1 /* 2 * Copyright (C) 2012-2015 Masahiro Yamada <yamada.masahiro@socionext.com> 3 * 4 * SPDX-License-Identifier: GPL-2.0+ 5 */ 6 7 /* U-Boot - Common settings for UniPhier Family */ 8 9 #ifndef __CONFIG_UNIPHIER_COMMON_H__ 10 #define __CONFIG_UNIPHIER_COMMON_H__ 11 12 #define CONFIG_I2C_EEPROM 13 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 14 15 #define CONFIG_SMC911X 16 17 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */ 18 #define CONFIG_SMC911X_BASE 0 19 #define CONFIG_SMC911X_32_BIT 20 21 /*----------------------------------------------------------------------- 22 * MMU and Cache Setting 23 *----------------------------------------------------------------------*/ 24 25 /* Comment out the following to enable L1 cache */ 26 /* #define CONFIG_SYS_ICACHE_OFF */ 27 /* #define CONFIG_SYS_DCACHE_OFF */ 28 29 #define CONFIG_SYS_CACHELINE_SIZE 32 30 31 /* Comment out the following to disable L2 cache */ 32 #define CONFIG_UNIPHIER_L2CACHE_ON 33 34 #define CONFIG_DISPLAY_CPUINFO 35 #define CONFIG_DISPLAY_BOARDINFO 36 #define CONFIG_MISC_INIT_F 37 #define CONFIG_BOARD_EARLY_INIT_F 38 #define CONFIG_BOARD_EARLY_INIT_R 39 #define CONFIG_BOARD_LATE_INIT 40 41 #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) 42 43 #define CONFIG_TIMESTAMP 44 45 /* FLASH related */ 46 #define CONFIG_MTD_DEVICE 47 48 /* 49 * uncomment the following to disable FLASH related code. 50 */ 51 /* #define CONFIG_SYS_NO_FLASH */ 52 53 #define CONFIG_FLASH_CFI_DRIVER 54 #define CONFIG_SYS_FLASH_CFI 55 56 #define CONFIG_SYS_MAX_FLASH_SECT 256 57 #define CONFIG_SYS_MONITOR_BASE 0 58 #define CONFIG_SYS_MONITOR_LEN 0x00080000 /* 512KB */ 59 #define CONFIG_SYS_FLASH_BASE 0 60 61 /* 62 * flash_toggle does not work for out supoort card. 63 * We need to use flash_status_poll. 64 */ 65 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL 66 67 #define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */ 68 69 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1 70 71 /* serial console configuration */ 72 #define CONFIG_BAUDRATE 115200 73 74 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64) 75 #define CONFIG_USE_ARCH_MEMSET 76 #define CONFIG_USE_ARCH_MEMCPY 77 #endif 78 79 #define CONFIG_SYS_LONGHELP /* undef to save memory */ 80 81 #define CONFIG_CMDLINE_EDITING /* add command line history */ 82 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ 83 /* Print Buffer Size */ 84 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16) 85 #define CONFIG_SYS_MAXARGS 16 /* max number of command */ 86 /* Boot Argument Buffer Size */ 87 #define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE) 88 89 #define CONFIG_CONS_INDEX 1 90 91 /* #define CONFIG_ENV_IS_NOWHERE */ 92 /* #define CONFIG_ENV_IS_IN_NAND */ 93 #define CONFIG_ENV_IS_IN_MMC 94 #define CONFIG_ENV_OFFSET 0x80000 95 #define CONFIG_ENV_SIZE 0x2000 96 /* #define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */ 97 98 #define CONFIG_SYS_MMC_ENV_DEV 0 99 #define CONFIG_SYS_MMC_ENV_PART 1 100 101 #ifdef CONFIG_ARM64 102 #define CPU_RELEASE_ADDR 0x80000000 103 #define COUNTER_FREQUENCY 50000000 104 #define CONFIG_GICV3 105 #define GICD_BASE 0x5fe00000 106 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 107 #define GICR_BASE 0x5fe40000 108 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 109 #define GICR_BASE 0x5fe80000 110 #endif 111 #else 112 /* Time clock 1MHz */ 113 #define CONFIG_SYS_TIMER_RATE 1000000 114 #endif 115 116 117 #define CONFIG_SYS_MAX_NAND_DEVICE 1 118 #define CONFIG_SYS_NAND_MAX_CHIPS 2 119 #define CONFIG_SYS_NAND_ONFI_DETECTION 120 121 #define CONFIG_NAND_DENALI_ECC_SIZE 1024 122 123 #ifdef CONFIG_ARCH_UNIPHIER_SLD3 124 #define CONFIG_SYS_NAND_REGS_BASE 0xf8100000 125 #define CONFIG_SYS_NAND_DATA_BASE 0xf8000000 126 #else 127 #define CONFIG_SYS_NAND_REGS_BASE 0x68100000 128 #define CONFIG_SYS_NAND_DATA_BASE 0x68000000 129 #endif 130 131 #define CONFIG_SYS_NAND_BASE (CONFIG_SYS_NAND_DATA_BASE + 0x10) 132 133 #define CONFIG_SYS_NAND_USE_FLASH_BBT 134 #define CONFIG_SYS_NAND_BAD_BLOCK_POS 0 135 136 /* USB */ 137 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2 138 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS 4 139 #define CONFIG_FAT_WRITE 140 #define CONFIG_DOS_PARTITION 141 142 /* SD/MMC */ 143 #define CONFIG_SUPPORT_EMMC_BOOT 144 #define CONFIG_GENERIC_MMC 145 146 /* memtest works on */ 147 #define CONFIG_SYS_MEMTEST_START CONFIG_SYS_SDRAM_BASE 148 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_SDRAM_BASE + 0x01000000) 149 150 #define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */ 151 152 /* 153 * Network Configuration 154 */ 155 #define CONFIG_SERVERIP 192.168.11.1 156 #define CONFIG_IPADDR 192.168.11.10 157 #define CONFIG_GATEWAYIP 192.168.11.1 158 #define CONFIG_NETMASK 255.255.255.0 159 160 #define CONFIG_LOADADDR 0x84000000 161 #define CONFIG_SYS_LOAD_ADDR CONFIG_LOADADDR 162 163 #define CONFIG_CMDLINE_EDITING /* add command line history */ 164 165 #define CONFIG_BOOTCOMMAND "run $bootmode" 166 167 #define CONFIG_ROOTPATH "/nfs/root/path" 168 #define CONFIG_NFSBOOTCOMMAND \ 169 "setenv bootargs $bootargs root=/dev/nfs rw " \ 170 "nfsroot=$serverip:$rootpath " \ 171 "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \ 172 "run __nfsboot" 173 174 #ifdef CONFIG_FIT 175 #define CONFIG_BOOTFILE "fitImage" 176 #define LINUXBOOT_ENV_SETTINGS \ 177 "fit_addr=0x00100000\0" \ 178 "fit_addr_r=0x84100000\0" \ 179 "fit_size=0x00f00000\0" \ 180 "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \ 181 "bootm $fit_addr\0" \ 182 "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \ 183 "bootm $fit_addr_r\0" \ 184 "tftpboot=tftpboot $fit_addr_r $bootfile &&" \ 185 "bootm $fit_addr_r\0" \ 186 "__nfsboot=run tftpboot\0" 187 #else 188 #ifdef CONFIG_ARM64 189 #define CONFIG_CMD_BOOTI 190 #define CONFIG_BOOTFILE "Image" 191 #define LINUXBOOT_CMD "booti" 192 #define KERNEL_ADDR_R "kernel_addr_r=0x80080000\0" 193 #define KERNEL_SIZE "kernel_size=0x00c00000\0" 194 #define RAMDISK_ADDR "ramdisk_addr=0x00e00000\0" 195 #else 196 #define CONFIG_BOOTFILE "zImage" 197 #define LINUXBOOT_CMD "bootz" 198 #define KERNEL_ADDR_R "kernel_addr_r=0x80208000\0" 199 #define KERNEL_SIZE "kernel_size=0x00800000\0" 200 #define RAMDISK_ADDR "ramdisk_addr=0x00a00000\0" 201 #endif 202 #define LINUXBOOT_ENV_SETTINGS \ 203 "fdt_addr=0x00100000\0" \ 204 "fdt_addr_r=0x84100000\0" \ 205 "fdt_size=0x00008000\0" \ 206 "kernel_addr=0x00200000\0" \ 207 KERNEL_ADDR_R \ 208 KERNEL_SIZE \ 209 RAMDISK_ADDR \ 210 "ramdisk_addr_r=0x84a00000\0" \ 211 "ramdisk_size=0x00600000\0" \ 212 "ramdisk_file=rootfs.cpio.uboot\0" \ 213 "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \ 214 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \ 215 "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \ 216 "setexpr kernel_size $kernel_size / 4 &&" \ 217 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \ 218 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \ 219 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \ 220 "run boot_common\0" \ 221 "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \ 222 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \ 223 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \ 224 "run boot_common\0" \ 225 "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \ 226 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \ 227 "tftpboot $fdt_addr_r $fdt_file &&" \ 228 "run boot_common\0" \ 229 "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \ 230 "tftpboot $fdt_addr_r $fdt_file &&" \ 231 "tftpboot $fdt_addr_r $fdt_file &&" \ 232 "setenv ramdisk_addr_r - &&" \ 233 "run boot_common\0" 234 #endif 235 236 #define CONFIG_EXTRA_ENV_SETTINGS \ 237 "netdev=eth0\0" \ 238 "verify=n\0" \ 239 "nor_base=0x42000000\0" \ 240 "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&" \ 241 "tftpboot $tmp_addr u-boot-spl.bin &&" \ 242 "setexpr tmp_addr $nor_base + 0x60000 &&" \ 243 "tftpboot $tmp_addr u-boot.bin\0" \ 244 "emmcupdate=mmcsetn &&" \ 245 "mmc partconf $mmc_first_dev 0 1 1 &&" \ 246 "tftpboot u-boot-spl.bin &&" \ 247 "mmc write $loadaddr 0 80 &&" \ 248 "tftpboot u-boot.bin &&" \ 249 "mmc write $loadaddr 80 780\0" \ 250 "nandupdate=nand erase 0 0x00100000 &&" \ 251 "tftpboot u-boot-spl.bin &&" \ 252 "nand write $loadaddr 0 0x00010000 &&" \ 253 "tftpboot u-boot.bin &&" \ 254 "nand write $loadaddr 0x00010000 0x000f0000\0" \ 255 LINUXBOOT_ENV_SETTINGS 256 257 #define CONFIG_SYS_BOOTMAPSZ 0x20000000 258 259 #define CONFIG_SYS_SDRAM_BASE 0x80000000 260 #define CONFIG_NR_DRAM_BANKS 2 261 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */ 262 #define CONFIG_SYS_MEM_TOP_HIDE 64 263 264 #if defined(CONFIG_ARM64) 265 #define CONFIG_SPL_TEXT_BASE 0x30000000 266 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \ 267 defined(CONFIG_ARCH_UNIPHIER_LD4) || \ 268 defined(CONFIG_ARCH_UNIPHIER_SLD8) 269 #define CONFIG_SPL_TEXT_BASE 0x00040000 270 #else 271 #define CONFIG_SPL_TEXT_BASE 0x00100000 272 #endif 273 274 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 275 #define CONFIG_SPL_STACK (0x30014c00) 276 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 277 #define CONFIG_SPL_STACK (0x3001c000) 278 #else 279 #define CONFIG_SPL_STACK (0x00100000) 280 #endif 281 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE) 282 283 #define CONFIG_PANIC_HANG 284 285 #define CONFIG_SPL_FRAMEWORK 286 #define CONFIG_SPL_SERIAL_SUPPORT 287 #define CONFIG_SPL_NOR_SUPPORT 288 #ifdef CONFIG_ARM64 289 #define CONFIG_SPL_BOARD_LOAD_IMAGE 290 #else 291 #define CONFIG_SPL_NAND_SUPPORT 292 #define CONFIG_SPL_MMC_SUPPORT 293 #endif 294 295 #define CONFIG_SPL_LIBCOMMON_SUPPORT /* for mem_malloc_init */ 296 #define CONFIG_SPL_LIBGENERIC_SUPPORT 297 298 #define CONFIG_SPL_BOARD_INIT 299 300 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x10000 301 302 /* subtract sizeof(struct image_header) */ 303 #define CONFIG_SYS_UBOOT_BASE (0x60000 - 0x40) 304 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80 305 306 #define CONFIG_SPL_TARGET "u-boot-with-spl.bin" 307 #define CONFIG_SPL_MAX_FOOTPRINT 0x10000 308 #define CONFIG_SPL_MAX_SIZE 0x10000 309 #if defined(CONFIG_ARCH_UNIPHIER_LD11) 310 #define CONFIG_SPL_BSS_START_ADDR 0x30012000 311 #elif defined(CONFIG_ARCH_UNIPHIER_LD20) 312 #define CONFIG_SPL_BSS_START_ADDR 0x30016000 313 #endif 314 #define CONFIG_SPL_BSS_MAX_SIZE 0x2000 315 316 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */ 317