1 /* 2 * Copyright (C) 2012-2015 Panasonic Corporation 3 * Copyright (C) 2015-2016 Socionext Inc. 4 * Author: Masahiro Yamada <yamada.masahiro@socionext.com> 5 * 6 * SPDX-License-Identifier: GPL-2.0+ 7 */ 8 9 /* U-Boot - Common settings for UniPhier Family */ 10 11 #ifndef __CONFIG_UNIPHIER_COMMON_H__ 12 #define __CONFIG_UNIPHIER_COMMON_H__ 13 14 #define CONFIG_ARMV7_PSCI_1_0 15 16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 17 18 /*----------------------------------------------------------------------- 19 * MMU and Cache Setting 20 *----------------------------------------------------------------------*/ 21 22 /* Comment out the following to enable L1 cache */ 23 /* #define CONFIG_SYS_ICACHE_OFF */ 24 /* #define CONFIG_SYS_DCACHE_OFF */ 25 26 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 27 28 #define CONFIG_TIMESTAMP 29 30 /* FLASH related */ 31 #define CONFIG_MTD_DEVICE 32 33 #define CONFIG_SMC911X_32_BIT 34 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */ 35 #define CONFIG_SMC911X_BASE 0 36 37 #ifdef CONFIG_MICRO_SUPPORT_CARD 38 #define CONFIG_SMC911X 39 #endif 40 41 #define CONFIG_FLASH_CFI_DRIVER 42 #define CONFIG_SYS_FLASH_CFI 43 44 #define CONFIG_SYS_MAX_FLASH_SECT 256 45 #define CONFIG_SYS_MONITOR_BASE 0 46 #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */ 47 #define CONFIG_SYS_FLASH_BASE 0 48 49 /* 50 * flash_toggle does not work for our support card. 51 * We need to use flash_status_poll. 52 */ 53 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL 54 55 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 56 57 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 58 59 /* serial console configuration */ 60 61 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 62 63 #define CONFIG_CMDLINE_EDITING /* add command line history */ 64 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 65 /* Print Buffer Size */ 66 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 67 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 68 /* Boot Argument Buffer Size */ 69 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 70 71 #define CONFIG_CONS_INDEX 1 72 73 /* #define CONFIG_ENV_IS_NOWHERE */ 74 /* #define CONFIG_ENV_IS_IN_NAND */ 75 #define CONFIG_ENV_IS_IN_MMC 76 #define CONFIG_ENV_OFFSET 0x100000 77 #define CONFIG_ENV_SIZE 0x2000 78 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ 79 80 #define CONFIG_SYS_MMC_ENV_DEV 0 81 #define CONFIG_SYS_MMC_ENV_PART 1 82 83 #ifdef CONFIG_ARMV8_MULTIENTRY 84 #define CPU_RELEASE_ADDR 0x80000000 85 #define COUNTER_FREQUENCY 50000000 86 #define CONFIG_GICV3 87 #define GICD_BASE 0x5fe00000 88 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 89 #define GICR_BASE 0x5fe40000 90 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 91 #define GICR_BASE 0x5fe80000 92 #endif 93 #elif !defined(CONFIG_ARM64) 94 /* Time clock 1MHz */ 95 #define CONFIG_SYS_TIMER_RATE 1000000 96 #endif 97 98 #define CONFIG_SYS_MAX_NAND_DEVICE 1 99 #define CONFIG_SYS_NAND_MAX_CHIPS 2 100 #define CONFIG_SYS_NAND_ONFI_DETECTION 101 102 #define CONFIG_NAND_DENALI_ECC_SIZE 1024 103 104 #ifdef CONFIG_ARCH_UNIPHIER_SLD3 105 #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 106 #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 107 #else 108 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 109 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 110 #endif 111 112 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) 113 114 #define CONFIG_SYS_NAND_USE_FLASH_BBT 115 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 116 117 /* USB */ 118 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 119 #define CONFIG_FAT_WRITE 120 121 /* SD/MMC */ 122 #define CONFIG_SUPPORT_EMMC_BOOT 123 124 /* memtest works on */ 125 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 126 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) 127 128 /* 129 * Network Configuration 130 */ 131 #define CONFIG_SERVERIP 192.168.11.1 132 #define CONFIG_IPADDR 192.168.11.10 133 #define CONFIG_GATEWAYIP 192.168.11.1 134 #define CONFIG_NETMASK 255.255.255.0 135 136 #define CONFIG_LOADADDR 0x84000000 137 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 138 139 #define CONFIG_CMDLINE_EDITING /* add command line history */ 140 141 #if defined(CONFIG_ARM64) && !defined(CONFIG_ARMV8_MULTIENTRY) 142 /* ARM Trusted Firmware */ 143 #define BOOT_IMAGES \ 144 "second_image=unph_bl.bin\0" \ 145 "third_image=fip.bin\0" 146 #else 147 #define BOOT_IMAGES \ 148 "second_image=u-boot-spl.bin\0" \ 149 "third_image=u-boot.bin\0" 150 #endif 151 152 #define CONFIG_BOOTCOMMAND "run $bootmode" 153 154 #define CONFIG_ROOTPATH "/nfs/root/path" 155 #define CONFIG_NFSBOOTCOMMAND \ 156 "setenv bootargs $bootargs root=/dev/nfs rw " \ 157 "nfsroot=$serverip:$rootpath " \ 158 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ 159 "run __nfsboot" 160 161 #ifdef CONFIG_FIT 162 #define CONFIG_BOOTFILE "fitImage" 163 #define LINUXBOOT_ENV_SETTINGS \ 164 "fit_addr=0x00100000\0" \ 165 "fit_addr_r=0x84100000\0" \ 166 "fit_size=0x00f00000\0" \ 167 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ 168 "bootm $fit_addr\0" \ 169 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ 170 "bootm $fit_addr_r\0" \ 171 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ 172 "bootm $fit_addr_r\0" \ 173 "__nfsboot=run tftpboot\0" 174 #else 175 #ifdef CONFIG_ARM64 176 #define CONFIG_BOOTFILE "Image.gz" 177 #define LINUXBOOT_CMD "booti" 178 #define KERNEL_ADDR_LOAD "kernel_addr_load=0x84200000\0" 179 #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" 180 #else 181 #define CONFIG_BOOTFILE "zImage" 182 #define LINUXBOOT_CMD "bootz" 183 #define KERNEL_ADDR_LOAD "kernel_addr_load=0x80208000\0" 184 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" 185 #endif 186 #define LINUXBOOT_ENV_SETTINGS \ 187 "fdt_addr=0x00100000\0" \ 188 "fdt_addr_r=0x84100000\0" \ 189 "fdt_size=0x00008000\0" \ 190 "kernel_addr=0x00200000\0" \ 191 KERNEL_ADDR_LOAD \ 192 KERNEL_ADDR_R \ 193 "kernel_size=0x00800000\0" \ 194 "ramdisk_addr=0x00a00000\0" \ 195 "ramdisk_addr_r=0x84a00000\0" \ 196 "ramdisk_size=0x00600000\0" \ 197 "ramdisk_file=rootfs.cpio.uboot\0" \ 198 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 && " \ 199 "if test $kernel_addr_load = $kernel_addr_r; then " \ 200 "true; " \ 201 "else " \ 202 "unzip $kernel_addr_load $kernel_addr_r; " \ 203 "fi && " \ 204 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ 205 "norboot=setexpr kernel_addr_nor $nor_base + $kernel_addr && " \ 206 "setexpr kernel_size_div4 $kernel_size / 4 && " \ 207 "cp $kernel_addr_nor $kernel_addr_load $kernel_size_div4 && " \ 208 "setexpr ramdisk_addr_nor $nor_base + $ramdisk_addr && " \ 209 "setexpr ramdisk_size_div4 $ramdisk_size / 4 && " \ 210 "cp $ramdisk_addr_nor $ramdisk_addr_r $ramdisk_size_div4 && " \ 211 "setexpr fdt_addr_nor $nor_base + $fdt_addr && " \ 212 "setexpr fdt_size_div4 $fdt_size / 4 && " \ 213 "cp $fdt_addr_nor $fdt_addr_r $fdt_size_div4 && " \ 214 "run boot_common\0" \ 215 "nandboot=nand read $kernel_addr_load $kernel_addr $kernel_size && " \ 216 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ 217 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ 218 "run boot_common\0" \ 219 "tftpboot=tftpboot $kernel_addr_load $bootfile && " \ 220 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ 221 "tftpboot $fdt_addr_r $fdt_file &&" \ 222 "run boot_common\0" \ 223 "__nfsboot=tftpboot $kernel_addr_load $bootfile && " \ 224 "tftpboot $fdt_addr_r $fdt_file &&" \ 225 "setenv ramdisk_addr_r - &&" \ 226 "run boot_common\0" 227 #endif 228 229 #define CONFIG_EXTRA_ENV_SETTINGS \ 230 "netdev=eth0\0" \ 231 "verify=n\0" \ 232 "initrd_high=0xffffffffffffffff\0" \ 233 "nor_base=0x42000000\0" \ 234 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ 235 "tftpboot $tmp_addr $second_image && " \ 236 "setexpr tmp_addr $nor_base + 0x70000 && " \ 237 "tftpboot $tmp_addr $third_image\0" \ 238 "emmcupdate=mmcsetn &&" \ 239 "mmc partconf $mmc_first_dev 0 1 1 &&" \ 240 "tftpboot $second_image && " \ 241 "mmc write $loadaddr 0 100 && " \ 242 "tftpboot $third_image && " \ 243 "mmc write $loadaddr 100 700\0" \ 244 "nandupdate=nand erase 0 0x00100000 &&" \ 245 "tftpboot $second_image && " \ 246 "nand write $loadaddr 0 0x00020000 && " \ 247 "tftpboot $third_image && " \ 248 "nand write $loadaddr 0x00020000 0x000e0000\0" \ 249 BOOT_IMAGES \ 250 LINUXBOOT_ENV_SETTINGS 251 252 #define CONFIG_SYS_BOOTMAPSZ 0x20000000 253 254 #define CONFIG_SYS_SDRAM_BASE 0x80000000 255 #define CONFIG_NR_DRAM_BANKS 3 256 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ 257 #define CONFIG_SYS_MEM_TOP_HIDE 64 258 259 #define CONFIG_PANIC_HANG 260 261 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) 262 263 /* only for SPL */ 264 #if defined(CONFIG_ARM64) 265 #define CONFIG_SPL_TEXT_BASE 0x30000000 266 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ 267 defined(CONFIG_ARCH_UNIPHIER_LD4) || \ 268 defined(CONFIG_ARCH_UNIPHIER_SLD8) 269 #define CONFIG_SPL_TEXT_BASE 0x00040000 270 #else 271 #define CONFIG_SPL_TEXT_BASE 0x00100000 272 #endif 273 274 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 275 #define CONFIG_SPL_STACK (0x30014c00) 276 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 277 #define CONFIG_SPL_STACK (0x3001c000) 278 #else 279 #define CONFIG_SPL_STACK (0x00100000) 280 #endif 281 282 #define CONFIG_SPL_FRAMEWORK 283 #ifdef CONFIG_ARM64 284 #define CONFIG_SPL_BOARD_LOAD_IMAGE 285 #endif 286 287 #define CONFIG_SPL_BOARD_INIT 288 289 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x20000 290 291 /* subtract sizeof(struct image_header) */ 292 #define CONFIG_SYS_UBOOT_BASE (0x70000 - 0x40) 293 294 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 295 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 296 #if defined(CONFIG_ARCH_UNIPHIER_LD20) 297 #define CONFIG_SPL_MAX_SIZE 0x14000 298 #else 299 #define CONFIG_SPL_MAX_SIZE 0x10000 300 #endif 301 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 302 #define CONFIG_SPL_BSS_START_ADDR 0x30012000 303 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 304 #define CONFIG_SPL_BSS_START_ADDR 0x30016000 305 #endif 306 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 307 308 #define CONFIG_SPL_PAD_TO 0x20000 309 310 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ 311