xref: /openbmc/u-boot/include/configs/trimslice.h (revision 5cbbd9bd)
1 /*
2  *  (C) Copyright 2010-2012
3  *  NVIDIA Corporation <www.nvidia.com>
4  *
5  * SPDX-License-Identifier:	GPL-2.0+
6  */
7 
8 #ifndef __CONFIG_H
9 #define __CONFIG_H
10 
11 #include <linux/sizes.h>
12 #include "tegra20-common.h"
13 
14 /* High-level configuration options */
15 #define V_PROMPT		"Tegra20 (TrimSlice) # "
16 #define CONFIG_TEGRA_BOARD_STRING	"Compulab Trimslice"
17 
18 /* Board-specific serial config */
19 #define CONFIG_TEGRA_ENABLE_UARTA
20 #define CONFIG_TEGRA_UARTA_GPU
21 #define CONFIG_SYS_NS16550_COM1		NV_PA_APB_UARTA_BASE
22 
23 #define CONFIG_MACH_TYPE		MACH_TYPE_TRIMSLICE
24 
25 /* SPI */
26 #define CONFIG_TEGRA20_SFLASH
27 #define CONFIG_SPI_FLASH
28 #define CONFIG_SPI_FLASH_WINBOND
29 #define CONFIG_SF_DEFAULT_MODE		SPI_MODE_0
30 #define CONFIG_CMD_SPI
31 #define CONFIG_CMD_SF
32 
33 /* I2C */
34 #define CONFIG_SYS_I2C_TEGRA
35 #define CONFIG_CMD_I2C
36 
37 /* SD/MMC */
38 #define CONFIG_MMC
39 #define CONFIG_GENERIC_MMC
40 #define CONFIG_TEGRA_MMC
41 #define CONFIG_CMD_MMC
42 
43 /* Environment in SPI */
44 #define CONFIG_ENV_IS_IN_SPI_FLASH
45 #define CONFIG_ENV_SPI_MAX_HZ		48000000
46 #define CONFIG_ENV_SPI_MODE		SPI_MODE_0
47 #define CONFIG_ENV_SECT_SIZE		CONFIG_ENV_SIZE
48 #define CONFIG_ENV_OFFSET		(512 * 1024)
49 
50 /* USB Host support */
51 #define CONFIG_USB_MAX_CONTROLLER_COUNT 3
52 #define CONFIG_USB_EHCI
53 #define CONFIG_USB_EHCI_TEGRA
54 #define CONFIG_USB_STORAGE
55 #define CONFIG_CMD_USB
56 
57 /* USB networking support */
58 #define CONFIG_USB_HOST_ETHER
59 #define CONFIG_USB_ETHER_ASIX
60 
61 /* PCI host support */
62 #define CONFIG_PCI
63 #define CONFIG_PCI_TEGRA
64 #define CONFIG_PCI_PNP
65 #define CONFIG_CMD_PCI
66 #define CONFIG_CMD_PCI_ENUM
67 
68 /* PCI networking support */
69 #define CONFIG_RTL8169
70 
71 /* General networking support */
72 #define CONFIG_CMD_NET
73 #define CONFIG_CMD_DHCP
74 
75 #include "tegra-common-post.h"
76 
77 #endif /* __CONFIG_H */
78