1 /* 2 * Copyright (C) 2012-2015 Panasonic Corporation 3 * Copyright (C) 2015-2016 Socionext Inc. 4 * Author: Masahiro Yamada <yamada.masahiro@socionext.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 /* U-Boot - Common settings for UniPhier Family */ 10 11 #ifndef __CONFIG_UNIPHIER_COMMON_H__ 12 #define __CONFIG_UNIPHIER_COMMON_H__ 13 14 #define CONFIG_ARMV7_PSCI 15 #define CONFIG_ARMV7_PSCI_NR_CPUS 4 16 17 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 18 19 #define CONFIG_SMC911X 20 21 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */ 22 #define CONFIG_SMC911X_BASE 0 23 #define CONFIG_SMC911X_32_BIT 24 25 /*----------------------------------------------------------------------- 26 * MMU and Cache Setting 27 *----------------------------------------------------------------------*/ 28 29 /* Comment out the following to enable L1 cache */ 30 /* #define CONFIG_SYS_ICACHE_OFF */ 31 /* #define CONFIG_SYS_DCACHE_OFF */ 32 33 #ifdef CONFIG_CACHE_UNIPHIER 34 #define CONFIG_SYS_CACHELINE_SIZE 128 35 #else 36 #define CONFIG_SYS_CACHELINE_SIZE 32 37 #endif 38 39 #define CONFIG_DISPLAY_CPUINFO 40 #define CONFIG_DISPLAY_BOARDINFO 41 #define CONFIG_MISC_INIT_F 42 #define CONFIG_BOARD_EARLY_INIT_F 43 #define CONFIG_BOARD_EARLY_INIT_R 44 #define CONFIG_BOARD_LATE_INIT 45 46 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 47 48 #define CONFIG_TIMESTAMP 49 50 /* FLASH related */ 51 #define CONFIG_MTD_DEVICE 52 53 /* 54 * uncomment the following to disable FLASH related code. 55 */ 56 /* #define CONFIG_SYS_NO_FLASH */ 57 58 #define CONFIG_FLASH_CFI_DRIVER 59 #define CONFIG_SYS_FLASH_CFI 60 61 #define CONFIG_SYS_MAX_FLASH_SECT 256 62 #define CONFIG_SYS_MONITOR_BASE 0 63 #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */ 64 #define CONFIG_SYS_FLASH_BASE 0 65 66 /* 67 * flash_toggle does not work for out supoort card. 68 * We need to use flash_status_poll. 69 */ 70 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL 71 72 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 73 74 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 75 76 /* serial console configuration */ 77 #define CONFIG_BAUDRATE 115200 78 79 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) 80 #define CONFIG_USE_ARCH_MEMSET 81 #define CONFIG_USE_ARCH_MEMCPY 82 #endif 83 84 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 85 86 #define CONFIG_CMDLINE_EDITING /* add command line history */ 87 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 88 /* Print Buffer Size */ 89 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 90 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 91 /* Boot Argument Buffer Size */ 92 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 93 94 #define CONFIG_CONS_INDEX 1 95 96 /* #define CONFIG_ENV_IS_NOWHERE */ 97 /* #define CONFIG_ENV_IS_IN_NAND */ 98 #define CONFIG_ENV_IS_IN_MMC 99 #define CONFIG_ENV_OFFSET 0x80000 100 #define CONFIG_ENV_SIZE 0x2000 101 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ 102 103 #define CONFIG_SYS_MMC_ENV_DEV 0 104 #define CONFIG_SYS_MMC_ENV_PART 1 105 106 #ifdef CONFIG_ARM64 107 #define CPU_RELEASE_ADDR 0x80000000 108 #define COUNTER_FREQUENCY 50000000 109 #define CONFIG_GICV3 110 #define GICD_BASE 0x5fe00000 111 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 112 #define GICR_BASE 0x5fe40000 113 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 114 #define GICR_BASE 0x5fe80000 115 #endif 116 #else 117 /* Time clock 1MHz */ 118 #define CONFIG_SYS_TIMER_RATE 1000000 119 #endif 120 121 122 #define CONFIG_SYS_MAX_NAND_DEVICE 1 123 #define CONFIG_SYS_NAND_MAX_CHIPS 2 124 #define CONFIG_SYS_NAND_ONFI_DETECTION 125 126 #define CONFIG_NAND_DENALI_ECC_SIZE 1024 127 128 #ifdef CONFIG_ARCH_UNIPHIER_SLD3 129 #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 130 #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 131 #else 132 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 133 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 134 #endif 135 136 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) 137 138 #define CONFIG_SYS_NAND_USE_FLASH_BBT 139 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 140 141 /* USB */ 142 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 143 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 144 #define CONFIG_FAT_WRITE 145 #define CONFIG_DOS_PARTITION 146 147 /* SD/MMC */ 148 #define CONFIG_SUPPORT_EMMC_BOOT 149 #define CONFIG_GENERIC_MMC 150 151 /* memtest works on */ 152 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 153 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) 154 155 /* 156 * Network Configuration 157 */ 158 #define CONFIG_SERVERIP 192.168.11.1 159 #define CONFIG_IPADDR 192.168.11.10 160 #define CONFIG_GATEWAYIP 192.168.11.1 161 #define CONFIG_NETMASK 255.255.255.0 162 163 #define CONFIG_LOADADDR 0x84000000 164 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 165 166 #define CONFIG_CMDLINE_EDITING /* add command line history */ 167 168 #define CONFIG_BOOTCOMMAND "run $bootmode" 169 170 #define CONFIG_ROOTPATH "/nfs/root/path" 171 #define CONFIG_NFSBOOTCOMMAND \ 172 "setenv bootargs $bootargs root=/dev/nfs rw " \ 173 "nfsroot=$serverip:$rootpath " \ 174 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ 175 "run __nfsboot" 176 177 #ifdef CONFIG_FIT 178 #define CONFIG_BOOTFILE "fitImage" 179 #define LINUXBOOT_ENV_SETTINGS \ 180 "fit_addr=0x00100000\0" \ 181 "fit_addr_r=0x84100000\0" \ 182 "fit_size=0x00f00000\0" \ 183 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ 184 "bootm $fit_addr\0" \ 185 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ 186 "bootm $fit_addr_r\0" \ 187 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ 188 "bootm $fit_addr_r\0" \ 189 "__nfsboot=run tftpboot\0" 190 #else 191 #ifdef CONFIG_ARM64 192 #define CONFIG_CMD_BOOTI 193 #define CONFIG_BOOTFILE "Image" 194 #define LINUXBOOT_CMD "booti" 195 #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" 196 #define KERNEL_SIZE "kernel_size=0x00c00000\0" 197 #define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" 198 #else 199 #define CONFIG_BOOTFILE "zImage" 200 #define LINUXBOOT_CMD "bootz" 201 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" 202 #define KERNEL_SIZE "kernel_size=0x00800000\0" 203 #define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" 204 #endif 205 #define LINUXBOOT_ENV_SETTINGS \ 206 "fdt_addr=0x00100000\0" \ 207 "fdt_addr_r=0x84100000\0" \ 208 "fdt_size=0x00008000\0" \ 209 "kernel_addr=0x00200000\0" \ 210 KERNEL_ADDR_R \ 211 KERNEL_SIZE \ 212 RAMDISK_ADDR \ 213 "ramdisk_addr_r=0x84a00000\0" \ 214 "ramdisk_size=0x00600000\0" \ 215 "ramdisk_file=rootfs.cpio.uboot\0" \ 216 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ 217 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ 218 "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ 219 "setexpr kernel_size $kernel_size / 4 &&" \ 220 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ 221 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ 222 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ 223 "run boot_common\0" \ 224 "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ 225 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ 226 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ 227 "run boot_common\0" \ 228 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ 229 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ 230 "tftpboot $fdt_addr_r $fdt_file &&" \ 231 "run boot_common\0" \ 232 "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \ 233 "tftpboot $fdt_addr_r $fdt_file &&" \ 234 "setenv ramdisk_addr_r - &&" \ 235 "run boot_common\0" 236 #endif 237 238 #define CONFIG_EXTRA_ENV_SETTINGS \ 239 "netdev=eth0\0" \ 240 "verify=n\0" \ 241 "nor_base=0x42000000\0" \ 242 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ 243 "tftpboot $tmp_addr u-boot-spl.bin &&" \ 244 "setexpr tmp_addr $nor_base + 0x60000 &&" \ 245 "tftpboot $tmp_addr u-boot.bin\0" \ 246 "emmcupdate=mmcsetn &&" \ 247 "mmc partconf $mmc_first_dev 0 1 1 &&" \ 248 "tftpboot u-boot-spl.bin &&" \ 249 "mmc write $loadaddr 0 80 &&" \ 250 "tftpboot u-boot.bin &&" \ 251 "mmc write $loadaddr 80 780\0" \ 252 "nandupdate=nand erase 0 0x00100000 &&" \ 253 "tftpboot u-boot-spl.bin &&" \ 254 "nand write $loadaddr 0 0x00010000 &&" \ 255 "tftpboot u-boot.bin &&" \ 256 "nand write $loadaddr 0x00010000 0x000f0000\0" \ 257 LINUXBOOT_ENV_SETTINGS 258 259 #define CONFIG_SYS_BOOTMAPSZ 0x20000000 260 261 #define CONFIG_SYS_SDRAM_BASE 0x80000000 262 #define CONFIG_NR_DRAM_BANKS 2 263 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ 264 #define CONFIG_SYS_MEM_TOP_HIDE 64 265 266 #if defined(CONFIG_ARM64) 267 #define CONFIG_SPL_TEXT_BASE 0x30000000 268 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ 269 defined(CONFIG_ARCH_UNIPHIER_LD4) || \ 270 defined(CONFIG_ARCH_UNIPHIER_SLD8) 271 #define CONFIG_SPL_TEXT_BASE 0x00040000 272 #else 273 #define CONFIG_SPL_TEXT_BASE 0x00100000 274 #endif 275 276 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 277 #define CONFIG_SPL_STACK (0x30014c00) 278 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 279 #define CONFIG_SPL_STACK (0x3001c000) 280 #else 281 #define CONFIG_SPL_STACK (0x00100000) 282 #endif 283 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) 284 285 #define CONFIG_PANIC_HANG 286 287 #define CONFIG_SPL_FRAMEWORK 288 #define CONFIG_SPL_SERIAL_SUPPORT 289 #define CONFIG_SPL_NOR_SUPPORT 290 #ifdef CONFIG_ARM64 291 #define CONFIG_SPL_BOARD_LOAD_IMAGE 292 #else 293 #define CONFIG_SPL_NAND_SUPPORT 294 #define CONFIG_SPL_MMC_SUPPORT 295 #endif 296 297 #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ 298 #define CONFIG_SPL_LIBGENERIC_SUPPORT 299 300 #define CONFIG_SPL_BOARD_INIT 301 302 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 303 304 /* subtract sizeof(struct image_header) */ 305 #define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) 306 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 307 308 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 309 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 310 #define CONFIG_SPL_MAX_SIZE 0x10000 311 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 312 #define CONFIG_SPL_BSS_START_ADDR 0x30012000 313 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 314 #define CONFIG_SPL_BSS_START_ADDR 0x30016000 315 #endif 316 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 317 318 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ 319