xref: /openbmc/u-boot/include/configs/ts4800.h (revision f9268375)
1 /*
2  * Copyright (C) 2015, Savoir-faire Linux Inc.
3  *
4  * Derived from MX51EVK code by
5  *   Guennadi Liakhovetski <lg@denx.de>
6  *   Freescale Semiconductor, Inc.
7  *
8  * Configuration settings for the TS4800 Board
9  *
10  * SPDX-License-Identifier:	GPL-2.0+
11  */
12 
13 #ifndef __CONFIG_H
14 #define __CONFIG_H
15 
16 /* High Level Configuration Options */
17 
18 #define CONFIG_SKIP_LOWLEVEL_INIT	/* U-Boot is a 2nd stage bootloader */
19 
20 #define CONFIG_HW_WATCHDOG
21 
22 #define CONFIG_MACH_TYPE	MACH_TYPE_TS48XX
23 
24 /* text base address used when linking */
25 #define CONFIG_SYS_TEXT_BASE	0x90008000
26 
27 #include <asm/arch/imx-regs.h>
28 
29 /* enable passing of ATAGs */
30 #define CONFIG_CMDLINE_TAG
31 #define CONFIG_SETUP_MEMORY_TAGS
32 #define CONFIG_INITRD_TAG
33 #define CONFIG_REVISION_TAG
34 
35 /*
36  * Size of malloc() pool
37  */
38 #define CONFIG_SYS_MALLOC_LEN		(10 * 1024 * 1024)
39 
40 /*
41  * Hardware drivers
42  */
43 
44 #define CONFIG_MXC_UART
45 #define CONFIG_MXC_UART_BASE	UART1_BASE
46 #define CONFIG_MXC_GPIO
47 
48 /*
49  * SPI Configs
50  * */
51 #define CONFIG_HARD_SPI /* puts SPI: ready */
52 #define CONFIG_MXC_SPI /* driver for the SPI controllers*/
53 
54 /*
55  * MMC Configs
56  * */
57 #define CONFIG_FSL_ESDHC
58 #define CONFIG_SYS_FSL_ESDHC_ADDR	MMC_SDHC1_BASE_ADDR
59 
60 /*
61  * Eth Configs
62  */
63 #define CONFIG_MII
64 #define CONFIG_PHY_SMSC
65 
66 #define CONFIG_FEC_MXC
67 #define IMX_FEC_BASE	        FEC_BASE_ADDR
68 #define CONFIG_ETHPRIME		"FEC"
69 #define CONFIG_FEC_MXC_PHYADDR	0
70 
71 /* allow to overwrite serial and ethaddr */
72 #define CONFIG_ENV_OVERWRITE		/* disable vendor parameters protection (serial#, ethaddr) */
73 #define CONFIG_CONS_INDEX		1 /* use UART0 : used by serial driver */
74 
75 /***********************************************************
76  * Command definition
77  ***********************************************************/
78 
79 /* Environment variables */
80 
81 
82 #define CONFIG_LOADADDR		0x91000000	/* loadaddr env var */
83 
84 #define CONFIG_EXTRA_ENV_SETTINGS \
85 	"script=boot.scr\0" \
86 	"image=zImage\0" \
87 	"fdt_file=imx51-ts4800.dtb\0" \
88 	"fdt_addr=0x90fe0000\0" \
89 	"mmcdev=0\0" \
90 	"mmcpart=2\0" \
91 	"mmcroot=/dev/mmcblk0p3 rootwait rw\0" \
92 	"mmcargs=setenv bootargs root=${mmcroot}\0" \
93 	"addtty=setenv bootargs ${bootargs} console=ttymxc0,${baudrate}\0" \
94 	"loadbootscript=" \
95 		"fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
96 	"bootscript=echo Running bootscript from mmc ...; " \
97 		"source\0" \
98 	"loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image};\0" \
99 	"loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
100 	"mmcboot=echo Booting from mmc ...; " \
101 		"run mmcargs addtty; " \
102 		"if run loadfdt; then " \
103 			"bootz ${loadaddr} - ${fdt_addr}; " \
104 		"else " \
105 			"echo ERR: cannot load FDT; " \
106 		"fi; "
107 
108 
109 #define CONFIG_BOOTCOMMAND \
110 	"mmc dev ${mmcdev}; if mmc rescan; then " \
111 		"if run loadbootscript; then " \
112 			"run bootscript; " \
113 		"else " \
114 			"if run loadimage; then " \
115 				"run mmcboot; " \
116 			"fi; " \
117 		"fi; " \
118 	"fi; "
119 
120 /*
121  * Miscellaneous configurable options
122  */
123 #define CONFIG_SYS_LONGHELP		/* undef to save memory */
124 #define CONFIG_AUTO_COMPLETE
125 
126 #define CONFIG_SYS_LOAD_ADDR		CONFIG_LOADADDR
127 
128 #define CONFIG_CMDLINE_EDITING
129 
130 /*-----------------------------------------------------------------------
131  * Physical Memory Map
132  */
133 #define CONFIG_NR_DRAM_BANKS	1
134 #define PHYS_SDRAM_1		CSD0_BASE_ADDR
135 #define PHYS_SDRAM_1_SIZE	(256 * 1024 * 1024)
136 
137 #define CONFIG_SYS_SDRAM_BASE		(PHYS_SDRAM_1)
138 #define CONFIG_SYS_INIT_RAM_ADDR	(IRAM_BASE_ADDR)
139 #define CONFIG_SYS_INIT_RAM_SIZE	(IRAM_SIZE)
140 
141 #define CONFIG_SYS_INIT_SP_OFFSET \
142 	(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
143 #define CONFIG_SYS_INIT_SP_ADDR \
144 	(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
145 
146 /* Low level init */
147 #define CONFIG_SYS_DDR_CLKSEL	0
148 #define CONFIG_SYS_CLKTL_CBCDR	0x59E35100
149 #define CONFIG_SYS_MAIN_PWR_ON
150 
151 /*-----------------------------------------------------------------------
152  * Environment organization
153  */
154 
155 #define CONFIG_ENV_OFFSET      (6 * 64 * 1024)
156 #define CONFIG_ENV_SIZE        (8 * 1024)
157 #define CONFIG_SYS_MMC_ENV_DEV 0
158 
159 #endif
160