1 /* 2 * USB armory MkI board configuration settings 3 * http://inversepath.com/usbarmory 4 * 5 * Copyright (C) 2015, Inverse Path 6 * Andrej Rosano <andrej@inversepath.com> 7 * 8 * SPDX-License-Identifier:|____GPL-2.0+ 9 */ 10 11 #ifndef __CONFIG_H 12 #define __CONFIG_H 13 14 #define CONFIG_MX53 15 #define CONFIG_SYS_FSL_CLK 16 #define CONFIG_MXC_GPIO 17 #define CONFIG_SYS_NO_FLASH 18 19 #include <asm/arch/imx-regs.h> 20 21 #include <config_distro_defaults.h> 22 23 /* U-Boot environment */ 24 #define CONFIG_ENV_OFFSET (6 * 64 * 1024) 25 #define CONFIG_ENV_SIZE (8 * 1024) 26 #define CONFIG_ENV_IS_IN_MMC 27 #define CONFIG_SYS_MMC_ENV_DEV 0 28 29 /* U-Boot general configurations */ 30 #define CONFIG_SYS_CBSIZE 512 31 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) 32 #define CONFIG_SYS_MAXARGS 16 33 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE 34 35 /* UART */ 36 #define CONFIG_MXC_UART 37 #define CONFIG_MXC_UART_BASE UART1_BASE 38 #define CONFIG_CONS_INDEX 1 39 #define CONFIG_BAUDRATE 115200 40 41 /* SD/MMC */ 42 #define CONFIG_FSL_ESDHC 43 #define CONFIG_SYS_FSL_ESDHC_ADDR 0 44 #define CONFIG_SYS_FSL_ESDHC_NUM 1 45 46 /* USB */ 47 #define CONFIG_USB_EHCI 48 #define CONFIG_USB_EHCI_MX5 49 #define CONFIG_MXC_USB_PORT 1 50 #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) 51 #define CONFIG_MXC_USB_FLAGS 0 52 53 /* I2C */ 54 #define CONFIG_SYS_I2C 55 #define CONFIG_SYS_I2C_MXC 56 #define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */ 57 #define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */ 58 59 /* Fuse */ 60 #define CONFIG_CMD_FUSE 61 #define CONFIG_FSL_IIM 62 63 /* U-Boot memory offsets */ 64 #define CONFIG_LOADADDR 0x72000000 65 #define CONFIG_SYS_TEXT_BASE 0x77800000 66 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 67 68 /* Linux boot */ 69 #define CONFIG_HOSTNAME usbarmory 70 #define CONFIG_BOOTCOMMAND \ 71 "run distro_bootcmd; " \ 72 "setenv bootargs console=${console} ${bootargs_default}; " \ 73 "ext2load mmc 0:1 ${kernel_addr_r} /boot/zImage; " \ 74 "ext2load mmc 0:1 ${fdt_addr_r} /boot/${fdtfile}; " \ 75 "bootz ${kernel_addr_r} - ${fdt_addr_r}" 76 77 #define BOOT_TARGET_DEVICES(func) func(MMC, mmc, 0) 78 79 #include <config_distro_bootcmd.h> 80 81 #define MEM_LAYOUT_ENV_SETTINGS \ 82 "kernel_addr_r=0x70800000\0" \ 83 "fdt_addr_r=0x71000000\0" \ 84 "scriptaddr=0x70800000\0" \ 85 "pxefile_addr_r=0x70800000\0" \ 86 "ramdisk_addr_r=0x73000000\0" 87 88 #define CONFIG_EXTRA_ENV_SETTINGS \ 89 MEM_LAYOUT_ENV_SETTINGS \ 90 "bootargs_default=root=/dev/mmcblk0p1 rootwait rw\0" \ 91 "fdtfile=imx53-usbarmory.dtb\0" \ 92 "console=ttymxc0,115200\0" \ 93 BOOTENV 94 95 #ifndef CONFIG_CMDLINE 96 #define CONFIG_BOOTARGS "console=ttymxc0,115200 root=/dev/mmcblk0p1 rootwait rw" 97 #define USBARMORY_FIT_PATH "/boot/usbarmory.itb" 98 #define USBARMORY_FIT_ADDR "0x70800000" 99 #endif 100 101 /* Physical Memory Map */ 102 #define CONFIG_NR_DRAM_BANKS 1 103 #define PHYS_SDRAM CSD0_BASE_ADDR 104 #define PHYS_SDRAM_SIZE (gd->ram_size) 105 106 #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM 107 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR 108 #define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE 109 110 #define CONFIG_SYS_INIT_SP_OFFSET \ 111 (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) 112 #define CONFIG_SYS_INIT_SP_ADDR \ 113 (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) 114 115 #define CONFIG_SYS_MEMTEST_START 0x70000000 116 #define CONFIG_SYS_MEMTEST_END 0x90000000 117 118 #define CONFIG_SYS_MALLOC_LEN (10 * 1024 * 1024) 119 120 #endif /* __CONFIG_H */ 121