT_NOR 57 #else 58 #define CONFIG_SYS_NO_FLASH 59 #endif 60 61 /* 62 * UART 63 */ 64 #ifdef CONFIG_VCT_PLATINUMAVC 65 #define UART_1_BASE 0xBDC30000 66 #else 67 #define UART_1_BASE 0xBF89C000 68 #endif 69 70 #define CONFIG_SYS_NS16550_SERIAL 71 #define CONFIG_SYS_NS16550 72 #define CONFIG_SYS_NS16550_REG_SIZE -4 73 #define CONFIG_SYS_NS16550_COM1 UART_1_BASE 74 #define CONFIG_CONS_INDEX 1 75 #define CONFIG_SYS_NS16550_CLK 921600 76 #define CONFIG_BAUDRATE 115200 77 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 } 78 79 /* 80 * SDRAM 81 */ 82 #define CONFIG_SYS_SDRAM_BASE 0x80000000 83 #define CONFIG_SYS_MBYTES_SDRAM 128 84 #define CONFIG_SYS_MEMTEST_START 0x80200000 85 #define CONFIG_SYS_MEMTEST_END 0x80400000 86 #define CONFIG_SYS_LOAD_ADDR 0x80400000 /* default load address */ 87 88 #if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) 89 /* 90 * SMSC91C11x Network Card 91 */ 92 #define CONFIG_SMC911X 93 #define CONFIG_SMC911X_BASE 0x00000000 94 #define CONFIG_SMC911X_32_BIT 95 #define CONFIG_NET_RETRY_COUNT 20 96 #define CONFIG_NET_MULTI 97 #endif 98 99 /* 100 * Commands 101 */ 102 #include <config_cmd_default.h> 103 104 #define CONFIG_CMD_DHCP 105 #define CONFIG_CMD_ELF 106 #define CONFIG_CMD_EEPROM 107 #define CONFIG_CMD_I2C 108 109 /* 110 * Only Premium/Platinum have ethernet support right now 111 */ 112 #if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) 113 #define CONFIG_CMD_PING 114 #define CONFIG_CMD_SNTP 115 #else 116 #undef CONFIG_CMD_NET 117 #endif 118 119 /* 120 * Only Premium/Platinum have USB-EHCI support right now 121 */ 122 #if defined(CONFIG_VCT_PREMIUM) || defined(CONFIG_VCT_PLATINUM) 123 #define CONFIG_CMD_USB 124 #define CONFIG_CMD_FAT 125 #endif 126 127 #if defined(CONFIG_CMD_USB) 128 #define CONFIG_USB_STORAGE 129 #define CONFIG_DOS_PARTITION 130 #define CONFIG_ISO_PARTITION 131 132 #define CONFIG_SUPPORT_VFAT 133 134 /* 135 * USB/EHCI 136 */ 137 #define CONFIG_USB_EHCI /* Enable EHCI USB support */ 138 #define CONFIG_USB_EHCI_VCT /* on VCT platform */ 139 #define CONFIG_EHCI_DCACHE /* with dcache handling support */ 140 #define CONFIG_EHCI_MMIO_BIG_ENDIAN 141 #define CONFIG_EHCI_DESC_BIG_ENDIAN 142 #define CONFIG_EHCI_IS_TDI 143 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* re-init HCD after CMD_RESET */ 144 #endif /* CONFIG_CMD_USB */ 145 146 #if !defined(CONFIG_VCT_NOR) 147 #undef CONFIG_CMD_FLASH 148 #undef CONFIG_CMD_IMLS 149 #endif 150 151 #if defined(CONFIG_VCT_NAND) 152 #define CONFIG_CMD_NAND 153 #endif 154 155 #if defined(CONFIG_VCT_ONENAND) 156 #define CONFIG_CMD_ONENAND 157 #endif 158 159 /* 160 * BOOTP options 161 */ 162 #define CONFIG_BOOTP_BOOTFILESIZE 163 #define CONFIG_BOOTP_BOOTPATH 164 #define CONFIG_BOOTP_GATEWAY 165 #define CONFIG_BOOTP_HOSTNAME 166 #define CONFIG_BOOTP_SUBNETMASK 167 168 /* 169 * Miscellaneous configurable options 170 */ 171 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 172 #define CONFIG_SYS_PROMPT "VCT# " /* Monitor Command Prompt */ 173 #define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */ 174 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \ 175 sizeof(CONFIG_SYS_PROMPT) + 16) 176 #define CONFIG_SYS_MAXARGS 16 /* max number of command args */ 177 #define CONFIG_TIMESTAMP /* Print image info with timestamp */ 178 #define CONFIG_CMDLINE_EDITING /* add command line history */ 179 #define CONFIG_SYS_CONSOLE_INFO_QUIET /* don't print console @ startup*/ 180 181 /* 182 * FLASH and environment organization 183 */ 184 #if defined(CONFIG_VCT_NOR) 185 #define CONFIG_ENV_IS_IN_FLASH 186 #define CONFIG_FLASH_NOT_MEM_MAPPED 187 188 /* 189 * We need special accessor functions for the CFI FLASH driver. This 190 * can be enabled via the CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS option. 191 */ 192 #define CONFIG_CFI_FLASH_USE_WEAK_ACCESSORS 193 194 /* 195 * For the non-memory-mapped NOR FLASH, we need to define the 196 * NOR FLASH area. This can't be detected via the addr2info() 197 * function, since we check for flash access in the very early 198 * U-Boot code, before the NOR FLASH is detected. 199 */ 200 #define CONFIG_FLASH_BASE 0xb0000000 201 #define CONFIG_FLASH_END 0xbfffffff 202 203 /* 204 * CFI driver settings 205 */ 206 #define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */ 207 #define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */ 208 #define CONFIG_SYS_FLASH_CFI_AMD_RESET 1 /* Use AMD (Spansion) reset cmd */ 209 #define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT /* no byte writes on IXP4xx */ 210 211 #define CONFIG_SYS_FLASH_BASE 0xb0000000 212 #define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE } 213 #define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */ 214 #define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */ 215 216 #define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */ 217 #define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */ 218 219 #ifdef CONFIG_ENV_IS_IN_FLASH 220 #define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */ 221 #define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_LEN) 222 #define CONFIG_ENV_SIZE 0x4000 /* Total Size of Environment Sector */ 223 224 /* Address and size of Redundant Environment Sector */ 225 #define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE) 226 #define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE) 227 #endif /* CONFIG_ENV_IS_IN_FLASH */ 228 #endif /* CONFIG_VCT_NOR */ 229 230 #if defined(CONFIG_VCT_ONENAND) 231 #define CONFIG_USE_ONENAND_BOARD_INIT 232 #define CONFIG_ENV_IS_IN_ONENAND 233 #define CONFIG_SYS_ONENAND_BASE 0x00000000 /* this is not real address */ 234 #define CONFIG_SYS_FLASH_BASE 0x00000000 235 #define CONFIG_ENV_ADDR (128 << 10) /* after compr. U-Boot image */ 236 #define CONFIG_ENV_SIZE (128 << 10) /* erase size */ 237 #endif /* CONFIG_VCT_ONENAND */ 238 239 /* 240 * Cache Configuration 241 */ 242 #define CONFIG_SYS_DCACHE_SIZE 16384 243 #define CONFIG_SYS_ICACHE_SIZE 16384 244 #define CONFIG_SYS_CACHELINE_SIZE 32 245 246 /* 247 * I2C/EEPROM 248 */ 249 #undef CONFIG_HARD_I2C /* I2C with hardware support */ 250 #define CONFIG_SOFT_I2C /* I2C bit-banged */ 251 252 #define CONFIG_SYS_I2C_SPEED 83000 /* 83 kHz is supposed to work */ 253 #define CONFIG_SYS_I2C_SLAVE 0x7f 254 255 /* 256 * Software (bit-bang) I2C driver configuration 257 */ 258 #define CONFIG_SYS_GPIO_I2C_SCL 11 259 #define CONFIG_SYS_GPIO_I2C_SDA 10 260 261 #ifndef __ASSEMBLY__ 262 int vct_gpio_dir(int pin, int dir); 263 void vct_gpio_set(int pin, int val); 264 int vct_gpio_get(int pin); 265 #endif 266 267 #define I2C_INIT vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SCL, 1) 268 #define I2C_ACTIVE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 1) 269 #define I2C_TRISTATE vct_gpio_dir(CONFIG_SYS_GPIO_I2C_SDA, 0) 270 #define I2C_READ vct_gpio_get(CONFIG_SYS_GPIO_I2C_SDA) 271 #define I2C_SDA(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SDA, bit) 272 #define I2C_SCL(bit) vct_gpio_set(CONFIG_SYS_GPIO_I2C_SCL, bit) 273 #define I2C_DELAY udelay(5) /* 1/4 I2C clock duration */ 274 275 #define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 276 /* CAT24WC32 */ 277 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */ 278 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* The Catalyst CAT24WC32 has */ 279 /* 32 byte page write mode using*/ 280 /* last 5 bits of the address */ 281 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */ 282 283 #define CONFIG_BOOTCOMMAND "run test3" 284 #define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */ 285 286 /* 287 * UBI configuration 288 */ 289 #if defined(CONFIG_VCT_ONENAND) 290 #define CONFIG_SYS_USE_UBI 291 #define CONFIG_CMD_JFFS2 292 #define CONFIG_CMD_UBI 293 #define CONFIG_RBTREE 294 #define CONFIG_MTD_DEVICE /* needed for mtdparts commands */ 295 #define CONFIG_MTD_PARTITIONS 296 #define CONFIG_CMD_MTDPARTS 297 298 #define MTDIDS_DEFAULT "onenand0=onenand" 299 #define MTDPARTS_DEFAULT "mtdparts=onenand:128k(u-boot)," \ 300 "128k(env)," \ 301 "20m(kernel)," \ 302 "-(rootfs)" 303 #endif 304 305 /* 306 * We need a small, stripped down image to fit into the first 128k OneNAND 307 * erase block (gzipped). This image only needs basic commands for FLASH 308 * (NOR/OneNAND) usage and Linux kernel booting. 309 */ 310 #if defined(CONFIG_VCT_SMALL_IMAGE) 311 #undef CONFIG_CMD_ASKENV 312 #undef CONFIG_CMD_BDI 313 #undef CONFIG_CMD_BEDBUG 314 #undef CONFIG_CMD_CACHE 315 #undef CONFIG_CMD_CONSOLE 316 #undef CONFIG_CMD_CRC32 317 #undef CONFIG_CMD_DHCP 318 #undef CONFIG_CMD_EEPROM 319 #undef CONFIG_CMD_EEPROM 320 #undef CONFIG_CMD_ELF 321 #undef CONFIG_CMD_FAT 322 #undef CONFIG_CMD_I2C 323 #undef CONFIG_CMD_I2C 324 #undef CONFIG_CMD_IRQ 325 #undef CONFIG_CMD_ITEST 326 #undef CONFIG_CMD_LOADB 327 #undef CONFIG_CMD_LOADS 328 #undef CONFIG_CMD_LOADY 329 #undef CONFIG_CMD_MII 330 #undef CONFIG_CMD_MISC 331 #undef CONFIG_CMD_NET 332 #undef CONFIG_CMD_PING 333 #undef CONFIG_CMD_REGINFO 334 #undef CONFIG_CMD_SNTP 335 #undef CONFIG_CMD_SOURCE 336 #undef CONFIG_CMD_STRINGS 337 #undef CONFIG_CMD_TERMINAL 338 #undef CONFIG_CMD_USB 339 340 #undef CONFIG_SMC911X 341 #undef CONFIG_SOFT_I2C 342 #undef CONFIG_SOURCE 343 #undef CONFIG_SYS_LONGHELP 344 #undef CONFIG_TIMESTAMP 345 #endif /* CONFIG_VCT_SMALL_IMAGE */ 346 347 #endif /* __CONFIG_H */ 348