1 /* 2 * Copyright (C) 2017 Marek Behun <marek.behun@nic.cz> 3 * Copyright (C) 2016 Tomas Hlavacek <tomas.hlavacek@nic.cz> 4 * 5 * SPDX-License-Identifier: GPL-2.0+ 6 */ 7 8 #ifndef _CONFIG_TURRIS_OMNIA_H 9 #define _CONFIG_TURRIS_OMNIA_H 10 11 /* 12 * High Level Configuration Options (easy to change) 13 */ 14 15 #define CONFIG_MISC_INIT_R 16 #define CONFIG_DISPLAY_BOARDINFO_LATE 17 18 /* 19 * TEXT_BASE needs to be below 16MiB, since this area is scrubbed 20 * for DDR ECC byte filling in the SPL before loading the main 21 * U-Boot into it. 22 */ 23 #define CONFIG_SYS_TCLK 250000000 /* 250MHz */ 24 25 /* 26 * Commands configuration 27 */ 28 29 /* I2C support */ 30 #define CONFIG_DM_I2C 31 #define CONFIG_I2C_MUX 32 #define CONFIG_I2C_MUX_PCA954x 33 #define CONFIG_SPL_I2C_MUX 34 #define CONFIG_SYS_I2C_MVTWSI 35 36 /* Watchdog support */ 37 #if !defined(CONFIG_SPL_BUILD) && defined(CONFIG_WDT_ORION) 38 # define CONFIG_WATCHDOG 39 #endif 40 41 /* SPI NOR flash default params, used by sf commands */ 42 #define CONFIG_SF_DEFAULT_SPEED 1000000 43 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_3 44 #define CONFIG_SPI_FLASH 45 #define CONFIG_SPI_FLASH_SPANSION 46 47 /* 48 * SDIO/MMC Card Configuration 49 */ 50 #define CONFIG_SYS_MMC_BASE MVEBU_SDIO_BASE 51 52 /* 53 * SATA/SCSI/AHCI configuration 54 */ 55 #define CONFIG_SCSI_AHCI_PLAT 56 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 2 57 #define CONFIG_SYS_SCSI_MAX_LUN 1 58 #define CONFIG_SYS_SCSI_MAX_DEVICE (CONFIG_SYS_SCSI_MAX_SCSI_ID * \ 59 CONFIG_SYS_SCSI_MAX_LUN) 60 61 /* USB/EHCI configuration */ 62 #define CONFIG_EHCI_IS_TDI 63 64 /* Environment in SPI NOR flash */ 65 #define CONFIG_ENV_OFFSET (3*(1 << 18)) /* 768KiB in */ 66 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 67 #define CONFIG_ENV_SECT_SIZE (256 << 10) /* 256KiB sectors */ 68 69 #define CONFIG_PHY_MARVELL /* there is a marvell phy */ 70 #define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer aneg time */ 71 72 /* PCIe support */ 73 #ifndef CONFIG_SPL_BUILD 74 #define CONFIG_PCI_MVEBU 75 #define CONFIG_PCI_SCAN_SHOW 76 #endif 77 78 #define CONFIG_SYS_ALT_MEMTEST 79 80 /* Keep device tree and initrd in lower memory so the kernel can access them */ 81 #define RELOCATION_LIMITS_ENV_SETTINGS \ 82 "fdt_high=0x10000000\0" \ 83 "initrd_high=0x10000000\0" 84 85 /* Defines for SPL */ 86 #define CONFIG_SPL_SIZE (140 << 10) 87 #define CONFIG_SPL_TEXT_BASE 0x40000030 88 #define CONFIG_SPL_MAX_SIZE (CONFIG_SPL_SIZE - 0x0030) 89 90 #define CONFIG_SPL_BSS_START_ADDR (0x40000000 + CONFIG_SPL_SIZE) 91 #define CONFIG_SPL_BSS_MAX_SIZE (16 << 10) 92 93 #ifdef CONFIG_SPL_BUILD 94 #define CONFIG_SYS_MALLOC_SIMPLE 95 #endif 96 97 #define CONFIG_SPL_STACK (0x40000000 + ((192 - 16) << 10)) 98 #define CONFIG_SPL_BOOTROM_SAVE (CONFIG_SPL_STACK + 4) 99 #define CONFIG_SPL_DRIVERS_MISC_SUPPORT 100 101 #ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_SPI 102 /* SPL related SPI defines */ 103 # define CONFIG_SPL_SPI_LOAD 104 # define CONFIG_SYS_SPI_U_BOOT_OFFS 0x24000 105 # define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_SPI_U_BOOT_OFFS 106 #endif 107 108 #ifdef CONFIG_TURRIS_OMNIA_SPL_BOOT_DEVICE_MMC 109 /* SPL related MMC defines */ 110 # define CONFIG_SYS_MMC_U_BOOT_OFFS (160 << 10) 111 # define CONFIG_SYS_U_BOOT_OFFS CONFIG_SYS_MMC_U_BOOT_OFFS 112 # ifdef CONFIG_SPL_BUILD 113 # define CONFIG_FIXED_SDHCI_ALIGNED_BUFFER 0x00180000 /* in SDRAM */ 114 # endif 115 #endif 116 117 /* 118 * mv-common.h should be defined after CMD configs since it used them 119 * to enable certain macros 120 */ 121 #include "mv-common.h" 122 123 /* Include the common distro boot environment */ 124 #ifndef CONFIG_SPL_BUILD 125 126 #ifdef CONFIG_MMC 127 #define BOOT_TARGET_DEVICES_MMC(func) func(MMC, mmc, 0) 128 #else 129 #define BOOT_TARGET_DEVICES_MMC(func) 130 #endif 131 132 #ifdef CONFIG_USB_STORAGE 133 #define BOOT_TARGET_DEVICES_USB(func) func(USB, usb, 0) 134 #else 135 #define BOOT_TARGET_DEVICES_USB(func) 136 #endif 137 138 #define BOOT_TARGET_DEVICES(func) \ 139 BOOT_TARGET_DEVICES_MMC(func) \ 140 BOOT_TARGET_DEVICES_USB(func) \ 141 func(PXE, pxe, na) \ 142 func(DHCP, dhcp, na) 143 144 #define KERNEL_ADDR_R __stringify(0x1000000) 145 #define FDT_ADDR_R __stringify(0x2000000) 146 #define RAMDISK_ADDR_R __stringify(0x2200000) 147 #define SCRIPT_ADDR_R __stringify(0x1800000) 148 #define PXEFILE_ADDR_R __stringify(0x1900000) 149 150 #define LOAD_ADDRESS_ENV_SETTINGS \ 151 "kernel_addr_r=" KERNEL_ADDR_R "\0" \ 152 "fdt_addr_r=" FDT_ADDR_R "\0" \ 153 "ramdisk_addr_r=" RAMDISK_ADDR_R "\0" \ 154 "scriptaddr=" SCRIPT_ADDR_R "\0" \ 155 "pxefile_addr_r=" PXEFILE_ADDR_R "\0" 156 157 #include <config_distro_bootcmd.h> 158 159 #define CONFIG_EXTRA_ENV_SETTINGS \ 160 RELOCATION_LIMITS_ENV_SETTINGS \ 161 LOAD_ADDRESS_ENV_SETTINGS \ 162 "fdtfile=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \ 163 "console=ttyS0,115200\0" \ 164 BOOTENV 165 166 #endif /* CONFIG_SPL_BUILD */ 167 168 #endif /* _CONFIG_TURRIS_OMNIA_H */ 169