xref: /openbmc/u-boot/include/configs/trimslice.h (revision cb379a34)
1 /*
2  *  (C) Copyright 2010-2012
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #include <linux/sizes.h>
12 #include "tegra20-common.h"
13 
14 /* High-level configuration options */
15 #define CONFIG_TEGRA_BOARD_STRING	"Compulab Trimslice"
16 
17 /* Board-specific serial config */
18 #define CONFIG_TEGRA_ENABLE_UARTA
19 #define CONFIG_TEGRA_UARTA_GPU
20 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
21 
22 #define CONFIG_MACH_TYPE		MACH_TYPE_TRIMSLICE
23 
24 /* SPI */
25 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
26 #define CONFIG_CMD_SPI
27 #define CONFIG_CMD_SF
28 
29 /* I2C */
30 #define CONFIG_SYS_I2C_TEGRA
31 #define CONFIG_CMD_I2C
32 
33 /* SD/MMC */
34 #define CONFIG_MMC
35 #define CONFIG_GENERIC_MMC
36 #define CONFIG_TEGRA_MMC
37 #define CONFIG_CMD_MMC
38 
39 /* Environment in SPI */
40 #define CONFIG_ENV_IS_IN_SPI_FLASH
41 #define CONFIG_ENV_SPI_MAX_HZ		48000000
42 #define CONFIG_ENV_SPI_MODE		SPI_MODE_0
43 #define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
44 #define CONFIG_ENV_OFFSET		(512 * 1024)
45 
46 /* USB Host support */
47 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
48 #define CONFIG_USB_EHCI
49 #define CONFIG_USB_EHCI_TEGRA
50 #define CONFIG_USB_STORAGE
51 #define CONFIG_CMD_USB
52 
53 /* USB networking support */
54 #define CONFIG_USB_HOST_ETHER
55 #define CONFIG_USB_ETHER_ASIX
56 
57 /* PCI host support */
58 #define CONFIG_PCI
59 #define CONFIG_PCI_PNP
60 #define CONFIG_CMD_PCI
61 
62 /* PCI networking support */
63 #define CONFIG_RTL8169
64 
65 /* General networking support */
66 #define CONFIG_CMD_DHCP
67 
68 #include "tegra-common-post.h"
69 
70 #endif /* __CONFIG_H */
71