xref: /openbmc/u-boot/include/configs/trimslice.h (revision 679f82c3)
1 /*
2  *  (C) Copyright 2010-2012
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #include <linux/sizes.h>
12 #include "tegra20-common.h"
13 
14 /* High-level configuration options */
15 #define CONFIG_TEGRA_BOARD_STRING	"Compulab Trimslice"
16 
17 /* Board-specific serial config */
18 #define CONFIG_TEGRA_ENABLE_UARTA
19 #define CONFIG_TEGRA_UARTA_GPU
20 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
21 
22 #define CONFIG_MACH_TYPE		MACH_TYPE_TRIMSLICE
23 
24 /* SPI */
25 #define CONFIG_TEGRA20_SFLASH
26 #define CONFIG_SPI_FLASH_WINBOND
27 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
28 #define CONFIG_CMD_SPI
29 #define CONFIG_CMD_SF
30 
31 /* I2C */
32 #define CONFIG_SYS_I2C_TEGRA
33 #define CONFIG_CMD_I2C
34 
35 /* SD/MMC */
36 #define CONFIG_MMC
37 #define CONFIG_GENERIC_MMC
38 #define CONFIG_TEGRA_MMC
39 #define CONFIG_CMD_MMC
40 
41 /* Environment in SPI */
42 #define CONFIG_ENV_IS_IN_SPI_FLASH
43 #define CONFIG_ENV_SPI_MAX_HZ		48000000
44 #define CONFIG_ENV_SPI_MODE		SPI_MODE_0
45 #define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
46 #define CONFIG_ENV_OFFSET		(512 * 1024)
47 
48 /* USB Host support */
49 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
50 #define CONFIG_USB_EHCI
51 #define CONFIG_USB_EHCI_TEGRA
52 #define CONFIG_USB_STORAGE
53 #define CONFIG_CMD_USB
54 
55 /* USB networking support */
56 #define CONFIG_USB_HOST_ETHER
57 #define CONFIG_USB_ETHER_ASIX
58 
59 /* PCI host support */
60 #define CONFIG_PCI
61 #define CONFIG_PCI_TEGRA
62 #define CONFIG_PCI_PNP
63 #define CONFIG_CMD_PCI
64 #define CONFIG_CMD_PCI_ENUM
65 
66 /* PCI networking support */
67 #define CONFIG_RTL8169
68 
69 /* General networking support */
70 #define CONFIG_CMD_DHCP
71 
72 #include "tegra-common-post.h"
73 
74 #endif /* __CONFIG_H */
75