xref: /openbmc/u-boot/include/configs/trimslice.h (revision 8379c799)
1 /*
2  *  (C) Copyright 2010-2012
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #include <linux/sizes.h>
12 #include "tegra20-common.h"
13 
14 /* High-level configuration options */
15 #define V_PROMPT		"Tegra20 (TrimSlice) # "
16 #define CONFIG_TEGRA_BOARD_STRING	"Compulab Trimslice"
17 
18 /* Board-specific serial config */
19 #define CONFIG_TEGRA_ENABLE_UARTA
20 #define CONFIG_TEGRA_UARTA_GPU
21 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
22 
23 #define CONFIG_MACH_TYPE		MACH_TYPE_TRIMSLICE
24 
25 /* SPI */
26 #define CONFIG_TEGRA20_SFLASH
27 #define CONFIG_SPI_FLASH_WINBOND
28 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
29 #define CONFIG_CMD_SPI
30 #define CONFIG_CMD_SF
31 
32 /* I2C */
33 #define CONFIG_SYS_I2C_TEGRA
34 #define CONFIG_CMD_I2C
35 
36 /* SD/MMC */
37 #define CONFIG_MMC
38 #define CONFIG_GENERIC_MMC
39 #define CONFIG_TEGRA_MMC
40 #define CONFIG_CMD_MMC
41 
42 /* Environment in SPI */
43 #define CONFIG_ENV_IS_IN_SPI_FLASH
44 #define CONFIG_ENV_SPI_MAX_HZ		48000000
45 #define CONFIG_ENV_SPI_MODE		SPI_MODE_0
46 #define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
47 #define CONFIG_ENV_OFFSET		(512 * 1024)
48 
49 /* USB Host support */
50 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
51 #define CONFIG_USB_EHCI
52 #define CONFIG_USB_EHCI_TEGRA
53 #define CONFIG_USB_STORAGE
54 #define CONFIG_CMD_USB
55 
56 /* USB networking support */
57 #define CONFIG_USB_HOST_ETHER
58 #define CONFIG_USB_ETHER_ASIX
59 
60 /* PCI host support */
61 #define CONFIG_PCI
62 #define CONFIG_PCI_TEGRA
63 #define CONFIG_PCI_PNP
64 #define CONFIG_CMD_PCI
65 #define CONFIG_CMD_PCI_ENUM
66 
67 /* PCI networking support */
68 #define CONFIG_RTL8169
69 
70 /* General networking support */
71 #define CONFIG_CMD_DHCP
72 
73 #include "tegra-common-post.h"
74 
75 #endif /* __CONFIG_H */
76