1 /* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */ 2 /* 3 * Copyright (c) 2018 Microsemi Corporation 4 */ 5 6 #ifndef __VCOREIII_H 7 #define __VCOREIII_H 8 9 #include <linux/sizes.h> 10 11 /* Onboard devices */ 12 13 #define CONFIG_SYS_MALLOC_LEN 0x100000 14 #define CONFIG_SYS_LOAD_ADDR 0x00100000 15 #define CONFIG_SYS_INIT_SP_OFFSET 0x400000 16 17 #define CPU_CLOCK_RATE 500000000 /* Clock for the MIPS core */ 18 #ifdef CONFIG_SOC_LUTON 19 #define CONFIG_SYS_MIPS_TIMER_FREQ 208333333 20 #else 21 #define CONFIG_SYS_MIPS_TIMER_FREQ (CPU_CLOCK_RATE / 2) 22 #endif 23 #define CONFIG_SYS_NS16550_CLK CONFIG_SYS_MIPS_TIMER_FREQ 24 25 #if defined(CONFIG_ENV_IS_IN_SPI_FLASH) && !defined(CONFIG_ENV_OFFSET) 26 #define CONFIG_ENV_OFFSET (1024 * 1024) 27 #define CONFIG_ENV_SIZE (256 * 1024) 28 #define CONFIG_ENV_SECT_SIZE (256 * 1024) 29 30 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT 31 #define CONFIG_ENV_SIZE_REDUND CONFIG_ENV_SIZE 32 #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE) 33 34 #define CONFIG_ENV_SPI_MAX_HZ 0 /* This force to read from DT */ 35 #define CONFIG_ENV_SPI_MODE 0 /* This force to read from DT */ 36 #endif 37 38 #define CONFIG_SYS_SDRAM_BASE 0x80000000 39 #if defined(CONFIG_DDRTYPE_H5TQ1G63BFA) || defined(CONFIG_DDRTYPE_MT47H128M8HQ) 40 #define CONFIG_SYS_SDRAM_SIZE (128 * SZ_1M) 41 #elif defined(CONFIG_DDRTYPE_MT41J128M16HA) || defined(CONFIG_DDRTYPE_MT41K128M16JT) 42 #define CONFIG_SYS_SDRAM_SIZE (256 * SZ_1M) 43 #elif defined(CONFIG_DDRTYPE_H5TQ4G63MFR) || defined(CONFIG_DDRTYPE_MT41K256M16) 44 #define CONFIG_SYS_SDRAM_SIZE (512 * SZ_1M) 45 #else 46 #error Unknown DDR size - please add! 47 #endif 48 49 #define CONFIG_CONS_INDEX 1 50 51 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 52 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_SDRAM_SIZE - SZ_1M) 53 54 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE 55 56 #define CONFIG_BOARD_EARLY_INIT_R 57 #if defined(CONFIG_MTDIDS_DEFAULT) && defined(CONFIG_MTDPARTS_DEFAULT) 58 #define VCOREIII_DEFAULT_MTD_ENV \ 59 "mtdparts="CONFIG_MTDPARTS_DEFAULT"\0" \ 60 "mtdids="CONFIG_MTDIDS_DEFAULT"\0" 61 #else 62 #define VCOREIII_DEFAULT_MTD_ENV /* Go away */ 63 #endif 64 65 #define CONFIG_SYS_BOOTM_LEN (16 << 20) /* Increase max gunzip size */ 66 67 #define CONFIG_EXTRA_ENV_SETTINGS \ 68 VCOREIII_DEFAULT_MTD_ENV \ 69 "loadaddr=0x81000000\0" \ 70 "spi_image_off=0x00100000\0" \ 71 "console=ttyS0,115200\0" \ 72 "setup=setenv bootargs console=${console} ${mtdparts}" \ 73 "${bootargs_extra}\0" \ 74 "spiboot=run setup; sf probe; sf read ${loadaddr}" \ 75 "${spi_image_off} 0x600000; bootm ${loadaddr}\0" \ 76 "ubootfile=u-boot.bin\0" \ 77 "update=sf probe;mtdparts;dhcp ${loadaddr} ${ubootfile};" \ 78 "sf erase UBoot 0x100000;" \ 79 "sf write ${loadaddr} UBoot ${filesize}\0" \ 80 "bootcmd=run spiboot\0" \ 81 "" 82 #endif /* __VCOREIII_H */ 83