1 /* 2 * Copyright (C) 2012-2015 Panasonic Corporation 3 * Copyright (C) 2015-2016 Socionext Inc. 4 * Author: Masahiro Yamada <yamada.masahiro@socionext.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 /* U-Boot - Common settings for UniPhier Family */ 10 11 #ifndef __CONFIG_UNIPHIER_COMMON_H__ 12 #define __CONFIG_UNIPHIER_COMMON_H__ 13 14 #define CONFIG_ARMV7_PSCI_1_0 15 16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 17 18 /*----------------------------------------------------------------------- 19 * MMU and Cache Setting 20 *----------------------------------------------------------------------*/ 21 22 /* Comment out the following to enable L1 cache */ 23 /* #define CONFIG_SYS_ICACHE_OFF */ 24 /* #define CONFIG_SYS_DCACHE_OFF */ 25 26 #define CONFIG_BOARD_LATE_INIT 27 28 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 29 30 #define CONFIG_TIMESTAMP 31 32 /* FLASH related */ 33 #define CONFIG_MTD_DEVICE 34 35 #define CONFIG_SMC911X_32_BIT 36 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */ 37 #define CONFIG_SMC911X_BASE 0 38 39 #ifdef CONFIG_MICRO_SUPPORT_CARD 40 #define CONFIG_SMC911X 41 #else 42 #define CONFIG_SYS_NO_FLASH 43 #endif 44 45 #define CONFIG_FLASH_CFI_DRIVER 46 #define CONFIG_SYS_FLASH_CFI 47 48 #define CONFIG_SYS_MAX_FLASH_SECT 256 49 #define CONFIG_SYS_MONITOR_BASE 0 50 #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */ 51 #define CONFIG_SYS_FLASH_BASE 0 52 53 /* 54 * flash_toggle does not work for our support card. 55 * We need to use flash_status_poll. 56 */ 57 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL 58 59 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 60 61 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 62 63 /* serial console configuration */ 64 #define CONFIG_BAUDRATE 115200 65 66 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) 67 #define CONFIG_USE_ARCH_MEMSET 68 #define CONFIG_USE_ARCH_MEMCPY 69 #endif 70 71 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 72 73 #define CONFIG_CMDLINE_EDITING /* add command line history */ 74 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 75 /* Print Buffer Size */ 76 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 77 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 78 /* Boot Argument Buffer Size */ 79 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 80 81 #define CONFIG_CONS_INDEX 1 82 83 /* #define CONFIG_ENV_IS_NOWHERE */ 84 /* #define CONFIG_ENV_IS_IN_NAND */ 85 #define CONFIG_ENV_IS_IN_MMC 86 #define CONFIG_ENV_OFFSET 0x80000 87 #define CONFIG_ENV_SIZE 0x2000 88 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ 89 90 #define CONFIG_SYS_MMC_ENV_DEV 0 91 #define CONFIG_SYS_MMC_ENV_PART 1 92 93 #ifdef CONFIG_ARM64 94 #define CPU_RELEASE_ADDR 0x80000000 95 #define COUNTER_FREQUENCY 50000000 96 #define CONFIG_GICV3 97 #define GICD_BASE 0x5fe00000 98 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 99 #define GICR_BASE 0x5fe40000 100 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 101 #define GICR_BASE 0x5fe80000 102 #endif 103 #else 104 /* Time clock 1MHz */ 105 #define CONFIG_SYS_TIMER_RATE 1000000 106 #endif 107 108 109 #define CONFIG_SYS_MAX_NAND_DEVICE 1 110 #define CONFIG_SYS_NAND_MAX_CHIPS 2 111 #define CONFIG_SYS_NAND_ONFI_DETECTION 112 113 #define CONFIG_NAND_DENALI_ECC_SIZE 1024 114 115 #ifdef CONFIG_ARCH_UNIPHIER_SLD3 116 #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 117 #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 118 #else 119 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 120 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 121 #endif 122 123 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) 124 125 #define CONFIG_SYS_NAND_USE_FLASH_BBT 126 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 127 128 /* USB */ 129 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 130 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 131 #define CONFIG_FAT_WRITE 132 #define CONFIG_DOS_PARTITION 133 134 /* SD/MMC */ 135 #define CONFIG_SUPPORT_EMMC_BOOT 136 #define CONFIG_GENERIC_MMC 137 138 /* memtest works on */ 139 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 140 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) 141 142 /* 143 * Network Configuration 144 */ 145 #define CONFIG_SERVERIP 192.168.11.1 146 #define CONFIG_IPADDR 192.168.11.10 147 #define CONFIG_GATEWAYIP 192.168.11.1 148 #define CONFIG_NETMASK 255.255.255.0 149 150 #define CONFIG_LOADADDR 0x84000000 151 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 152 153 #define CONFIG_CMDLINE_EDITING /* add command line history */ 154 155 #define CONFIG_BOOTCOMMAND "run $bootmode" 156 157 #define CONFIG_ROOTPATH "/nfs/root/path" 158 #define CONFIG_NFSBOOTCOMMAND \ 159 "setenv bootargs $bootargs root=/dev/nfs rw " \ 160 "nfsroot=$serverip:$rootpath " \ 161 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ 162 "run __nfsboot" 163 164 #ifdef CONFIG_FIT 165 #define CONFIG_BOOTFILE "fitImage" 166 #define LINUXBOOT_ENV_SETTINGS \ 167 "fit_addr=0x00100000\0" \ 168 "fit_addr_r=0x84100000\0" \ 169 "fit_size=0x00f00000\0" \ 170 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ 171 "bootm $fit_addr\0" \ 172 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ 173 "bootm $fit_addr_r\0" \ 174 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ 175 "bootm $fit_addr_r\0" \ 176 "__nfsboot=run tftpboot\0" 177 #else 178 #ifdef CONFIG_ARM64 179 #define CONFIG_BOOTFILE "Image" 180 #define LINUXBOOT_CMD "booti" 181 #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" 182 #define KERNEL_SIZE "kernel_size=0x00c00000\0" 183 #define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" 184 #else 185 #define CONFIG_BOOTFILE "zImage" 186 #define LINUXBOOT_CMD "bootz" 187 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" 188 #define KERNEL_SIZE "kernel_size=0x00800000\0" 189 #define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" 190 #endif 191 #define LINUXBOOT_ENV_SETTINGS \ 192 "fdt_addr=0x00100000\0" \ 193 "fdt_addr_r=0x84100000\0" \ 194 "fdt_size=0x00008000\0" \ 195 "kernel_addr=0x00200000\0" \ 196 KERNEL_ADDR_R \ 197 KERNEL_SIZE \ 198 RAMDISK_ADDR \ 199 "ramdisk_addr_r=0x84a00000\0" \ 200 "ramdisk_size=0x00600000\0" \ 201 "ramdisk_file=rootfs.cpio.uboot\0" \ 202 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ 203 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ 204 "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ 205 "setexpr kernel_size $kernel_size / 4 &&" \ 206 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ 207 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ 208 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ 209 "run boot_common\0" \ 210 "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ 211 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ 212 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ 213 "run boot_common\0" \ 214 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ 215 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ 216 "tftpboot $fdt_addr_r $fdt_file &&" \ 217 "run boot_common\0" \ 218 "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \ 219 "tftpboot $fdt_addr_r $fdt_file &&" \ 220 "setenv ramdisk_addr_r - &&" \ 221 "run boot_common\0" 222 #endif 223 224 #define CONFIG_EXTRA_ENV_SETTINGS \ 225 "netdev=eth0\0" \ 226 "verify=n\0" \ 227 "nor_base=0x42000000\0" \ 228 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ 229 "tftpboot $tmp_addr u-boot-spl.bin &&" \ 230 "setexpr tmp_addr $nor_base + 0x60000 &&" \ 231 "tftpboot $tmp_addr u-boot.bin\0" \ 232 "emmcupdate=mmcsetn &&" \ 233 "mmc partconf $mmc_first_dev 0 1 1 &&" \ 234 "tftpboot u-boot-spl.bin &&" \ 235 "mmc write $loadaddr 0 80 &&" \ 236 "tftpboot u-boot.bin &&" \ 237 "mmc write $loadaddr 80 780\0" \ 238 "nandupdate=nand erase 0 0x00100000 &&" \ 239 "tftpboot u-boot-spl.bin &&" \ 240 "nand write $loadaddr 0 0x00010000 &&" \ 241 "tftpboot u-boot.bin &&" \ 242 "nand write $loadaddr 0x00010000 0x000f0000\0" \ 243 LINUXBOOT_ENV_SETTINGS 244 245 #define CONFIG_SYS_BOOTMAPSZ 0x20000000 246 247 #define CONFIG_SYS_SDRAM_BASE 0x80000000 248 #define CONFIG_NR_DRAM_BANKS 2 249 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ 250 #define CONFIG_SYS_MEM_TOP_HIDE 64 251 252 #if defined(CONFIG_ARM64) 253 #define CONFIG_SPL_TEXT_BASE 0x30000000 254 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ 255 defined(CONFIG_ARCH_UNIPHIER_LD4) || \ 256 defined(CONFIG_ARCH_UNIPHIER_SLD8) 257 #define CONFIG_SPL_TEXT_BASE 0x00040000 258 #else 259 #define CONFIG_SPL_TEXT_BASE 0x00100000 260 #endif 261 262 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 263 #define CONFIG_SPL_STACK (0x30014c00) 264 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 265 #define CONFIG_SPL_STACK (0x3001c000) 266 #else 267 #define CONFIG_SPL_STACK (0x00100000) 268 #endif 269 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) 270 271 #define CONFIG_PANIC_HANG 272 273 #define CONFIG_SPL_FRAMEWORK 274 #ifdef CONFIG_ARM64 275 #define CONFIG_SPL_BOARD_LOAD_IMAGE 276 #endif 277 278 #define CONFIG_SPL_BOARD_INIT 279 280 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 281 282 /* subtract sizeof(struct image_header) */ 283 #define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) 284 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 285 286 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 287 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 288 #define CONFIG_SPL_MAX_SIZE 0x10000 289 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 290 #define CONFIG_SPL_BSS_START_ADDR 0x30012000 291 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 292 #define CONFIG_SPL_BSS_START_ADDR 0x30016000 293 #endif 294 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 295 296 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ 297