xref: /openbmc/u-boot/include/configs/ts4600.h (revision 92a1babf)
1 /*
2  * (C) Copyright 2016 Savoir-faire Linux Inc.
3  *
4  * Author: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
5  *
6  * Derived from MX28EVK code by
7  *   Fabio Estevam <fabio.estevam@freescale.com>
8  *   Freescale Semiconductor, Inc.
9  *
10  * Configuration settings for the TS4600 Board
11  *
12  * SPDX-License-Identifier:	GPL-2.0+
13  */
14 #ifndef __CONFIGS_TS4600_H__
15 #define __CONFIGS_TS4600_H__
16 
17 /* System configurations */
18 #define CONFIG_MX28				/* i.MX28 SoC */
19 
20 /* U-Boot Commands */
21 #define CONFIG_SYS_NO_FLASH			/* No NOR Flash */
22 
23 /* Memory configuration */
24 #define CONFIG_NR_DRAM_BANKS		1		/* 1 bank of DRAM */
25 #define PHYS_SDRAM_1			0x40000000	/* Base address */
26 #define PHYS_SDRAM_1_SIZE		0x40000000	/* Max 1 GB RAM */
27 #define CONFIG_SYS_SDRAM_BASE		PHYS_SDRAM_1
28 
29 /* Environment */
30 #define CONFIG_ENV_SIZE			(8 * 1024)
31 
32 /* Environment is in MMC */
33 #if defined(CONFIG_CMD_MMC) && defined(CONFIG_ENV_IS_IN_MMC)
34 #define CONFIG_ENV_OFFSET		(256 * 1024)
35 #define CONFIG_SYS_MMC_ENV_DEV		0
36 #endif
37 
38 /* Boot Linux */
39 #define CONFIG_LOADADDR		0x42000000
40 #define CONFIG_SYS_LOAD_ADDR	CONFIG_LOADADDR
41 
42 /* Extra Environment */
43 #define CONFIG_EXTRA_ENV_SETTINGS \
44 	"fdt_addr=0x41000000\0" \
45 	"loadkernel=load mmc ${mmcdev}:${mmcpart} ${loadaddr} zImage\0" \
46 	"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} imx28-ts4600.dtb\0" \
47 	"loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot.ub\0" \
48 	"bootscript=echo Running bootscript from mmc...; " \
49 		"setenv mmcdev 0; " \
50 		"setenv mmcpart 2; " \
51 		"run loadbootscript && source ${loadaddr}; \0" \
52 	"sdboot=echo Booting from SD card ...; " \
53 		"setenv mmcdev 0; " \
54 		"setenv mmcpart 2; " \
55 		"setenv root /dev/mmcblk0p3; " \
56 		"run loadkernel && run loadfdt; \0" \
57 	"startbootsequence=run bootscript || run sdboot \0" \
58 
59 #define CONFIG_BOOTCOMMAND \
60 	"mmc rescan; " \
61 	"run startbootsequence; " \
62 	"setenv cmdline_append console=ttyAMA0,115200; " \
63 	"setenv bootargs root=${root} rootwait rw ${cmdline_append}; " \
64 	"bootz ${loadaddr} - ${fdt_addr}; "
65 
66 /* The rest of the configuration is shared */
67 #include <configs/mxs.h>
68 
69 #endif /* __CONFIGS_TS4600_H__ */
70