1 /* SPDX-License-Identifier: GPL-2.0+ */ 2 /* 3 * Copyright (C) 2018 Marek Behun <marek.behun@nic.cz> 4 * 5 * Based on mvebu_armada-37xx.h by Stefan Roese <sr@denx.de> 6 */ 7 8 #ifndef _CONFIG_TURRIS_MOX_H 9 #define _CONFIG_TURRIS_MOX_H 10 11 #define CONFIG_LAST_STAGE_INIT 12 13 /* 14 * High Level Configuration Options (easy to change) 15 */ 16 #define CONFIG_DISPLAY_BOARDINFO_LATE 17 18 /* additions for new ARM relocation support */ 19 #define CONFIG_SYS_SDRAM_BASE 0x00000000 20 21 /* auto boot */ 22 #define CONFIG_PREBOOT 23 24 #define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, \ 25 115200, 230400, 460800, 921600 } 26 27 /* 28 * For booting Linux, the board info and command line data 29 * have to be in the first 8 MB of memory, since this is 30 * the maximum mapped by the Linux kernel during initialization. 31 */ 32 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ 33 #define CONFIG_INITRD_TAG /* enable INITRD tag */ 34 #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ 35 36 #define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buff Size */ 37 38 /* 39 * Size of malloc() pool 40 */ 41 #define CONFIG_SYS_MALLOC_LEN (4 << 20) /* 4MiB for malloc() */ 42 43 /* 44 * Other required minimal configurations 45 */ 46 #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ 47 #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ 48 #define CONFIG_SYS_MEMTEST_START 0x00800000 /* 8M */ 49 #define CONFIG_SYS_MEMTEST_END 0x00ffffff /*(_16M -1) */ 50 #define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ 51 #define CONFIG_SYS_MAXARGS 32 /* max number of command args */ 52 53 #define CONFIG_SYS_ALT_MEMTEST 54 55 /* End of 16M scrubbed by training in bootrom */ 56 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_TEXT_BASE + 0xFF0000) 57 58 /* 59 * I2C 60 */ 61 #define CONFIG_I2C_MV 62 #define CONFIG_SYS_I2C_SLAVE 0x0 63 64 /* 65 * SPI Flash configuration 66 */ 67 #define CONFIG_ENV_SPI_BUS 0 68 #define CONFIG_ENV_SPI_CS 0 69 70 /* SPI NOR flash default params, used by sf commands */ 71 #define CONFIG_SF_DEFAULT_SPEED 20000000 72 #define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 73 #define CONFIG_ENV_SPI_MODE CONFIG_SF_DEFAULT_MODE 74 75 /* Environment in SPI NOR flash */ 76 #define CONFIG_ENV_OFFSET 0x180000 /* as Marvell U-Boot version */ 77 #define CONFIG_ENV_SIZE (64 << 10) /* 64KiB */ 78 #define CONFIG_ENV_SECT_SIZE (64 << 10) /* 64KiB sectors */ 79 80 /* 81 * Ethernet Driver configuration 82 */ 83 #define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ 84 #define CONFIG_ARP_TIMEOUT 200 85 #define CONFIG_NET_RETRY_COUNT 50 86 #define CONFIG_PHY_MARVELL 87 88 #define CONFIG_USB_MAX_CONTROLLER_COUNT (3 + 3) 89 90 #define BOOT_TARGET_DEVICES(func) \ 91 func(MMC, mmc, 0) \ 92 func(USB, usb, 0) \ 93 func(PXE, pxe, na) \ 94 func(DHCP, dhcp, na) 95 96 #include <config_distro_bootcmd.h> 97 98 #define CONFIG_EXTRA_ENV_SETTINGS \ 99 "scriptaddr=0x4d00000\0" \ 100 "pxefile_addr_r=0x4e00000\0" \ 101 "fdt_addr_r=0x4f00000\0" \ 102 "kernel_addr_r=0x5000000\0" \ 103 "ramdisk_addr_r=0x8000000\0" \ 104 BOOTENV 105 106 #endif /* _CONFIG_TURRIS_MOX_H */ 107